[hobbit] bb-prtdiag.sh

Hello Joshua,

UNAME command is not defined in etc/bbsys.local ... etc/bbsys.local

I have bb-prtdiag.sh running under hobbit and i set all these variables directly in the script bb-prtdiag.sh. there is no nedd to use bbsys.local (it's only Big-Brother).

And I don't believe I have a program called "fjprtdiag" and it looks to be a necessary component.

The fjprtdiag is the Fujitsu equivalent for prtdiag for Fujitsu PrimePower machines and is not necessary to run the bb-prtdiag.sh All Fujitsu stuff inside bb-prtdiag-sh is written by me.

I attache my version of bb-prtdiag.sh running under hobbit - 2nd try as gzip

Mit freundlichem Gruß

Uwe Kirbach

-- Uwe Kirbach EnBW Systeme Infrastruktur Support GmbH SIS OIOIU Durlacher Allee 93

76131 Karlsruhe

Telefon: +49 (0)721 63 14139 EMail: u.kirbach at enbw.com

EnBW Systeme Infrastruktur Support GmbH Sitz der Gesellschaft: Karlsruhe Handelsregister: Amtsgericht Mannheim HRB 108550 Vorsitzender des Aufsichtsrats: Dr. Bernhard Beck Geschäftsführer: Jochen Adenau, Dr. Peter Kramp

-----Original Message-----
From: Joshua Krause [mailto:forums at triadbiz.rr.com] 
Sent: Monday, January 07, 2008 11:09 PM
To: hobbit at hswn.dk
Subject: [hobbit] bb-prtdiag.sh



I am trying to get the bb-prtdiag.sh script to work on a couple of

Solaris boxes and didn't know if I could get some help from someone in the forum that has it up and running. Currently I am trying to get it to run on a V880 and I am getting this error in the log file:

-bash-3.00$ more bb-prtdiag.log

awk: syntax error near line 1

awk: bailing out near line 1

 

and on the hobbit page I am seeing this:

 

UNAME command is not defined in etc/bbsys.local - using default:

/sbin/uname

PLATFORM_SPEC command is not defined in etc/bbsys.local - using

default: SUNW,Sun-Fire-880

PRTDIAG_COMMAND command is not defined in etc/bbsys.local - using

default: /usr/platform/SUNW,Sun-Fire-880/sbin/prtdiag

PRTDIAG_OPT command is not defined in etc/bbsys.local - using

default: -v

EXCLUDE_SYSTEMS command is not defined in etc/bbsys.local - using

default: Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80 UltraAX-i2 UltraSPARC-IIi-cEngine Sun-Fire Netra-T4 UltraAX-e2 Ultra-Enterprise-10000

PRTDIAG_IGNORE_ERRORS variable is not defined in etc/bbsys.local -

using default: No failures|Most recent AC Power Failure|Minimum Available|CS Fail|No Hardware failures|^===|currently no Boards|Fault Fan

PRTDIAG_IGNORE_FAULTS variable is not defined in etc/bbsys.local -

using default: No Recent System Faults found|No System Faults found|Fault Value|Fault LED|NO_FAULT|Power Fault|Status Fault|Fault off

 And I don't believe I have a program called "fjprtdiag"  and it

looks to be a necessary component.

Thanks,

 

Josh