I have to admit it's been quite a while since using xymonping directly. Can you validate the "FPING=" line in xymonserver.cfg with any options being given to it?
Normally, xymon runs an fping-like process with the '-Ae' options, which request elapsed (round-trip) packet time. I don't believe we'd be summing that. Even when extra pings are found for a given IP address (circa line 1400 of xymonnet.c) they're stored in a separate location and don't appear to be summed.
Regards,
-jc
On Tue, August 25, 2015 5:12 am, Galen Johnson wrote:
Actually, you may notice that the ping time is the "total" time of the pings. The avg time is probably what Xymon should be keying on. I'm not where I can check but I think Xymon does a count of 8 or 10 pings so the value you see is likely the sum of all those...in your posting:
--- palazzo.REDACTED.com <http://palazzo.redacted.com/> ping statistics
5 packets transmitted, 5 received, 0% packet loss, time *4003ms* rtt min/avg/max/mdev = 0.572/*0.645*/0.890/0.126 ms
the highlighted value is more in line with what you are seeing when you run it by hand.
On Mon, Aug 24, 2015 at 6:02 PM, Shawn Heisey <hobbit at elyograg.org> wrote:
Here is a "connection times" graph from Xymon:
https://www.dropbox.com/s/voyqnzfnsqaact9/xymonresponsegraph.png?dl=0
This shows "conn" times in the 40 millisecond rang, and "ssh" times in the 200 microsecond range.
What is the source of the "conn" graph? I would have guessed ICMP, but it doesn't make any sense for a ping to take longer than an ssh connection, especially not that much longer. This is what I get if I ping that machine from the xymon server ... it doesn't take anywhere even CLOSE to 40 milliseconds:
[root at mcp xymon]# ping palazzo PING palazzo.REDACTED.com (10.100.2.17) 56(84) bytes of data. 64 bytes from palazzo.REDACTED.com (10.100.2.17): icmp_seq=1 ttl=62 time=0.572 ms 64 bytes from palazzo.REDACTED.com (10.100.2.17): icmp_seq=2 ttl=62 time=0.582 ms 64 bytes from palazzo.REDACTED.com (10.100.2.17): icmp_seq=3 ttl=62 time=0.573 ms 64 bytes from palazzo.REDACTED.com (10.100.2.17): icmp_seq=4 ttl=62 time=0.611 ms 64 bytes from palazzo.REDACTED.com (10.100.2.17): icmp_seq=5 ttl=62 time=0.890 ms ^C --- palazzo.REDACTED.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 0.572/0.645/0.890/0.126 ms
Can anyone shed light on this? My server config includes the following line:
FPING="xymonping"
My xymon server is version 4.3.14.
Thanks, Shawn
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon