I found out that I could set the information that usually goes in the bbsys.local file in the hobbitclients.cfg file and it picks it up just fine. But currently the bb-prtdiag.sh script is showing a power supply issue but there isnt one:
red Tue Jan 8 11:20:59 EST 2008 redprtdiag reports power error light is off !?!
red prtdiag reports power supply problems !!!
Prtdiag Info (/usr/sbin/prtdiag -v)
prtdiag reports power supply problems !!!
PS0 GOOD 6 7 2 3
PS1 GOOD 6 7 3 3
PS2 GOOD 6 6 3 3
Everything shows good but in the script I saw a section with this info in it:
##### E250/E450/280R/480R/V490/V880/V890/PrimePower specific checks
#####
if [ "$ENV_CHECK" -eq "1" ]; then
# Initialise Variables
# Status are overwritten by prtdiag check
POWER_ERROR_LIGHT_STATUS=" ON"
GEN_ERROR_LIGHT_STATUS="OFF"
DISK_ERROR_LIGHT_STATUS="OFF"
THERM_ERROR_LIGHT="OFF"
PS_ERROR_LIGHT_STATUS="OFF"
ACT_ERROR_LIGHT_STATUS=" ON"
THERM_ERROR_LIGHT_STATUS="OFF"
THERML_ERROR_LIGHT_STATUS="OFF"
THERMR_ERROR_LIGHT_STATUS="OFF"
DOORL_ERROR_LIGHT_STATUS="OFF"
DOORR_ERROR_LIGHT_STATUS="OFF"And wonder if I need to set the POWER_ERROR_LIGHT_STATUS to off instead of ON.
Thanks,
Josh
From: Kirbach Uwe [mailto:U.Kirbach at EnBW.com] Sent: Tuesday, January 08, 2008 8:38 AM To: hobbit at hswn.dk Subject: RE: [hobbit] bb-prtdiag.sh
Hello Joshua,
UNAME command is not defined in etc/bbsys.local
... etc/bbsys.local
I have bb-prtdiag.sh running under hobbit and i set all these variables directly
in the script bb-prtdiag.sh.
there is no nedd to use bbsys.local (it's only Big-Brother).
And I dont believe I have a program called fjprtdiag and it looks to be a necessary component.
The fjprtdiag is the Fujitsu equivalent for prtdiag for Fujitsu PrimePower machines
and is not necessary to run the bb-prtdiag.sh
All Fujitsu stuff inside bb-prtdiag-sh is written by me.
I attache my version of bb-prtdiag.sh running under hobbit - 2nd try as gzip
Mit freundlichem Gruß
Uwe Kirbach
-- Uwe Kirbach EnBW Systeme Infrastruktur Support GmbH SIS OIOIU Durlacher Allee 93
76131 Karlsruhe
Telefon: +49 (0)721 63 14139 EMail: u.kirbach at enbw.com
EnBW Systeme Infrastruktur Support GmbH Sitz der Gesellschaft: Karlsruhe Handelsregister: Amtsgericht Mannheim HRB 108550 Vorsitzender des Aufsichtsrats: Dr. Bernhard Beck Geschäftsführer: Jochen Adenau, Dr. Peter Kramp
-----Original Message----- From: Joshua Krause [mailto:forums at triadbiz.rr.com] Sent: Monday, January 07, 2008 11:09 PM To: hobbit at hswn.dk Subject: [hobbit] bb-prtdiag.sh
I am trying to get the bb-prtdiag.sh script to work on a couple of Solaris boxes and didnt know if I could get some help from someone in the forum that has it up and running. Currently I am trying to get it to run on a V880 and I am getting this error in the log file:
-bash-3.00$ more bb-prtdiag.log
awk: syntax error near line 1
awk: bailing out near line 1
and on the hobbit page I am seeing this:
UNAME command is not defined in etc/bbsys.local - using default: /sbin/uname
PLATFORM_SPEC command is not defined in etc/bbsys.local - using default: SUNW,Sun-Fire-880
PRTDIAG_COMMAND command is not defined in etc/bbsys.local - using default: /usr/platform/SUNW,Sun-Fire-880/sbin/prtdiag
PRTDIAG_OPT command is not defined in etc/bbsys.local - using default: -v
EXCLUDE_SYSTEMS command is not defined in etc/bbsys.local - using default: Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80 UltraAX-i2 UltraSPARC-IIi-cEngine Sun-Fire Netra-T4 UltraAX-e2 Ultra-Enterprise-10000
PRTDIAG_IGNORE_ERRORS variable is not defined in etc/bbsys.local - using default: No failures|Most recent AC Power Failure|Minimum Available|CS Fail|No Hardware failures|^===|currently no Boards|Fault Fan
PRTDIAG_IGNORE_FAULTS variable is not defined in etc/bbsys.local - using default: No Recent System Faults found|No System Faults found|Fault Value|Fault LED|NO_FAULT|Power Fault|Status Fault|Fault off
And I dont believe I have a program called fjprtdiag and it looks to be a necessary component.
Thanks,
Josh