Issues with web menu display
I've upgraded a couple of my Xymon servers this week (to make sure I was seeing this issue on both) to 4.3.17. Both installed from RPMs I built, which have worked for many years. After this upgrade, I'm seeing some strangeness with the web menus. I dont' see this on the main Xymon page, but when I go to look at details of a test, I see the menu showing up like the attached picture. Both systems are 64bit CentOS 5.
I looked at the source and see some stray code:
/acknowledge.sh">Acknowledge alert</a><span class="invis"> | </span>
(and one or two other times).
I looked around and don't seem to see to be able to find anywhere in a text file that I could look to see if I could fix this. Can anyone give me a clue of where I should be looking to figure this out?
I've also attached the full html where you can see the stray lines.
Thanks! Skadz
Looks to be text from xymonmenu.cfg. Perhaps you have a bad character in your definition of $XYMONSERVERSECURECGIURL in xymonserver.cfg.
On 4 April 2014 07:40, Ryan Skadberg <skadz at skadz.com> wrote:
I've upgraded a couple of my Xymon servers this week (to make sure I was seeing this issue on both) to 4.3.17. Both installed from RPMs I built, which have worked for many years. After this upgrade, I'm seeing some strangeness with the web menus. I dont' see this on the main Xymon page, but when I go to look at details of a test, I see the menu showing up like the attached picture. Both systems are 64bit CentOS 5.
I looked at the source and see some stray code:
/acknowledge.sh">Acknowledge alert</a><span class="invis"> | </span>
(and one or two other times).
I looked around and don't seem to see to be able to find anywhere in a text file that I could look to see if I could fix this. Can anyone give me a clue of where I should be looking to figure this out?
I've also attached the full html where you can see the stray lines.
Thanks! Skadz
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
I thought about that and it just didn't make any sense that would be it.
I spent a bunch of time today and realized that I had done some 32/64 work (both RPMs were installed moved to just the 64bit one) and /usr/lib/xymon didn't exist anymore. Had to change a number of files to update /usr/lib/xymon to /usr/lib64/xymon (cgioptions.cfg was the guy actually causing this specific issue). Once I did that, everything started working right again.
Skadz
On Fri, Apr 4, 2014 at 10:38 AM, Jeremy Laidman <jlaidman at rebel-it.com.au> wrote:
Looks to be text from xymonmenu.cfg. Perhaps you have a bad character in your definition of $XYMONSERVERSECURECGIURL in xymonserver.cfg.
On 4 April 2014 07:40, Ryan Skadberg <skadz at skadz.com> wrote:
I've upgraded a couple of my Xymon servers this week (to make sure I was seeing this issue on both) to 4.3.17. Both installed from RPMs I built, which have worked for many years. After this upgrade, I'm seeing some strangeness with the web menus. I dont' see this on the main Xymon page, but when I go to look at details of a test, I see the menu showing up like the attached picture. Both systems are 64bit CentOS 5.
I looked at the source and see some stray code:
/acknowledge.sh">Acknowledge alert</a><span class="invis"> | </span>
(and one or two other times).
I looked around and don't seem to see to be able to find anywhere in a text file that I could look to see if I could fix this. Can anyone give me a clue of where I should be looking to figure this out?
I've also attached the full html where you can see the stray lines.
Thanks! Skadz
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
participants (2)
-
jlaidman＠rebel-it.com.au
-
skadz＠skadz.com