Hi Charles,
I use the following setting for a single port which I know goes up and down:
DEVMON:model(cisco;3750),except(if_stat;ifName;na:Gi2/0/13)
The if_stat page shows the port as "down" rather than "admin down", but the status remains green for this and all of the other if_* tests.
I'm not sure how best to apply it to all ports of a switch - but a re-read of the devmon config docs would probably show what regex you can use for the port names in lieu of Gi2/0/13. I know I have used the format "if_load;ifName;na:Gi1/0/5|Gi1/0/7|Gi1/0/9|Gi1/0/11" for another switch which frequently gets high loads on some low speed 10Mb/s devices.
HTH, Andy.
-----Original Message----- From: Charles Jones [mailto:jonescr at cisco.com] Sent: Wednesday, 19 September 2007 10:33 a.m. To: hobbit at hswn.dk Subject: [hobbit] devmon question
I've just setup devmon, and would like some advice from other folks who are using it. I poked around the devmon "forums" and needless to say they weren't very helpful. I am currently awaiting moderator approval to
post to the devmon support email list, so thought I would also post it here just in case a fellow Hobbit user that is familiar with devmon could help.
Among the devices I am monitoring is a Cisco 3750 user stack switch. By default, devmon trips a red alarm if a port is in the "down" state. I want this behavior on some of the 3750's I am monitoring, but this particular one I do not, because it would trigger everytime someone powers their workstation off.
So, I am trying to override the threshold via options in bb-hosts. Here is what I am currently using, which is NOT working:
10.10.10.10 user_stack # testip DEVMON:thresh(if_stat;ifOperStatTxt;g:down)
According to my understanding of the docs, this should override the alert color such that it is green when the port is in "down" state. Can
any other devmon users see what I am doing wrong there?
I think I also need to know how to override a single specific port :(
-Charles #####################################################################################
This email is intended for the person to whom it is addressed only. If you are not the intended recipient, do not read, copy or use the contents in any way. The opinions expressed may not necessarily reflect those of ZESPRI Group of Companies ('ZESPRI').
While every effort has been made to verify the information contained herein, ZESPRI does not make any representations as to the accuracy of the information or to the performance of any data, information or the products mentioned herein. ZESPRI will not accept liability for any losses, damage or consequence, however, resulting directly or indirectly from the use of this e-mail/attachments. #####################################################################################