All good questions. Hunting for the answers helped me to see some patterns I'd missed before.
The xymon server hostname and IP seem to be consistent, but that's about all that is consistent. There is a separate column for 'disks' on the main webpage and it correctly shows the output from a 'df' command. The script running on the clients' sides is called "raid.sh", the comments at the top of the script indicate it is over a decade old; bb-mdstat.h based on bb-raid.sh. There's a link from /home/xymon-client/ext to /usr/share/xymon-client/ext on most systems. The directory and the scripts in it are owned by either root or xymon. Changing location, ownership, and perms to match one of the working systems hasn't helped.
The broken raid reports are all from Linux boxes. The working reports look like this:
Mon Aug 31 09:38:49 AKDT 2015 RAID ALL devices OK*green md0 Status OK*green md1 Status OK*green md2 Status OK*============================ /proc/mdstat===========================*
Personalities : [raid1] *md0 : active raid1 sdc1[1] sda1[0]*511988 blocks super 1.0 [2/2] [UU]*md2 : active raid1 sdd[3] sdb[2]*536869888 blocks super 1.2 [2/2] [UU]*md1 : active raid1 sdc2[1] sda2[2]*41428924 blocks super 1.1 [2/2] [UU]*bitmap: 1/1 pages [4KB], 65536KB chunk*unused devices: *Run /sbin/mdadm -D /dev/md* for more info*
The non-working systems either show nothing at all (that's better than purple) OR show the same three green md[0-2] devices (whether it has three raid devices or not) on a blue disabled background. So, I'm almost positive someone copied a working system incorrectly to other clients without cleaning up the foreign logs. The working systems overwrote or just aged out the incorrect information while the non-working ones just keep reporting it. I have found logs but none for this raid information. Perhaps the logs are compressed or otherwise rendered humanly unreadable.
So, I copied the /usr/share/xymon-client/ext scripts from a working system to several that were reporting nothing and restarted xymon-client. Most did nothing, one is showing a "no data" indicator. The raid out- put looks normal except the device is md127 - perhaps the high number is confusing the script. But the wbinfo.sh script I copied at the same time to/from the same directory is now showing green. Argh!
I don't even know where the xymon-client scripts running here came from so I'm reluctant (but motivated) to just rip them all out by the roots and start over from a known baseline.
WLR
==================================================================================
Phil Crooker <Phil.Crooker at orix.com.au> 3:57 PM (17 hours ago)
Is the hostname wrong somewhere? I'm thinking maybe the scipt is sending the wrong hostname, somehow....
==================================================================================
Jeremy Laidman <jlaidman at rebel-it.com.au>
7:07 PM (14 hours ago)
On 30 August 2015 at 14:22, Walter Rutherford <wlrutherford at alaska.edu> wrote: This is probably an old issue but I didn't see a way to search the archives.
https://www.google.com/?q=site:lists.xymon.com+purple+raid
Our xymon server is showing purple indicators for two of our custom scripts but only on a handful of systems.
The scripts are running client-side and/or server-side? Can you describe how the scripts work? Are they locally-written scripts or did you get them from somewhere online?
RAID checks are not standard for most Xymon clients. I've never used or seen RAID checks. A quick look at the source code indicates built-in support for only Linux, where "md" devices are identified in /proc/mdstat.
At the bottom of the incorrect raid report page there is a link to "client data". If I follow the link I get a full report including the correct, current raid information!
How is the RAID information getting into the client data? This might not be used by your custom scripts, and so might be a red herring. More detail is required about the raid scripts. Or whether you're using the built-in support for Linux RAID meta-devices reporting with client data in the [mdstat] section. If the latter, perhaps you could show the [mdstat] section of client data?
Cheers
====================================================================================
---------- Forwarded message ---------- From: Walter Rutherford <wlrutherford at alaska.edu> Date: Sat, Aug 29, 2015 at 8:22 PM Subject: purple problems To: Xymon at xymon.com
Hey all,
This is probably an old issue but I didn't see a way to search the archives.
Our xymon server is showing purple indicators for two of our custom scripts but only on a handful of systems. I've found differences in file location, file ownership, UID, GID, etc.. but so far none of that seems to be the problem.
The custom script checks raids. Strangely, all of the stagnant hosts show the same three disks entries from mid-July no matter how many disks they really have. Unfortunately I don't know what may've happened in July; that was before I started working here. I suspect the xymon-client software was copied from a live system, including the old status reports, but in so doing something wasn't re-configured correctly for the new systems.
Even stranger, at my urging the Lead SA undisabled the purple notifications. I was expecting the page to go purple but it remains green even though the page isn't updating. At the bottom of the incorrect raid report page there is a link to "client data". If I follow the link I get a full report *including the correct,* *current raid information*!
I think this means that the client is capturing the correct data and sending it to the server, the server is actually receiving the report, but after that the raid report isn't being handled correctly. Other systems display as expected. So far I haven't found anywhere on the server that the purple systems are configured or handled differently.
I doubt we're the first to experience this problem. Does this sound familiar?
Thanks in advance for any hints you can provide for where to look next.
WLR