The OS we are using are Debian or Ubuntu.
Florent Deschamps
De : Novosielski, Ryan [mailto:novosirj at umdnj.edu] Envoyé : vendredi 4 janvier 2013 07:40 À : 'jlaidman at rebel-it.com.au'; DESCHAMPS Florent Ext DMGP/PORTAIL Cc : 'xymon at xymon.com' Objet : Re: [Xymon] Error compiling Xymon Client in client mode
I could swear I've configured the client side only very recently and did not have difficulty. Supporting evidence is that my Xymon server is SPARC and my Xymon NET machines are x86 and my clients are both Solarises and Linux. Would seem to me at least once I've tried a client-only type between all that, but I'm willing to do it again. What OS is this?
From: Jeremy Laidman [mailto:jlaidman at rebel-it.com.au] Sent: Thursday, January 03, 2013 11:21 PM To: fdeschamps.ext at orange.com<mailto:fdeschamps.ext at orange.com> <fdeschamps.ext at orange.com<mailto:fdeschamps.ext at orange.com>> Cc: xymon at xymon.com<mailto:xymon at xymon.com> <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: Re: [Xymon] Error compiling Xymon Client in client mode
I get the same result when trying to do the same thing (with v4.3.4 and v4.3.10). I think that there's a bug in the way the client is built when using client-side configuration, and nobody uses it anymore so it hasn't been tested for a very long time.
It seems that if you first configure for client-side config, it will not create the lib/xymonclient.a file required. However, if you first configure for server-side config and make, then re-configure for client-side config and make again, this problem goes away.
There are two more problems, it seems: The file xymond/Makefile requires an adjustment for using libxymonclient instead of xymonclient, and some libraries need to be forced to link against it also. So the following adjusted entry in xymond/Makefile worked for me:
../client/xymond_client: $(CLIENTOBJS) ../lib/libxymonclient.a $(CC) -o $@ $(RPATHOPT) $(CLIENTOBJS) ../lib/loadhosts.o ../lib/matching.o ../lib/timing.o ../lib/locator.o ../lib/libxymonclientcomm.a ../lib/libxymonclient.a -lpcre $(PCRELIBS) $(NETLIBS) $(LIBRTDEF)
I note that some of the libraries should have been pulled in with $(PCRELIBS) and $(LIBRTDEF) but these don't seem to have been defined when in client-config mode.
J
On 4 January 2013 02:17, <fdeschamps.ext at orange.com<mailto:fdeschamps.ext at orange.com>> wrote: A rule is missing in one of the Makefile and it can’t compile xymond_client.
The final error is :
make[1]: Entering directory /home/fdeschamps/xymon-4.3.10/xymond' gcc -g -O2 -Wall -Wno-unused -Wno-pointer-sign -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DLINUX -I/home/fdeschamps/xymon-4.3.10/include -DCLIENTONLY=1 -DLOCALCLIENT=1 -I /usr/lib -c -o xymond_client.o xymond_client.c gcc -g -O2 -Wall -Wno-unused -Wno-pointer-sign -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DLINUX -I/home/fdeschamps/xymon-4.3.10/include -DCLIENTONLY=1 -DLOCALCLIENT=1 -I /usr/lib -c -o xymond_worker.o xymond_worker.c gcc -g -O2 -Wall -Wno-unused -Wno-pointer-sign -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DLINUX -I/home/fdeschamps/xymon-4.3.10/include -DCLIENTONLY=1 -DLOCALCLIENT=1 -I /usr/lib -c -o xymond_buffer.o xymond_buffer.c gcc -g -O2 -Wall -Wno-unused -Wno-pointer-sign -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DLINUX -I/home/fdeschamps/xymon-4.3.10/include -DCLIENTONLY=1 -DLOCALCLIENT=1 -I /usr/lib -c -o client_config.o client_config.c make[1]: *** No rule to make target ../lib/xymonclient.a', needed by ../client/xymond_client'. Stop. make[1]: Leaving directory /home/fdeschamps/xymon-4.3.10/xymond'
make: *** [xymond-client] Error 2
The complete output is here : http://pastebin.com/58hm9cXP
Florent Deschamps
De : Novosielski, Ryan [mailto:novosirj at umdnj.edu<mailto:novosirj at umdnj.edu>] Envoyé : jeudi 3 janvier 2013 15:49 À : DESCHAMPS Florent Ext DMGP/PORTAIL; 'xymon at xymon.com<mailto:xymon at xymon.com>' Objet : Re: [Xymon] Error compiling Xymon Client in client mode
I've not seen anywhere where you posted any actual output from your attempts. I'm assuming the compile fails, but how?
From: fdeschamps.ext at orange.com<mailto:fdeschamps.ext at orange.com> [mailto:fdeschamps.ext at orange.com] Sent: Thursday, January 03, 2013 04:15 AM To: xymon at xymon.com<mailto:xymon at xymon.com> <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: Re: [Xymon] Error compiling Xymon Client in client mode
Hello,
I’m still stucked on this problem. ./configure –client + client side configuration does not compile.
Does someone have any idea ?
Thanks
Florent Deschamps
De : xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] De la part de fdeschamps.ext at orange.com<mailto:fdeschamps.ext at orange.com> Envoyé : mardi 18 décembre 2012 11:08 À : xymon at xymon.com<mailto:xymon at xymon.com> Objet : [Xymon] Error compiling Xymon Client in client mode
Hi,
I’m trying to compile to compile the Xymon client in client mode (./configure –client, + client side configuration). I’m using xymon 4.3.10. I’m compiling on ubuntu lucid with pcre and pcre-dev installed. I’m stuck at the build of xymond_client, where it needs xymonclient.a but there is no rule to build it.
Indeed, in xymond/Makefile : ../client/xymond_client: $(CLIENTOBJS) ../lib/xymonclient.a $(CC) -o $@ $(RPATHOPT) $(CLIENTOBJS) ../lib/xymonclient.a $(PCRELIBS) $(NETLIBS) $(LIBRTDEF)
I didn’t find any rules to build xymonclient.a (only a libxymonclient.a in lib/Makefile) Any help would be appreciated.
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration, France Telecom - Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.
This message and its attachments may contain confidential or privileged information that may be protected by law; they should not be distributed, used or copied without authorisation. If you have received this email in error, please notify the sender and delete this message and its attachments. As emails may be altered, France Telecom - Orange is not liable for messages that have been modified, changed or falsified. Thank you.