Oops ye sorry I put the information in wrong on the graph it shows "Temperature_at_probe_1:_22.80c" I have since changed the message to:
{statusColour} Probe 1(c): Temperature: 22.70 {statusColour} Probe 2(c): Temperature: 20.00
But now it just shows Probe : nan(cur) : nan(max) : nan(min)....
How do I send my NCV setup? The only thing I can think of is from hobbitserver.cfg:
TEST2RRD="......temperature=ncv"
NCV_temperature="Temperature:GAUGE,Temperature:GAUGE"
Thanks, Jason.
-----Original Message----- From: Charles Goyard [mailto:cgoyard at cvf.fr] Sent: 07 November 2006 17:39 To: hobbit at hswn.dk Subject: Re: [hobbit] rrd graphs for devmon scripts
The NCV backend should takes care of it :
/* If extra data after the value, skip to end of line */What beats me is that the spaces should have been stripped off :
"Temperature at probe 1" should be "Temperatureatprobe1".
So I believe the problem is elsewhere.
Could you sent your NCV setup to the list ?
Jason, beware that DS names (once stripped) are limited to 19 characters, it may bite you in the future if you use such long names. (I'm finishing a patch that breaks this limit).
Gildas Le Nadan wrote :
"22.80c" is not a number, is it?
(just thinking out loudly)
Gildas
green Temperature at probe 1: 22.80c
(the message made via devmon) gets plotted as:
Temperature at probe 1: 22.80c : nan(cur) : nan(max) : nan(min) ?..
-- Charles Goyard - cgoyard at cvf.fr - (+33) 1 45 38 01 31
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk