[hobbit] UPS monitoring using devmon

thorsten.erdmann at daimler.com wrote:

Hi,

sorry if this a little offtopic, but maybe someone has a devmon template for the following UPS:

Emerson/Liebert HiPulse MM MGE Galaxy Single MGE Upsilon STS_100 Cross switch MGE Upsilon STS_20 Cross switch

Thank you Thorsten

If you are not the intended addressee, please inform us immediately that you have received this e-mail in error, and delete it. We thank you for your cooperation.

I have a template for the standard UPS MIB which I could send through. I have a little more work to do on it splitting the power status into 3 tests for input, output and battery. Should give me motivation to complete this today and I will upload to devmon SF site.

You can check if your UPS supports the standard UPS MIB or wants a proprietary one (substituting for myups below, and your community string if it is not "public"):

snmpwalk -v2c -cpublic myups 1.3.6.1.2.1.33.1.1

Note that some UPS devices only support SNMPv1, so try -v1 instead of -v2c above if it doesn't work.

David.

-- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617

Keep up to date with what's happening in Australian sport visit http://www.ausport.gov.au

This message is intended for the addressee named and may contain confidential and privileged information. If you are not the intended recipient please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. If you receive this message in error, please delete it and notify the sender.