Poling interval at specific time.
Hi All,
I want to make poling interval at specific time. (i) In the KPI(client side custom script), I want to configure poling interval 15 minutes in business hours(from 8:00 AM to 8:00 PM). Rest of the time KPI(client side custom script) should not execute. (ii) In the KPI(client side custom script), I want to execute script specific time (like 10:00 am, 5:00 pm, 9:00 pm etc.).
Kindly help me for the same.
With Thanks & Regards, Jayanta.
Hi Henrik,
I am using Xymon 4.2.3. I didn't found any file named "tasks.cfg" file in client side. In $HOBBITCLIENTHOME/etc/ path following .cfg files are available: (i) clientlaunch.cfg (ii) hobbitclient.cfg (iii) localclient.cfg Could you please describe me in details how can i achieve this.
With Thanks & Regards, Jayanta.
On Sun, May 22, 2011 at 6:32 PM, Henrik Størner <henrik at hswn.dk> wrote:
I want to make poling interval at specific time. (i) In the KPI(client side custom script)
Since it is a custom script you want to run at specific times, use the "CRONDATE" setting in tasks.cfg to specify when it should run.
Regards, Henrik
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Hi All,
I am using Xymon 4.2.3. Could anyone please let me know how can I write a sample script in Client side which should execute every 15 minutes on business hours(9:00 am to 6 pm) every day.
With Thanks & Regards, Jayanta.
On Sun, May 22, 2011 at 6:55 PM, Henrik Størner <henrik at hswn.dk> wrote:
I am using Xymon 4.2.3. I didn't found any file named "tasks.cfg" file in client side.
Then you'll have to run the script via your system 'cron' utility.
Regards, Henrik
Hi Jayanta,
Create a cron job as follows:
*/15 9-18 * * * $PATH_TO_BBCMD $PATH_TO_YOUR_SCRIPT
Optionally if business hours were only Monday to Friday the last asterix would be replaced by 1-5.
Phil
On 23 May 2011 15:02, Jayanta Kundu <jayantak007 at gmail.com> wrote:
Hi All,
I am using Xymon 4.2.3. Could anyone please let me know how can I write a sample script in Client side which should execute every 15 minutes on business hours(9:00 am to 6 pm) every day.
With Thanks & Regards, Jayanta.
On Sun, May 22, 2011 at 6:55 PM, Henrik Størner <henrik at hswn.dk> wrote:
I am using Xymon 4.2.3. I didn't found any file named "tasks.cfg" file in client side.
Then you'll have to run the script via your system 'cron' utility.
Regards, Henrik
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
And at 18:30 every weekday that'll go purple...
It would be better to add code to the top of the script to check the date/time and to send an automatic green (or perhaps blue) status whenever the date/time falls outside the times you want to watch.
Ralph Mitchell
On Mon, May 23, 2011 at 10:13 AM, Phil Meech <pmeech at gmail.com> wrote:
Hi Jayanta,
Create a cron job as follows:
*/15 9-18 * * * $PATH_TO_BBCMD $PATH_TO_YOUR_SCRIPT
Optionally if business hours were only Monday to Friday the last asterix would be replaced by 1-5.
Phil
On 23 May 2011 15:02, Jayanta Kundu <jayantak007 at gmail.com> wrote:
Hi All,
I am using Xymon 4.2.3. Could anyone please let me know how can I write a sample script in Client side which should execute every 15 minutes on business hours(9:00 am to 6 pm) every day.
With Thanks & Regards, Jayanta.
On Sun, May 22, 2011 at 6:55 PM, Henrik Størner <henrik at hswn.dk> wrote:
I am using Xymon 4.2.3. I didn't found any file named "tasks.cfg" file in client side.
Then you'll have to run the script via your system 'cron' utility.
Regards, Henrik
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Oops, good point! I wrote that wondering how much it had to do with Xymon; perhaps had I considered it going purple I would have realised it was more to do with Xymon!
On 23 May 2011 15:26, Ralph Mitchell <ralphmitchell at gmail.com> wrote:
And at 18:30 every weekday that'll go purple... It would be better to add code to the top of the script to check the date/time and to send an automatic green (or perhaps blue) status whenever the date/time falls outside the times you want to watch. Ralph Mitchell
On Mon, May 23, 2011 at 10:13 AM, Phil Meech <pmeech at gmail.com> wrote:
Hi Jayanta,
Create a cron job as follows:
*/15 9-18 * * * $PATH_TO_BBCMD $PATH_TO_YOUR_SCRIPT
Optionally if business hours were only Monday to Friday the last asterix would be replaced by 1-5.
Phil
On 23 May 2011 15:02, Jayanta Kundu <jayantak007 at gmail.com> wrote:
Hi All,
I am using Xymon 4.2.3. Could anyone please let me know how can I write a sample script in Client side which should execute every 15 minutes on business hours(9:00 am to 6 pm) every day.
With Thanks & Regards, Jayanta.
On Sun, May 22, 2011 at 6:55 PM, Henrik Størner <henrik at hswn.dk> wrote:
I am using Xymon 4.2.3. I didn't found any file named "tasks.cfg" file in client side.
Then you'll have to run the script via your system 'cron' utility.
Regards, Henrik
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Hi,
To avoid the status goes from green/red to purple we can add "+2000" like some big positive value after $BB $BBDISP "status+2000 ........ in the client side custom script.
Where can i get the "$PATH_TO_BBCMD". In the "clientlaunch.cfg" file i configured as follows: [Test] ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg CMD $HOBBITCLIENTHOME/script/TEST/TEST.sh LOGFILE $HOBBITCLIENTHOME/logs/TEST/TEST.log INTERVAL 15m
In the cron job file named ("corn.txt") i configured as follows for testing purpose: 20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58 20,21 * *
- /home/xymon/client/start /home/xymon/client/script/TEST/TEST.sh
Every 2 minutes .log file should update. But here it is not updating. TEST.log file updating after every 15 minutes only.
Kindly help me for the same.
With Thanks & Regards, Jayanta.
On Mon, May 23, 2011 at 7:32 PM, Phil Meech <pmeech at gmail.com> wrote:
Oops, good point! I wrote that wondering how much it had to do with Xymon; perhaps had I considered it going purple I would have realised it was more to do with Xymon!
On 23 May 2011 15:26, Ralph Mitchell <ralphmitchell at gmail.com> wrote:
And at 18:30 every weekday that'll go purple... It would be better to add code to the top of the script to check the date/time and to send an automatic green (or perhaps blue) status whenever the date/time falls outside the times you want to watch. Ralph Mitchell
On Mon, May 23, 2011 at 10:13 AM, Phil Meech <pmeech at gmail.com> wrote:
Hi Jayanta,
Create a cron job as follows:
*/15 9-18 * * * $PATH_TO_BBCMD $PATH_TO_YOUR_SCRIPT
Optionally if business hours were only Monday to Friday the last asterix would be replaced by 1-5.
Phil
On 23 May 2011 15:02, Jayanta Kundu <jayantak007 at gmail.com> wrote:
Hi All,
I am using Xymon 4.2.3. Could anyone please let me know how can I write a sample script in Client side which should execute every 15 minutes on business hours(9:00 am to 6 pm) every day.
With Thanks & Regards, Jayanta.
On Sun, May 22, 2011 at 6:55 PM, Henrik Størner <henrik at hswn.dk> wrote:
I am using Xymon 4.2.3. I didn't found any file named "tasks.cfg" file in client side.
Then you'll have to run the script via your system 'cron' utility.
Regards, Henrik
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
There are not enough stars in that crontab entry. There are 5 fields total and you've only used the one with the minutes so there should be four more. Check man 5 crontab -- I always have to check which field is which.
Also, I don't know your platform or care to look it up, but there is normally a log associated with cron execution that probably would have alerted you to that problem. Might want to Google a bit.
On 05/23/2011 12:32 PM, Jayanta Kundu wrote:
Hi,
To avoid the status goes from green/red to purple we can add "+2000" like some big positive value after $BB $BBDISP "status+2000 ........ in the client side custom script.
Where can i get the "$PATH_TO_BBCMD". In the "clientlaunch.cfg" file i configured as follows: [Test] ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg CMD $HOBBITCLIENTHOME/script/TEST/TEST.sh LOGFILE $HOBBITCLIENTHOME/logs/TEST/TEST.log INTERVAL 15m
In the cron job file named ("corn.txt") i configured as follows for testing purpose: 20,22,24,26,28,30,32,34,36,38,40,42,44,46,48,50,52,54,56,58 20,21 * *
- /home/xymon/client/start /home/xymon/client/script/TEST/TEST.sh
Every 2 minutes .log file should update. But here it is not updating. TEST.log file updating after every 15 minutes only.
Kindly help me for the same.
With Thanks & Regards, Jayanta.
On Mon, May 23, 2011 at 7:32 PM, Phil Meech <pmeech at gmail.com> wrote:
Oops, good point! I wrote that wondering how much it had to do with Xymon; perhaps had I considered it going purple I would have realised it was more to do with Xymon!
On 23 May 2011 15:26, Ralph Mitchell <ralphmitchell at gmail.com> wrote:
And at 18:30 every weekday that'll go purple... It would be better to add code to the top of the script to check the date/time and to send an automatic green (or perhaps blue) status whenever the date/time falls outside the times you want to watch. Ralph Mitchell
On Mon, May 23, 2011 at 10:13 AM, Phil Meech <pmeech at gmail.com> wrote:
Hi Jayanta,
Create a cron job as follows:
*/15 9-18 * * * $PATH_TO_BBCMD $PATH_TO_YOUR_SCRIPT
Optionally if business hours were only Monday to Friday the last asterix would be replaced by 1-5.
Phil
On 23 May 2011 15:02, Jayanta Kundu <jayantak007 at gmail.com> wrote:
Hi All,
I am using Xymon 4.2.3. Could anyone please let me know how can I write a sample script in Client side which should execute every 15 minutes on business hours(9:00 am to 6 pm) every day.
With Thanks & Regards, Jayanta.
On Sun, May 22, 2011 at 6:55 PM, Henrik Størner <henrik at hswn.dk> wrote:
> I am using Xymon 4.2.3. > I didn't found any file named "tasks.cfg" file in client side.
Then you'll have to run the script via your system 'cron' utility.
Regards, Henrik
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
- ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |novosirj at umdnj.edu - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/CST-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk3a0zkACgkQmb+gadEcsb4cxQCeLuP+EpsVYAvtPVDYCq1uE1Vo 17IAn0OSENRu3hhaQCQpgsVzZykmnEs4 =BQU4 -----END PGP SIGNATURE-----
participants (5)
-
henrik＠hswn.dk
-
jayantak007＠gmail.com
-
novosirj＠umdnj.edu
-
pmeech＠gmail.com
-
ralphmitchell＠gmail.com