Hi William,
all you have to do is including your switches in the bb-hosts, with a line like this:
<ip> <host> # DEVMON
Then, run "devmon --readbbhosts", and the devmon process will start polling the switch.
HTH,
Harald
William Ottley schrieb:
Well we have a few 2600's, and an ASA5500 that I'd like to grab info from, such as up time, bandwidth usage, etc.... I saw that there is a template for cisco ASA so I'm hoping its for that machine.
I'm new at this, and just trying to figure out what "switches" I have to put into the bb-hosts files...
(still haven't figured out what area to change: bb-hosts or the client config files)...
On 19/03/09 9:38 AM, "McDonald, Dan" <Dan.McDonald at austinenergy.com> wrote:
On Wed, 2009-03-18 at 12:29 -0400, William Ottley wrote:
Is there a Cisco monitoring script that I could use? Although you will hear many calls for devmon, devmon does not currently support snmp v3. If that is a requirement for you, then I would recommend using mrtg with appropriate templates, and bbmrtg.pl to report the values to xymon. I use that technique to monitor 135 UPS, 94 temperature/humidity probes, 19 firewalls, and close to 300 Cisco routers/switches.
-- Harald Husemann Netzwerk- und Systemadministrator Operation Management Center (OMC) MATERNA GmbH Information & Communications
Westfalendamm 98 44141 Dortmund
Geschäftsführer: Dr. Winfried Materna, Helmut an de Meulen, Ralph Hartwig Amtsgericht Dortmund HRB 5839
Tel: +49 231 9505 222 Fax: +49 231 9505 100 www.annyway.com <http://www.annyway.com/> www.materna.com <http://www.materna.com/>