I've also run into the GRAPHS= quirk where a graph won't appear on it's status page until it's added to GRAPHS= (for a custom graph I have).
Since GRAPHS= is commented as being for the trends page and not for status pages, I would think this to be a bug. But, I wasn't able to find a bug report for it. Should there be?
(I'm using Xymon 4.3.0-0.20101114.beta3 on CentOS 5.5.)
On Wed, 25 May 2011 15:29 -0400, "KING, KEVIN (ATTSI)" <KK1051 at att.com> wrote:
What I found on my system was if I did not add this to the GRAPHS= section it would not generate the graphs on the test page.
Also make sure devmon::2 is in the Graphs section.
I have found the products are not completely stable. I had to pick and chose what graphs I wanted. If I had to many Devmon based graphs it would break one or two others. I only discovered this when adding my own tests to devmon. If you run what ships to it and make the additions as shown above it should run.
Also you may need to the CGI_SVC_OPTS setting in the cgioptions.cfg file. Here is a sample of what I have added:
svcstatus.cgi options for a normal (current) status display
CGI_SVC_OPTS="--env=$XYMONENV --no-svcid --history=top --multigraphs=disk,if_load,itp_msu,if_dsc,temp"
-Kevin
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Nick Camaldi Sent: Wednesday, May 25, 2011 2:40 PM To: xymon at xymon.com Subject: Re: [Xymon] Devmon on Xymon 4.3.2 - if_load and temp issue for all devmon hosts
The plot thickens
i compiled this on production made all modifications
moved all my data over and everything works except for if_load and temp. devmon is pulling the data.
here are my rrddefinitons for the above.
[if_load] FNPATTERN if_load.(.*).rrd TITLE Network Traffic YAXIS Bits/second DEF:in at RRDIDX@=@RRDFN@:ds0:AVERAGE CDEF:inbytes at RRDIDX@=in at RRDIDX@,8,* DEF:out at RRDIDX@=@RRDFN@:ds1:AVERAGE CDEF:outbytes at RRDIDX@=out at RRDIDX@,8,* LINE1:inbytes at RRDIDX@#@COLOR@:@RRDPARAM@ In GPRINT:inbytes at RRDIDX@:LAST: %8.2lf %s (cur) GPRINT:inbytes at RRDIDX@:MAX: %8.2lf %s (max) GPRINT:inbytes at RRDIDX@:MIN: %8.2lf %s (min) GPRINT:inbytes at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n LINE1:outbytes at RRDIDX@#@COLOR@:@RRDPARAM@ Out GPRINT:outbytes at RRDIDX@:LAST: %8.2lf %s (cur) GPRINT:outbytes at RRDIDX@:MAX: %8.2lf %s (max) GPRINT:outbytes at RRDIDX@:MIN: %8.2lf %s (avg) GPRINT:outbytes at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n -l 0 [temp] FNPATTERN temp.(.*).rrd TITLE Temperature YAXIS Degrees Celsius DEF:in at RRDIDX@=@RRDFN@:ds0:AVERAGE DEF:out at RRDIDX@=@RRDFN@:ds1:AVERAGE LINE1:in at RRDIDX@#@COLOR@:@RRDPARAM@ Temperature GPRINT:in at RRDIDX@:LAST: %8.2lf %s (cur) GPRINT:in at RRDIDX@:MAX: %8.2lf %s (max) GPRINT:in at RRDIDX@:MIN: %8.2lf %s (min) GPRINT:in at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n #LINE1:out at RRDIDX@#@COLOR@:@RRDPARAM@ Threshold #GPRINT:out at RRDIDX@:LAST: %8.2lf %s (cur) #GPRINT:out at RRDIDX@:MAX: %8.2lf %s (max) #GPRINT:out at RRDIDX@:MIN: %8.2lf %s (avg) #GPRINT:out at RRDIDX@:AVERAGE: %8.2lf %s (avg)\n -l 0
From: bgmilne at staff.telkomsa.net To: willowbrookmagic at hotmail.com Subject: Re: [Xymon] Devmon on Xymon 4.3.2 - if_load and temp issue for all devmon hosts Date: Wed, 25 May 2011 16:02:45 +0200
On Wednesday, 25 May 2011 15:24:27 Nick Camaldi wrote:
RRD files for If_load and temp for all devmon hosts are not working it shows a red x
So the graph definition was not available in your new Xymon configuration.
and not updating i try and remove rrd files for a host and it doesn't re-create.
No need to remove them ...
For this one, most likely your TEST2RRD does not contain the correct 'if_load=devmon' and 'temp=devmon' values, although these are defaults?
Regards, Buchan
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon