Hi
There?s no difference in the data sent between TCP / HTTP(S) transport (aside from a flag at the end to indicate whether TCP or HTTP was used).
You probably know you can look at the xymon-lastcollect.txt log to see what is being sent. This log will get overwritten every time the client sends the data but you can retain and rotate the last so many versions using <clientlogretain>number</clientlogretain> in xymonclient_config.xml e.g. <clientlogretain>5</clientlogretain> to keep the last 5 copies, which may be helpful. The client will rotate the files so you should not run out of space.
Zak
From: Xymon <xymon-bounces at xymon.com> On Behalf Of Jeremy Laidman Sent: 27 May 2021 04:39 To: Kris Springer <kspringer at innovateteam.com> Cc: Xymon MailingList <xymon at xymon.com> Subject: [External] Re: [Xymon] cpu rrd files not being generated
This message is from an EXTERNAL SENDER - be CAUTIOUS, particularly with links and attachments.
On Thu, 27 May 2021 at 03:16, Kris Springer <kspringer at innovateteam.com<mailto:kspringer at innovateteam.com>> wrote: I added a new Windows host yesterday and I'm using XymonPSClient v2.41 and data is coming into server encrypted over port 443. All data seems to be coming in just fine, and disk/memory/tcp graphs were auto generated and work fine. But the cpu graph did not generate. I am receiving the cpu stats but the la.rrd file did not get created. I cleared the hosts data and let everything auto generate again, but the same result occurred with no la.rrd file being created. I added 7 more new hosts all using the same XymonPSClient over port 443 and the same missing cpu graphs occurred with all of them.
Firstly, RRD seems to need two consecutive samples to start outputting RRD data in graphs. If it only gets one, it doesn't show the data in graphs. Or something like that. Sometimes you need to give it a bit of time. If a sample is rejected due to being non-contiguous, I'd expect to see a log message in rrd-data.log or rrd-status.log (depending on the test).
Disk, memory and CPU all originally come from the client data message. So if you're getting data for one of these, you should be getting for all of these.
I've got other hosts using the same PSClient over 443 and they work just fine. Any ideas?
Same exact version of XymonPSClient?
I've looked through all the xymon logs and found no errors. Server reboot affected nothing.
I added a new host using the same XymonPSClient but NOT sending the data encrypted, just using port 1984, and the cpu graph auto generated correctly. Can anyone give me a clue?
Hmm, interesting. I can't think why that would change the behaviour. Unless XymonPSClient behaves differently in this mode.
Check the client data for a working and a non-working host. Compare the "[cpu]" sections and see if there are any discrepancies. You can do this from the command line like so:
$XYMON $XYMSRV "clientlog <hostname> section=cpu"
If the output of this command for the two hosts both look similar, there's a good chance that the faulty host's message is being parsed correctly. The status essentially looks for "load=NNNN%" where NNNN is one or more digits. It also expects to see "CPU states" but that's not mandatory for a successful data message to be created. If so, you should have a CPU status message.
The RRD data parser looks at the status message contents. It essentially looks for the first line to contain "up: " followed (at some point) by ", load=NNNN%" (or load=NN or load=NN.NN for other OSes). Compare the CPU status messages between the two hosts and see if there are any discrepancies. You can do this from the command line like so:
$XYMON $XYMSRV "xymondlog <hostname>.cpu"
If there is no difference in the structure of these messages, then both should be correctly handled by the RRD parser and the la.rrd file should be created. If this doesn't show any problems, but the la.rrd file still isn't being updated (double-check using "rrdtool fetch <filename> AVERAGE | tail" or similar), then you might need to run xymond_rrd with the "--debug" flag, and look for helpful output in rrd-status.log.
Cheers Jeremy
This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. Your privacy is important to us. Accenture uses your personal data only in compliance with data protection laws. For further information on how Accenture processes your personal data, please see our privacy statement at https://www.accenture.com/us-en/privacy-policy.
www.accenture.com