On 26/11/12 2:25 PM, Galen Johnson wrote:
Take a look at devmon. It has many templates and presets. devmon does SNMP polling but not SNMP traps.
The link http://cerebro.victoriacollege.edu/hobbit-trap.html is how I have it set up. It's a bit of a fiddle to get running.
You also need to be aware that running MIBs through snmpttconvertmib only passes through the vendor indicated severity. It is worse than annoying when a critical failure event was classified by the vendor as informational and you only find out after it happened! So you must review the snmptt.conf file generated and reclassify as required.
You also need to review snmpttunknown.log regularly to check that you have all relevant MIBs registered, and also that the traps you are receiving were correctly defined in the MIB in the first place - at least it's easy to fudge the snmptt.conf file to fix those. It's not unusual to find devices generating traps that have an extra value in the OID - for example I have 3 variants on Quantum tape library:
EVENT tapeLibNotifyShutdown .1.3.6.1.4.1.3764.1.10.10.1.3.0.0.2 "Status Events" Normal FORMAT An indication that the tape library agent is in the process of $*
EVENT tapeLibNotifyShutdown .1.3.6.1.4.1.3764.1.10.10.3.0.0.2 "Status Events" Normal FORMAT An indication that the tape library agent is in the process of $*
EVENT tapeLibNotifyShutdown .1.3.6.1.4.1.3764.1.10.10.3.0.2 "Status Events" Normal FORMAT An indication that the tape library agent is in the process of $*
It can also be an iterative process to get this correct - I have devices that have just one SNMP trap - essentially a method of reporting a free-text string - so you then need to do regexp matching in snmptt to get alerts more suitable to your needs.
David.
=G=
From: xymon-bounces at xymon.com [xymon-bounces at xymon.com] on behalf of L.M.J [linuxmasterjedi at free.fr] Sent: Tuesday, November 20, 2012 3:07 PM To: xymon at xymon.com Subject: [Xymon] Help also needed : XYmon + SNMP traps
Hi,
I would like to know if anyone here setup a working XYmon + SNMP trap config? I've found this http://cerebro.victoriacollege.edu/hobbit-trap.html, but it's not crystal clear for me, I'm not a SNMP fanboy. Any advices, information or so ?
Thanks
PS : XYmon 4.2.? on Ubuntu.
-- LMJ "May the source be with you my young padawan"
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
-- David Baldwin - Senior Systems Administrator (Datacentres + Networks) Information and Communication Technology Services Australian Sports Commission http://ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617
Keep up to date with what's happening in Australian sport visit http://www.ausport.gov.au