So i finally figured it out.
Since i moved over everything manually i missed one file.
I updated rrddefinitions.cfg and essentially it was working i just couldn't see it.
I had not updated the graph.cfg file once i added the info for if_load and temp it worked ((DOH))
Well at least this won't be bothering me throughout the long weekend.
Joe
Date: Thu, 26 May 2011 00:45:19 -0400 Subject: Re: [Xymon] Devmon on Xymon 4.3.2 - if_load and temp issue for all devmon hosts From: ralphmitchell at gmail.com To: willowbrookmagic at hotmail.com CC: xymon at xymon.com
Quick question - when you say "here are my rrddefinitons for the above", did you put those into server/etc/graphs.cfg, or server/etc/rrddefinitions.cfg??
The rrddefinitions.cfg file is read into a structure that gets handed to rrdtool to create the rrd file if it doesn't exist. All that wants is things that would get passed to "rrdtool create" and it doesn't want a "-l 0" option.
The graphs.cfg file is the place where you describe how to generate the graphs when the cgi program is called to display them.
Ralph Mitchell
On Wed, May 25, 2011 at 2:39 PM, Nick Camaldi <willowbrookmagic at hotmail.com> wrote:
The plot thickens
i compiled this on production made all modifications
moved all my data over and everything works except for if_load and temp. devmon is pulling the data.
here are my rrddefinitons for the above.
[if_load] FNPATTERN if_load.(.*).rrd TITLE Network Traffic YAXIS Bits/second DEF:in at RRDIDX@=@RRDFN@:ds0:AVERAGE CDEF:inbytes at RRDIDX@=in at RRDIDX@,8,* DEF:out at RRDIDX@=@RRDFN@:ds1:AVERAGE CDEF:outbytes at RRDIDX@=out at RRDIDX@,8,* LINE1:inbytes at RRDIDX@#@COLOR@:@RRDPARAM@ In GPRINT:inbytes at RRDIDX@:LAST: %8.2lf %s (cur) GPRINT:inbytes at RRDIDX@:MAX: %8.2lf %s (max) GPRINT:inbytes at RRDIDX@:MIN: %8.2lf %s (min) GPRINT:inbytes at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n LINE1:outbytes at RRDIDX@#@COLOR@:@RRDPARAM@ Out GPRINT:outbytes at RRDIDX@:LAST: %8.2lf %s (cur) GPRINT:outbytes at RRDIDX@:MAX: %8.2lf %s (max) GPRINT:outbytes at RRDIDX@:MIN: %8.2lf %s (avg) GPRINT:outbytes at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n -l 0
[temp] FNPATTERN temp.(.*).rrd TITLE Temperature YAXIS Degrees Celsius DEF:in at RRDIDX@=@RRDFN@:ds0:AVERAGE DEF:out at RRDIDX@=@RRDFN@:ds1:AVERAGE LINE1:in at RRDIDX@#@COLOR@:@RRDPARAM@ Temperature GPRINT:in at RRDIDX@:LAST: %8.2lf %s (cur) GPRINT:in at RRDIDX@:MAX: %8.2lf %s (max) GPRINT:in at RRDIDX@:MIN: %8.2lf %s (min) GPRINT:in at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n #LINE1:out at RRDIDX@#@COLOR@:@RRDPARAM@ Threshold #GPRINT:out at RRDIDX@:LAST: %8.2lf %s (cur) #GPRINT:out at RRDIDX@:MAX: %8.2lf %s (max) #GPRINT:out at RRDIDX@:MIN: %8.2lf %s (avg) #GPRINT:out at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n -l 0
From: bgmilne at staff.telkomsa.net To: willowbrookmagic at hotmail.com Subject: Re: [Xymon] Devmon on Xymon 4.3.2 - if_load and temp issue for all devmon hosts Date: Wed, 25 May 2011 16:02:45 +0200
On Wednesday, 25 May 2011 15:24:27 Nick Camaldi wrote:
RRD files for If_load and temp for all devmon hosts are not working it shows a red x
So the graph definition was not available in your new Xymon configuration.
and not updating i try and remove rrd files for a host and it doesn't re-create.
No need to remove them ...
For this one, most likely your TEST2RRD does not contain the correct 'if_load=devmon' and 'temp=devmon' values, although these are defaults?
Regards, Buchan
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon