Hi,
I've set up a hobbit server very successfully with IP address 10.20.4.123. I became a FAN of this monitoring server. But I still have one problem.
We changed our IP range, so I had to change the IP address of the Hobbit server. (10.0.6.13) I was able to adjust all required setting. All test besides the Combotest are working fine now.
When I launch the combotest command from the console it still wants to connect to the old IP address
MMS-test:/opt/mms/server/bin # ./bbcombotest --debug 2008-04-03 13:45:58 Transport setup is: 2008-04-03 13:45:58 bbdportnumber = 1984 2008-04-03 13:45:58 bbdispproxyhost = NONE 2008-04-03 13:45:58 bbdispproxyport = 0 2008-04-03 13:45:58 Recipient listed as '10.20.4.123' 2008-04-03 13:45:58 Standard BB protocol on port 1984 2008-04-03 13:45:58 Will connect to address 10.20.4.123 port 1984 2008-04-03 13:46:01 Connect status is 113 2008-04-03 13:46:01 Could not connect to bbd at 10.20.4.123:1984 - No route to host 2008-04-03 13:46:01 Whoops ! bb failed to send message - Connection failed 2008-04-03 13:46:01 Symbolic '(B32910.mimix&&B32903.mimix)' converted to '(1&&1) ' 2008-04-03 13:46:01 Adding to combo msg: status COMBO.mimix green Thu Apr 3 13:45:58 2008 2008-04-03 13:46:01 Flushing combo message status COMBO.mimix green Thu Apr 3 13:45:58 2008 2008-04-03 13:46:01 Recipient listed as '10.20.4.123' 2008-04-03 13:46:01 Standard BB protocol on port 1984 2008-04-03 13:46:01 Will connect to address 10.20.4.123 port 1984 2008-04-03 13:46:04 Connect status is 113 2008-04-03 13:46:04 Could not connect to bbd at 10.20.4.123:1984 - No route to host 2008-04-03 13:46:04 Whoops ! bb failed to send message - Connection failed 2008-04-03 13:46:04 1 status messages merged into 2 transmissions
Where is the bbcombotest looking for that old IP address? Haw can I change this behaviour?
Best regards
Bart Gillis