Whew. finally got this working. I ended up recompiling everything from scratch and it worked perfectly the first time. I had already done that once, early on, but I guess the third time is the charm. Anyway, thanks everyone for all the very helpful information!
--Dan
From: Ralph Mitchell [mailto:ralphmitchell at gmail.com] Sent: Thursday, July 10, 2008 3:08 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Configuration question
Do you get anything after the "close connection"?? I get a bunch of
init_state(host,domain,com.test, -567484, ...) find_or_create_column(test) init_state: hostname=host.domain.com, testname=test, color=0......
one for each column for each host. What do yuo get from this command:
server/bin/bb localhost "hobbitdboard fields=hostname,testname,color,flags,lastchange,logtime,validtime,acktime,di sabletime,sender,cookie,line1,acklist"
That's all on one line. It's what bbgen does immediately after logging "load_state()"
Ralph
On Thu, Jul 10, 2008 at 12:30 PM, Daniel Elswit <de21 at cornell.edu> wrote:
Ah. got it. I see this:
2008-07-10 12:38:49 load_bbhosts: -- got line '10.35.80.51 test.cals.cornell.edu # noping dns ntp'
2008-07-10 12:38:49 init_host(test.cals.cornell.edu)
2008-07-10 12:38:49 load_state()
2008-07-10 12:38:49 Transport setup is:
2008-07-10 12:38:49 bbdportnumber = 1984
2008-07-10 12:38:49 bbdispproxyhost = NONE
2008-07-10 12:38:49 bbdispproxyport = 0
2008-07-10 12:38:49 Recipient listed as '10.253.209.163'
2008-07-10 12:38:49 Standard BB protocol on port 1984
2008-07-10 12:38:49 Will connect to address 10.253.209.163 port 1984
2008-07-10 12:38:49 Connect status is 0
2008-07-10 12:38:49 Sent 126 bytes
2008-07-10 12:38:49 Read 3601 bytes
2008-07-10 12:38:49 Closing connection
--Dan
From: Ralph Mitchell [mailto:ralphmitchell at gmail.com] Sent: Thursday, July 10, 2008 11:49 AM
To: hobbit at hswn.dk Subject: Re: [hobbit] Configuration question
OK. What I did to get that log was: stop hobbit, change the bbdisplay entry in server/etc/hobbitlaunch.cfg to read:
CMD bbgen $BBGENOPTS --report --debugthen I renamed the bb-display.log file and restarted hobbit. The log fragment I posted came from the new bb-display.log during/after it read through the bb-hosts file.
I guess you wouldn't need to stop/start Hobbit, as it's trying to launch bbgen every minute...
Ralph
On Thu, Jul 10, 2008 at 10:30 AM, Daniel Elswit <de21 at cornell.edu> wrote:
My bb-display.log has not updated in 2 days (not since I had an initial problem related to a missing library that was resolved.) I don't see any of what you have below. The hobbitd.log says "Setup complete". Upon starting of the service, hobbitlaunch.log says:
2008-07-10 11:20:46 hobbitlaunch starting
2008-07-10 11:20:46 Loading tasklist configuration from /usr/bin/hobbit/server/etc/hobbitlaunch.cfg
2008-07-10 11:20:46 Loading hostnames
2008-07-10 11:20:46 Loading saved state
2008-07-10 11:20:46 Setting up network listener on 0.0.0.0:1984
2008-07-10 11:20:46 Setting up signal handlers
2008-07-10 11:20:46 Setting up hobbitd channels
2008-07-10 11:20:46 Setting up logfiles
2008-07-10 11:20:52 Task bbdisplay terminated by signal 6
2008-07-10 11:21:52 Task bbdisplay terminated by signal 6
2008-07-10 11:22:52 Task bbdisplay terminated by signal 6
The bbdisplay errors continue to occur every few minutes.
--Dan
From: Ralph Mitchell [mailto:ralphmitchell at gmail.com] Sent: Thursday, July 10, 2008 10:55 AM
To: hobbit at hswn.dk Subject: Re: [hobbit] Configuration question
On Thu, Jul 10, 2008 at 8:41 AM, Daniel Elswit <de21 at cornell.edu> wrote:
Strangely, bben -debug shows that it cooks right through the bb-hosts file and then after the last line, aborts with no further information. bbgen -version runs properly and shows the correct version. I'm beginning to wonder if the bbgen file itself is corrupted.
This is what I get in my bb-display.log after a restart. The first two lines below are the last two from bb-hosts - a blank comment line and an include:
2008-07-10 09:37:51 load_bbhosts: -- got line '#'
2008-07-10 09:37:51 Opening file /home/hobbit/server/etc/ghosts.inc
2008-07-10 09:37:51 load_state()
2008-07-10 09:37:51 Transport setup is:
2008-07-10 09:37:51 bbdportnumber = 1984
2008-07-10 09:37:51 bbdispproxyhost = NONE
2008-07-10 09:37:51 bbdispproxyport = 0
2008-07-10 09:37:51 Recipient listed as '10.134.13.133'
2008-07-10 09:37:51 Standard BB protocol on port 1984
2008-07-10 09:37:51 Will connect to address 10.134.13.133 port 1984Do you get the "load_state()" ??
Ralph Mitchell