[Xymon] Clariion monitoring

21 Sep 2012 · *).rrd TITLE EMC Lun I/O YAXIS Bytes DEF:rb at RRDIDX@=@RRDFN@:blocks_read:AVERAGE DEF:wb at RRDIDX@=@RRDFN@:blocks_written:AVERAGE CDEF:r at RRDIDX@=rb at RRDIDX@,520,*

      here another one only to graph IO disk activity by LUN:
#!/bin/sh
bbhostgrep emcio*  | while read data;
do
HOST=echo $data | awk '{print $2}';
IP=echo $data | awk '{print $1}';
    datafile="/tmp/.emcio-datafile-$HOST"
    :> $datafile;
    lunlist=`/opt/hobbit/server/ext/navicli -h $IP getlun |grep "LOGICAL UNIT NUMBER" | awk '{print $4}'` 
    for lun in $lunlist
    do
            /opt/hobbit/server/ext/navicli -h $IP getlun $lun > /tmp/.emc-io-$HOST-lun-$lun 2>/dev/null
            if [ $? -eq 0 ]
            then
                    NAME=`egrep ^Name /tmp/.emc-io-$HOST-lun-$lun |sed 's/Name//;s/ //g'`;
                    BLOCK_READ=`grep "Blocks read:" /tmp/.emc-io-$HOST-lun-$lun | head -n1 | awk '{print $3}'`;
                    BLOCK_WRITTEN=`grep "Blocks written:" /tmp/.emc-io-$HOST-lun-$lun | head -n 1 | awk '{print $3}'`;
                    echo $NAME $BLOCK_READ $BLOCK_WRITTEN
                    echo "[emciolun.$NAME.rrd]" >> $datafile
                    echo "DS:blocks_read:DERIVE:600:0:U $BLOCK_READ" >> $datafile
                    echo "DS:blocks_written:DERIVE:600:0:U $BLOCK_WRITTEN" >> $datafile
            fi
    done
    echo "Publishing to hobbit."
    $BB $BBDISP "data $HOST.trends 
cat $datafile
"
done
[emciolun]
FNPATTERN emciolun.(.*).rrd
TITLE EMC Lun I/O
YAXIS Bytes
DEF:rb at RRDIDX@=@RRDFN@:blocks_read:AVERAGE
DEF:wb at RRDIDX@=@RRDFN@:blocks_written:AVERAGE
CDEF:r at RRDIDX@=rb at RRDIDX@,520,*
CDEF:w at RRDIDX@=wb at RRDIDX@,520,*
LINE1:r at RRDIDX@#@COLOR@:@RRDPARAM@ bytes/s Read
-u 100
GPRINT:r at RRDIDX@:LAST: %5.1lf (cur)
GPRINT:r at RRDIDX@:MAX: %5.1lf (max)
GPRINT:r at RRDIDX@:MIN: %5.1lf (min)
GPRINT:r at RRDIDX@:AVERAGE: %5.1lf (avg)\n
LINE1:w at RRDIDX@#@COLOR@:@RRDPARAM@ bytes/s Written
GPRINT:w at RRDIDX@:LAST: %5.1lf (cur)
GPRINT:w at RRDIDX@:MAX: %5.1lf (max)
GPRINT:w at RRDIDX@:MIN: %5.1lf (min)
GPRINT:w at RRDIDX@:AVERAGE: %5.1lf (avg)\n
Le 21 sept. 2012 à 17:15, Scott Pfister a écrit :
...
Here's a script we used to monitor clariion.  It requires the navicli
to be installed on the host that runs the monitoring script. In our
case it was the xymon server.  We also found it better to split the
test accross both service processors.  Hence the SPIP and SPIP2
variables.   Ours had no NAS so we didn't montitor anything there.
This was on the old deadcat site and we tweaked it a little.
#!/bin/sh
#set -x
#-------------------------------------------------
Big Brother - EMC CLARiiON FC-4700 Hardware Agent

This agent monitor the hardware of an EMC
CLARiiON FC-4700 Array using the Navisphere
Command Line Interface (NAVICLI)

Author: Sabey (sabey2000 at hotmail.com)

Feel free to improve or modify.

#==================================================
History
#--------------------------------------------------
Fri Feb 22 11:44:08 MET 2008
added global state yellow and Disk status

Notes:
If a disk failed, it was shown yellow in it`s list, but the global
status was unchanged. This is fixed now

The Disks will show now the status of a binding action in %
the same for replacement of a disk

Tue Aug 19 21:34:15 GMT 2003
Docs and fixes by N. Rettinghouse (rettinghouse.n0spam at att.net)

Notes:
GNU GAWK is needed. (www.sunfreeware.com for Solaris)
Copy clariion.sh into the bb/ext directory.
Add the following to your bb/etc/bb-bbexttab:
localhost : : clariion.sh
A restart of BigBro will be needed after adding bb-bbexttab.
Configure the variables shown below.
Add the BigBrother user to the /etc/Navisphere/agent.config file to
allow running of navicli.
Changed "HW" to "hw" to be consistant with other bb services.
Fixed conflict with $MACHINE BigBro internal variable.
Configure bb-hosts like this:
10.10.30.34 SAN-BigusDiskus # testip noping

#---------------------------------------------------
Thu Sep  4 11:57:48 EDT 2003
Docs and fixes by Sabey (sabey2000 at hotmail.com)

Notes:
Add support to CLARiiON CX600 (maybe all CX series...)

#############################################################################
Set these as needed.
#S#SPIP=172.25.2.239							# One of the two SP IP address
#S#EMC_ARRAY="CLARiiON-1"					# The name of your CLARiiON array
SPIP=							# One of the two SP IP address
SPIP2=							# One of the two SP IP address
EMC_ARRAY="emcsan"					# The name of your CLARiiON array
navicli=/opt/Navisphere/bin/navicli	# Where is the NAVICLI cmd
GAWK=/usr/bin/awk				# need GNU AWK
#############################################################################
#############################################################################
TEST="emc"									# The BB test name
MYTMPFILE=CLARIION_STATUS.$$			# Use a buffer tmp file for NAVICLI output
BBPROG=BB_CLARiiON; export BBPROG  	# ???
##---[Check BBHOME is set]--------------------------------
if test "$BBHOME" = ""; then
echo "BBHOME is not set... exiting"; exit 1
fi
if [ ! -x $GAWK ]; then
echo "This agent need GNU Awk, check GAWK variable"; exit 1
fi
#---[Load bb global parameter]---------------------------
if test ! "$BBTMP"; then
. $BBHOME/etc/bbdef.sh
fi
#---[Collect DATA]---------------------------------------
echo "Status of ${EMC_ARRAY} Storage System" > $BBTMP/ITC_CLARiiON.OUT.$$
echo "============================================================================="
...
...
$BBTMP/ITC_CLARiiON.OUT.$$
#---[1. Get cache
status]---------------------------------------------------------
$navicli -h $SPIP getcache > $BBTMP/$MYTMPFILE
echo "SP Cache" >> $BBTMP/ITC_CLARiiON.OUT.$$
echo "----------------------------" >> $BBTMP/ITC_CLARiiON.OUT.$$
$CAT $BBTMP/$MYTMPFILE | $GAWK '
{
if ($0 ~ /SP Write|Read Cache State/) {
sub ("    *"," ")
if ($0 ~ /State Enabled/) {
sub (" State Enabled","")
sub ("^","\\&green ")
} else {
sub (" State .*","")
sub ("^","\\&red ")
}
if ($0 !~ /SP Read Cache/) {
print
}
}
}' >> $BBTMP/ITC_CLARiiON.OUT.$$
#---[2. Port status]--------------------------------------------------------------
$navicli -h $SPIP2 port -list > $BBTMP/$MYTMPFILE
echo -e "\nSP Link Status" >> $BBTMP/ITC_CLARiiON.OUT.$$
echo "----------------------------" >> $BBTMP/ITC_CLARiiON.OUT.$$
$CAT $BBTMP/$MYTMPFILE | $GAWK '
{
if ($0 ~ /Information about each SPPORT:/) {
FLAG=1
}
if (FLAG == 1) {
if (($0 ~ /SP Name/) || ($0 ~ /SP Port ID/) || ($0 ~ /Link
Status/) || ($0 ~ /Port Status/)) {
sub ("   *","")
if ($0 ~ /SP Name/) {
sub ("SP Name:","")
SP=$0
}
if ($0 ~ /SP Port ID/) {
sub ("SP Port ID:","Port ")
Port=$0
}
if ($0 ~ /Link Status/) {
if ($0 ~ /Status:Up/) {
sub ("Status:Up","\\&green")
} else {
if ((Port == "Port 3") || (Port == "Port 2" )) {
sub ("Status:.*","\\&clear")
} else {
sub ("Status:.*","\\&red")
}
}
LinkS=$0
}
if ($0 ~ /Port Status/) {
if ($0 ~ /Status:Online/) {
sub ("Status:Online","\\&green")
} else {
if ((Port == "Port 3") || (Port == "Port 2" )) {
sub ("Status:.*","\\&clear")
} else {
sub ("Status:.*","\\&red")
}
}
sub ("Port","Status")
PortS=$0
sub ("Status:","",PortS)
sub ("Status:","",LinkS)
print SP,Port,PortS,LinkS
}
}
}
}' >> $BBTMP/ITC_CLARiiON.OUT.$$
#---[3. DPE/DAE
Status]-----------------------------------------------------------
$navicli -h $SPIP getcrus > $BBTMP/$MYTMPFILE
echo -e "\nDPE/DAE Status" >> $BBTMP/ITC_CLARiiON.OUT.$$
echo "----------------------------" >> $BBTMP/ITC_CLARiiON.OUT.$$
$CAT $BBTMP/$MYTMPFILE | $GAWK '
{
if (($0 ~ /[DPE|DAE] Bus . Enclosure ./) || ($0 ~ /State/)) {
if ($0 ~ /State/) {
sub ("Bus . Enclosure . ","")
sub ("   *"," ")
sub ("Power","Power Supply")
if (($0 ~ /State: Present/) || ($0 ~ /State: Valid/)) {
sub (" State:*","")
sub ("^","\\&green ")
}
else {
sub (" State:.*","")
sub ("^","\\&red ")
}
}
if ($0 ~ /[DPE|DAE] Bus . Enclosure ./) {
print ""
}
print
if ($0 ~ /[DPE|DAE] Bus . Enclosure ./) {
print "----------------------------"
}
}
}' >> $BBTMP/ITC_CLARiiON.OUT.$$
#---[4. Disks status]-------------------------------------------------------------
$navicli -h $SPIP2 getdisk -state -rb -bind > $BBTMP/$MYTMPFILE
echo -e "\nDisks Status" >> $BBTMP/ITC_CLARiiON.OUT.$$
echo "----------------------------" >> $BBTMP/ITC_CLARiiON.OUT.$$
$CAT $BBTMP/$MYTMPFILE | $GAWK ' BEGIN { FLAG=0 }
{
if (FLAG == 3) {
FLAG=0
sub ("   *","")
sub ("Prct Bound: *","")
while (sub ("[0123456789]+: +100 *",""))
sub (" +$","%")
bound=$0
if ((hotspare ~ /Enabled/) || (hotspare ~ /Ready/) || (hotspare ~
/Unbound/) || (hotspare ~ /Empty/)) {
print status,"Disk",disk,hotspare
}
else {
  if (hotspare ~ /Binding/) {
status="&green"
print status,"Disk",disk,hotspare,"LUN",bound
  }
  else {
status="&yellow"
print status,"Disk",disk,hotspare,"LUN",rebuild
print status,"Disk",disk," Hostspare=",hotspare,"LUN","
Rebuild=",rebuild
  }
}
}
if (FLAG == 2) {
FLAG=3
sub ("   *","")
sub ("Prct Rebuilt: *","")
while (sub ("[0123456789]+: +100 +",""))
rebuild=$0
}
if (FLAG == 1) {
sub ("   *","")
sub ("State: *","")
status=$0
FLAG=2
hotspare=""
if ($0 ~ /Hot Spare/) {
sub ("Hot Spare ","",status)
hotspare="(Hot Spare)"
}
if (status ~ /Empty/) {
hotspare=$status
status="&clear"
FLAG=3
}
else {
if ((status ~ /Enabled/) || (status ~ /Ready/) || (status ~
/Unbound/) || (status ~ /Binding/) || (status ~ /Expanding/)) {
hotspare=$status
status="&green"
}
else {
if ((status ~ /Copying/) || (status ~ /Equalizing/)) {
hotspare=$status
status="&yellow"
}
else {
hotspare=$status
status="&red"
}
}
}
}
if (($0 ~ /Bus +[0-9]+ +Enclosure +[0-9]+ +Disk +[0-9]+/)) {
sub ("Bus +","")
sub (" +Enclosure +","_")
sub (" +Disk +","_")
disk=$0
FLAG=1
}
}' >> $BBTMP/ITC_CLARiiON.OUT.$$
#---[5. Trespass
status]-------------------------------------------------------------
$navicli -h $SPIP getlun -ismetalun -trespass -status  > $BBTMP/$MYTMPFILE
echo -e "\nTrespass Status" >> $BBTMP/ITC_CLARiiON.OUT.$$
echo "----------------------------" >> $BBTMP/ITC_CLARiiON.OUT.$$
$CAT $BBTMP/$MYTMPFILE | $GAWK '
{
if ($0 ~ /LOGICAL UNIT NUMBER/) {
sub ("LOGICAL UNIT NUMBER ","")
lun=$0
print "lun=",lun
 }
 else {
      if ($0 ~ /Default Owner/) {
      sub ("Default Owner:              ","")
      preffered_sp=$0
print "preferred sp="preffered_sp
      }
      else {
           if ($0 ~ /Current owner/) {
           sub ("Current owner:              ","")
           current_sp=$0
print "current_sp=",current_sp
           status="&yellow"
        if ( length(lun) &lt; 4) {
           print status " Lun " lun " -->\t Default
Owner:",preffered_sp," Current Owner:",current_sp
print status " Lun"
printf "%4s", lun
print " -->\t Default Owner:",preffered_sp," Current Owner:",current_sp
           }
           }
      }
}
}' >> $BBTMP/ITC_CLARiiON.OUT.$$
#---[Check global color output]---
$CAT $BBTMP/ITC_CLARiiON.OUT.$$ | grep \&red > /dev/null 2>&1
ret=$?
if [ "$ret" = "0" ]; then
COLOR=red
else
$CAT $BBTMP/ITC_CLARiiON.OUT.$$ | grep \&yellow > /dev/null 2>&1
ret=$?
if [ "$ret" = "0" ]; then
COLOR=yellow
else
COLOR=green
fi
fi
#---[Generate information to send]---
LINE="status $EMC_ARRAY.$TEST $COLOR date
cat $BBTMP/ITC_CLARiiON.OUT.$$"
#if [ "$COLOR" != "red" ]; then
$RM -f $BBTMP/ITC_CLARiiON.OUT.$$ $BBTMP/$MYTMPFILE
#fi
#---[Send page info to BBDISPLAY]---
$BB $BBDISP "$LINE
$0 running on hostname"
#echo $BB $BBDISP "$LINE"
On Mon, Sep 17, 2012 at 11:37 PM, Vernon Everett
<everett.vernon at gmail.com> wrote:
...
Hi all
Has anybody done any work on monitoring an EMC Clariion system, that they are prepared to share?
I have no idea what I need to monitor yet, and we have nothing in place at the moment, so anything is better than what I have now.
All assistance appreciated.
Regards
Vernon
--
"Accept the challenges so that you can feel the exhilaration of victory"

General George Patton

Xymon mailing list
Xymon at xymon.com
http://lists.xymon.com/mailman/listinfo/xymon

Xymon mailing list
Xymon at xymon.com
http://lists.xymon.com/mailman/listinfo/xymon

[Xymon] Clariion monitoring

nicolas＠lienard.name

Big Brother - EMC CLARiiON FC-4700 Hardware Agent

This agent monitor the hardware of an EMC

CLARiiON FC-4700 Array using the Navisphere

Command Line Interface (NAVICLI)

Author: Sabey (sabey2000 at hotmail.com)

Feel free to improve or modify.

History

Fri Feb 22 11:44:08 MET 2008

added global state yellow and Disk status

Notes:

If a disk failed, it was shown yellow in it`s list, but the global

status was unchanged. This is fixed now

The Disks will show now the status of a binding action in %

the same for replacement of a disk

Tue Aug 19 21:34:15 GMT 2003

Docs and fixes by N. Rettinghouse (rettinghouse.n0spam at att.net)

Notes:

GNU GAWK is needed. (www.sunfreeware.com for Solaris)

Copy clariion.sh into the bb/ext directory.

Add the following to your bb/etc/bb-bbexttab:

localhost : : clariion.sh

A restart of BigBro will be needed after adding bb-bbexttab.

Configure the variables shown below.

Add the BigBrother user to the /etc/Navisphere/agent.config file to

allow running of navicli.

Changed "HW" to "hw" to be consistant with other bb services.

Fixed conflict with $MACHINE BigBro internal variable.

Configure bb-hosts like this:

10.10.30.34 SAN-BigusDiskus # testip noping

Thu Sep 4 11:57:48 EDT 2003

Docs and fixes by Sabey (sabey2000 at hotmail.com)

Notes:

Add support to CLARiiON CX600 (maybe all CX series...)

Set these as needed.

print status,"Disk",disk," Hostspare=",hotspare,"LUN","

print "lun=",lun

print "preferred sp="preffered_sp

print "current_sp=",current_sp

print status " Lun"

printf "%4s", lun

print " -->\t Default Owner:",preffered_sp," Current Owner:",current_sp