Note that you unpacked the tarball relative to your current directory at the time. If that wasn't /, then you're going to have issues. The last time I installed an hp-ux client, there was a depot installer package available, also.
On Wed, April 2, 2008 02:49, pkc_mls wrote:
Jacob, Davis a écrit :
Hi,
A quick introduction, I am Davis Jacob a member of the System Engineering team.
I am getting a problem when trying to install the client in HPUX machine.
When I untar the client version, I get this message;
tar -xvf hobbit_hpux.tar
x ./etc/rc.config.d/hobbit-client, 880 bytes, 2 tape blocks
x ./sbin/init.d/hobbit-client, 3497 bytes, 7 tape blocks
x ./usr/local/libexec/hobbit/client/bin/bb, 82172 bytes, 161 tape blocks
x ./usr/local/libexec/hobbit/client/bin/bbcmd, 69884 bytes, 137 tape blocks
x ./usr/local/libexec/hobbit/client/bin/bbhostgrep, 86268 bytes, 169 tape blocks
x ./usr/local/libexec/hobbit/client/bin/bbhostshow, 69884 bytes, 137 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitclient-aix.sh, 1452 bytes, 3 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitclient-darwin.sh, 1164 bytes, 3 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitclient-freebsd.sh, 1462 bytes, 3 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitclient-hp-ux.sh, 1565 bytes, 4 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitclient-linux.sh, 1363 bytes, 3 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitclient-netbsd.sh, 1399 bytes, 3 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitclient-openbsd.sh, 1396 bytes, 3 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitclient-osf1.sh, 1346 bytes, 3 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitclient-sunos.sh, 1652 bytes, 4 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitclient.sh, 1387 bytes, 3 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hobbitlaunch, 78076 bytes, 153 tape blocks
x ./usr/local/libexec/hobbit/client/bin/hpux-meminfo, 20732 bytes, 41 tape blocks
x ./usr/local/libexec/hobbit/client/etc/clientlaunch.cfg, 349 bytes, 1 tape blocks
x ./usr/local/libexec/hobbit/client/etc/hobbitclient.cfg, 1783 bytes, 4 tape blocks
this is the config file you need to set up to define your hobbit server.
x ./usr/local/libexec/hobbit/client/runclient.sh, 2962 bytes, 6 tape blocks
the client has to be launched via runclient.sh. or via one of the starting scripts /sbin/init.d/hobbit-client.
x ./usr/local/var/run/hobbitclient-runtime.cfg, 0 bytes, 0 tape blocks
But I dont see any installable in it. The HPUX version running is B.11.11
Can you please help me with this.
Thanks in advance,
Davis
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk