Have you put that before the DEFAULT settings? Seems to only take affect if the DEFAULT ones are right at the end.
eg:
HOST=hostname.xx.xxxx.com UP 1h LOAD 5.0 10.0 DISK * 90 95 DISK /prod/CD_X86 IGNORE DISK /etc/svc/volatile IGNORE DISK /etc/dfs/dsftab IGNORE FILE /serial_number SIZE>0 yellow MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC cron PROC ncftpd 3 4 PROC ssh DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 DISK /cdrom IGNORE MEMPHYS 100 101 MEMSWAP 75 90 MEMACT 90 97 PROC cron PROC syslogd PROC sshd
On Fri, Jul 3, 2009 at 6:29 AM, Paul Duff <paulduff at tpg.com.au> wrote:
Hi, I have recently installed xymon 4.3.0.0-beta2 on Solaris 10 and everything is working good except that the hobbit-clients.cfg file seems to be ignoring DISK entries. Below is the entry that I have on the server under $xymon_home/server/etc. Have I incorrectly setup the IGNORE entries as they are still being reported on the disk page.
HOST=hostname.xx.xxxx.com UP 1h LOAD 5.0 10.0 DISK * 90 95 DISK /prod/CD_X86 IGNORE DISK /etc/svc/volatile IGNORE DISK /etc/dfs/dsftab IGNORE FILE /serial_number SIZE>0 yellow MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC cron PROC ncftpd 3 4 PROC ssh
Regards Paul
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk