Richard,
Thanks for your reply.
When I think I understand how hobbit works, I seem to get confused again.
I see the modifications you suggest in hobbitclient.cfg and bb-prtdiag. No problem in making these.
I am confused where to set it to execute.
Let me see if I got how hobbit works on the client.
Hobbitlaunch reads the clientlaunch.cfg file.
Clientlaunch.cfg file reads hobbitclient.cfg file and executes hobbitclient.sh
hobbitclient.sh calls hobbitclient-sunos.sh (in my case) which executes the programs in hobbitclient-sunos.sh and writes the output to msg.txt.
4 hobbitclient.sh sends msg.txt to the $BBDISP.
Now I want to execute the bb-prtdiag and bb-prtdiag seems to send the data to $BBDISP inside the script.
Do I put the execution of $BBDISP in clientlaunch.cfg?
What do I need to do on the server side for this to show up in the hobbit html?
Thanks
Robert
From: Deal, Richard [mailto:rdeal at tigr.ORG] Sent: Tuesday, January 24, 2006 8:48 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Repeat entries in bb-hosts
I didnt have to modify bb-prtdiag at all to get it running under the hobbit client. You will have to modify the etc/hobbitclient.cfg file to represent your environment and the bb-prtdiag modifications should also be added. I have these lines added to hobbitclient.cfg: (might be some line modification by email but you get the idea)
#from prtdiag script
UNAME="/sbin/uname"
#PLATFORM_SPEC=${UNAME} -i
#PRTDIAG_COMMAND="/usr/platform/${PLATFORM_SPEC}/sbin/prtdiag"
PRTDIAG_OPT="-v"
ZONENAME=/usr/bin/zonename
#Systems that don't support temperature checks
EXCLUDE_SYSTEMS="Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80
UltraAX-i
2 UltraSPARC-IIi-cEngine Sun-Fire Netra-T4 UltraAX-e2
Ultra-Enterprise-10000"
PRTDIAG_IGNORE_ERRORS="No failures|Most recent AC Power Failure|Minimum
Availabl
e|CS Fail|No Hardware failures|^===|currently no Boards|Fault Fan"
PRTDIAG_IGNORE_FAULTS="No Recent System Faults found|No System Faults
found|Faul
t Value|Fault LED|NO_FAULT|Power Fault|Status Fault|Fault
off"
LOM_COMMAND="/usr/sbin/lom"
LOM_OPT="-pfvt"
Woops there is one slight modification to the bb-prtdiag script. Since
hobbitclient.cfg does not allow for execution, just variable setting, I had
to uncomment these two lines in bb-prtdiag:
PLATFORM_SPEC=$UNAME -i
PRTDIAG_COMMAND="/usr/platform/$PLATFORM_SPEC/sbin/prtdiag"
From: McGraw, Robert P. [mailto:rmcgraw at purdue.edu] Sent: Tuesday, January 24, 2006 8:34 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Repeat entries in bb-hosts
Has anyone rewritten the solaris temperature.sh and bb-prtdiag for hobbit? I would like to get these going on and just did not want to redo work that has already been done.
Thanks
Robert
Robert P. McGraw, Jr. Manager, Computer System EMAIL: rmcgraw at purdue.edu Purdue University ROOM: MATH-807 Department of Mathematics PHONE: (765) 494-6055 150 N. University Street FAX: (419) 821-0540 West Lafayette, IN 47907-2067