Hi J
I do have the IP of the Xymon server in xymonclient.cfg on the hosts which has the client installed. I have checked from the client if the port, 1984 is open and it is.
zeratul etc # telnet 89.22.97.130 1984 Trying 89.22.97.130... Connected to 89.22.97.130. Escape character is '^]'. quit
Unfortunatelly there isn't anything more the the "conn" "info" and "trends" on Xymon server display.
I can't see anything relevant in the xymond logs.
On the hosts which I have the client installed I have this:
zeratul client # ps aufx |grep xymon
root 10279 0.0 0.0 4452 756 pts/1 S+ 12:32 0:00 |
| | \_ grep --colour=auto xymon
root 10115 0.0 0.0 2048 512 ? S 12:30 0:00 sh -c
vmstat 300 2 1>./tmp/xymon_vmstat.zeratul.10083 2>&1; mv
./tmp/xymon_vmstat.zeratul.10083 ./tmp/xymon_vmstat.zeratul
root 10226 0.0 0.0 2028 504 ? Ss 12:31 0:00
./bin/xymonlaunch --config=./etc/clientlaunch.cfg
--log=./logs/clientlaunch.log --pidfile=./logs/clientlaunch.zeratul.pid
root 10263 0.0 0.0 2048 508 ? S 12:31 0:00 sh -c
vmstat 300 2 1>./tmp/xymon_vmstat.zeratul.10231 2>&1; mv
./tmp/xymon_vmstat.zeratul.10231 ./tmp/xymon_vmstat.zeratul
On 01/07/2013 05:11 AM, Jeremy Laidman wrote:
The only configuration required on the Xymon client is the IP address of the Xymon server. Typically, this is configured in the file xymonclient.cfg, where you can set XYMSRV to the correct IP address.
Then you start the client running, perhaps by an init script. The master Xymon client process is xymonlaunch. If this isn't running, then you won't get any local details (cpu, memory, etc).
There are logfiles (on my system, in /var/log/xymon/) that might help identify any problems.
J
On 7 January 2013 06:32, Ciprian Parfon <ciprian.parfon at gmail.com <mailto:ciprian.parfon at gmail.com>> wrote:
Hello I have just installed a fresh xymon server with the latest xymon version. I have also managed to install the client on some external host. Both are running fine and the monitoring page is showing correctly. However I haven't managed to find how can I configure multiple checks on the client side, as for the single host I have added all I have is "conn", "info" and "trends" columns. On the host which is running the xymon client I have the following files which you can see below: zeratul etc # pwd /home/xymon/client/etc zeratul etc # ls -la total 40 drwxr-xr-x 2 xymon root 4096 2013-01-06 19:31 . drwxr-xr-x 8 xymon root 4096 2013-01-06 16:58 .. -rw-r--r-- 1 xymon root 975 2013-01-06 16:58 clientlaunch.cfg -rw-r--r-- 1 xymon root 20959 2013-01-06 16:58 localclient.cfg -rw-r--r-- 1 xymon root 1850 2013-01-06 16:58 xymonclient.cfg I would like to enable at least cpu, load, memory, disk etc ... Where can I make this available? _______________________________________________ Xymon mailing list Xymon at xymon.com <mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
-- Ciprian Parfon System & Network Engineer +40 721879113 ciprian.parfon at gmail.com