I am trying to get the bb-prtdiag.sh script to work on a couple of Solaris boxes and didn't know if I could get some help from someone in the forum that has it up and running. Currently I am trying to get it to run on a V880 and I am getting this error in the log file:
-bash-3.00$ more bb-prtdiag.log
awk: syntax error near line 1
awk: bailing out near line 1
and on the hobbit page I am seeing this:
UNAME command is not defined in etc/bbsys.local - using default: /sbin/uname
yellow PLATFORM_SPEC command is not defined in etc/bbsys.local - using default: SUNW,Sun-Fire-880
yellow PRTDIAG_COMMAND command is not defined in etc/bbsys.local - using default: /usr/platform/SUNW,Sun-Fire-880/sbin/prtdiag
yellow PRTDIAG_OPT command is not defined in etc/bbsys.local - using default: -v
yellow EXCLUDE_SYSTEMS command is not defined in etc/bbsys.local - using default: Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80 UltraAX-i2 UltraSPARC-IIi-cEngine Sun-Fire Netra-T4 UltraAX-e2 Ultra-Enterprise-10000
yellow PRTDIAG_IGNORE_ERRORS variable is not defined in etc/bbsys.local - using default: No failures|Most recent AC Power Failure|Minimum Available|CS Fail|No Hardware failures|^===|currently no Boards|Fault Fan
yellow PRTDIAG_IGNORE_FAULTS variable is not defined in etc/bbsys.local - using default: No Recent System Faults found|No System Faults found|Fault Value|Fault LED|NO_FAULT|Power Fault|Status Fault|Fault off
And I don't believe I have a program called "fjprtdiag" and it looks to be a necessary component.
Thanks,
Josh
Josh,
I believe there is a read me or maybe it's in the comments of the file but there are some entries that need to be added to I believe hobbitclient.cfg which are some of the bits that are saying not defined in etc/bbsys.local, I'm at home at the moment, but I'll take a look at our bb-prtdiag.sh script tommorow and see what we reset to get it working properly in hobbit.
regards,
Mike
From: Joshua Krause [mailto:forums at triadbiz.rr.com] Sent: Mon 07/01/2008 22:08 To: hobbit at hswn.dk Subject: [hobbit] bb-prtdiag.sh
I am trying to get the bb-prtdiag.sh script to work on a couple of Solaris boxes and didn't know if I could get some help from someone in the forum that has it up and running. Currently I am trying to get it to run on a V880 and I am getting this error in the log file:
-bash-3.00$ more bb-prtdiag.log
awk: syntax error near line 1
awk: bailing out near line 1
and on the hobbit page I am seeing this:
UNAME command is not defined in etc/bbsys.local - using default: /sbin/uname
yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif> PLATFORM_SPEC command is not defined in etc/bbsys.local - using default: SUNW,Sun-Fire-880
yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif> PRTDIAG_COMMAND command is not defined in etc/bbsys.local - using default: /usr/platform/SUNW,Sun-Fire-880/sbin/prtdiag
yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif> PRTDIAG_OPT command is not defined in etc/bbsys.local - using default: -v
yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif> EXCLUDE_SYSTEMS command is not defined in etc/bbsys.local - using default: Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80 UltraAX-i2 UltraSPARC-IIi-cEngine Sun-Fire Netra-T4 UltraAX-e2 Ultra-Enterprise-10000
yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif> PRTDIAG_IGNORE_ERRORS variable is not defined in etc/bbsys.local - using default: No failures|Most recent AC Power Failure|Minimum Available|CS Fail|No Hardware failures|^===|currently no Boards|Fault Fan
yellow<https://lo-mail.rightmove.com/exchange/mike.rawell/Drafts/RE:%20[hobbit]%20bb-prtdiag.sh.EML/1_multipart/image001.gif> PRTDIAG_IGNORE_FAULTS variable is not defined in etc/bbsys.local - using default: No Recent System Faults found|No System Faults found|Fault Value|Fault LED|NO_FAULT|Power Fault|Status Fault|Fault off
And I don't believe I have a program called "fjprtdiag" and it looks to be a necessary component.
Thanks,
Josh
This email has been scanned for all viruses by the MessageLabs service.
This email has been scanned for all viruses by the MessageLabs service.
Hi all
Is The Shire broken?
From SourceForge, I click on home page. It takes me to the redirection page, which redirects me to trantor.org, and then Error Code 10061: Connection refused.
Is anybody else experiencing this?
Regards Vernon
NOTICE: This email and any attachments are confidential. They may contain legally privileged information or copyright material. You must not read, copy, use or disclose them without authorisation. If you are not an intended recipient, please contact us at once by return email and then delete both messages and all attachments.
Yep.
martinOn Tue, 8 Jan 2008, Everett, Vernon wrote:
Hi all
Is The Shire broken?
From SourceForge, I click on home page. It takes me to the redirection page, which redirects me to trantor.org, and then Error Code 10061: Connection refused.
Is anybody else experiencing this?
Regards Vernon
NOTICE: This email and any attachments are confidential. They may contain legally privileged information or copyright material. You must not read, copy, use or disclose them without authorisation. If you are not an intended recipient, please contact us at once by return email and then delete both messages and all attachments.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Still up for me...
-----Original Message----- From: Martin Flemming [mailto:martin.flemming at desy.de] Sent: Tuesday, January 08, 2008 2:26 AM To: hobbit at hswn.dk Subject: Re: [hobbit] The Shire broken?
Yep.
martinOn Tue, 8 Jan 2008, Everett, Vernon wrote:
Hi all
Is The Shire broken?
From SourceForge, I click on home page. It takes me to the redirection page, which redirects me to trantor.org, and then Error Code 10061: Connection refused.
Is anybody else experiencing this?
Regards Vernon
NOTICE: This email and any attachments are confidential. They may contain legally privileged information or copyright material. You must not read, copy, use or disclose them without authorisation. If you are not an intended recipient, please contact us at once by return email and then delete both messages and all attachments.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Of course ..
sorry, mostly my mails arriving very latley and time-shifted ... :-(
From: Martin Flemming [mailto:martin.flemming at desy.de] Sent: Tuesday, January 08, 2008 2:26 AM
-> this was that morning at 08:00 o'clock
Date: Tue, 8 Jan 2008 16:34:24 -0500 From: Galen Johnson <Galen.Johnson at sas.com>
Cheers, martin
On Tue, 8 Jan 2008, Galen Johnson wrote:
Still up for me...
-----Original Message----- From: Martin Flemming [mailto:martin.flemming at desy.de] Sent: Tuesday, January 08, 2008 2:26 AM To: hobbit at hswn.dk Subject: Re: [hobbit] The Shire broken?
Yep.
martin
On Tue, 8 Jan 2008, Everett, Vernon wrote:
Hi all
Is The Shire broken?
From SourceForge, I click on home page. It takes me to the redirection page, which redirects me to trantor.org, and then Error Code 10061: Connection refused.
Is anybody else experiencing this?
Regards Vernon
NOTICE: This email and any attachments are confidential. They may contain legally privileged information or copyright material. You must not read, copy, use or disclose them without authorisation. If you are not an intended recipient, please contact us at once by return email and then delete both messages and all attachments.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Gruss
Martin FlemmingMartin Flemming DESY / IT office : Building 2b / 008a Notkestr. 85 phone : 040 - 8998 - 4667 22603 Hamburg mail : martin.flemming at desy.de
Hi Vernon,
I'm getting a "The page connet be displayed" error message.
Regards, Bert
-----Original Message----- From: Everett, Vernon [mailto:Vernon.Everett at woodside.com.au] Sent: dinsdag 8 januari 2008 2:21 To: hobbit at hswn.dk Subject: [hobbit] The Shire broken?
Hi all
Is The Shire broken?
From SourceForge, I click on home page. It takes me to the redirection page, which redirects me to trantor.org, and then Error Code 10061: Connection refused.
Is anybody else experiencing this?
Regards Vernon
NOTICE: This email and any attachments are confidential. They may contain legally privileged information or copyright material. You must not read, copy, use or disclose them without authorisation. If you are not an intended recipient, please contact us at once by return email and then delete both messages and all attachments.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Apparently, we had a power blip...the server was down...it's back up now.
=G=
-----Original Message----- From: Klomp, H. [mailto:klomph at nlr.nl] Sent: Tuesday, January 08, 2008 3:17 AM To: 'hobbit at hswn.dk' Subject: [hobbit] RE: The Shire broken?
Hi Vernon,
I'm getting a "The page connet be displayed" error message.
Regards, Bert
-----Original Message----- From: Everett, Vernon [mailto:Vernon.Everett at woodside.com.au] Sent: dinsdag 8 januari 2008 2:21 To: hobbit at hswn.dk Subject: [hobbit] The Shire broken?
Hi all
Is The Shire broken?
From SourceForge, I click on home page. It takes me to the redirection page, which redirects me to trantor.org, and then Error Code 10061: Connection refused.
Is anybody else experiencing this?
Regards Vernon
NOTICE: This email and any attachments are confidential. They may contain legally privileged information or copyright material. You must not read, copy, use or disclose them without authorisation. If you are not an intended recipient, please contact us at once by return email and then delete both messages and all attachments.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
http://theshire.sourceforge.net/ works but redirects to http://www.trantor.org/theshire/ which does work for me (11:30AM EST)
On 1/8/08, Klomp, H. <klomph at nlr.nl> wrote:
Hi Vernon,
I'm getting a "The page connet be displayed" error message.
Regards, Bert
-----Original Message----- From: Everett, Vernon [mailto:Vernon.Everett at woodside.com.au] Sent: dinsdag 8 januari 2008 2:21 To: hobbit at hswn.dk Subject: [hobbit] The Shire broken?
Hi all
Is The Shire broken?
From SourceForge, I click on home page. It takes me to the redirection page, which redirects me to trantor.org, and then Error Code 10061: Connection refused.
Is anybody else experiencing this?
Regards Vernon
NOTICE: This email and any attachments are confidential. They may contain legally privileged information or copyright material. You must not read, copy, use or disclose them without authorisation. If you are not an intended recipient, please contact us at once by return email and then delete both messages and all attachments.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hello, How can I use the bbwin under windows 98 SE? windows 98 have not any services wich bbwin use. I tryed to start it by using the bbwincmd, but I cannot see it is working or not. At the Hobbit server, the Win98 client will not be displayed.
Maik -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFHgtjCr4r+EhimPOURAm7aAJ9tzKl04xTTpcjTqz3rWNQ2FCNw/wCeN51t rYWtuTQeE8pYc8wFTNfUNWo= =mWHR -----END PGP SIGNATURE-----
Maik Heinelt a écrit :
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hello, How can I use the bbwin under windows 98 SE? windows 98 have not any services wich bbwin use. I tryed to start it by using the bbwincmd, but I cannot see it is working or not. At the Hobbit server, the Win98 client will not be displayed.
Hi
I'm afraid you won't be able to run it under Windows 9x :
Windows Vista Not yet officially supported
Windows Server 2003 Yes
Windows XP Yes
Windows 2000 Yes
Windows NT 4.0 Yes, with some restrictions. Somes features are not totally implemented.
Windows 95, 98, Me No support
--
Frédéric Mangeant
Steria EDC Sophia Antipolis
For the record the BBWin application is dependant on running through a service. DOS/Win9x doesn't support services so you're out of luck =(
Can I ask why you're running Win98 in 2008?
Josh
On 1/8/08, Frédéric Mangeant <frederic.mangeant at steria.com> wrote:
Maik Heinelt a écrit :
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hello, How can I use the bbwin under windows 98 SE? windows 98 have not any services wich bbwin use. I tryed to start it by using the bbwincmd, but I cannot see it is working or not. At the Hobbit server, the Win98 client will not be displayed.
Hi
I'm afraid you won't be able to run it under Windows 9x :
Windows Vista Not yet officially supported
Windows Server 2003 Yes
Windows XP Yes
Windows 2000 Yes
Windows NT 4.0 Yes, with some restrictions. Somes features are not totally implemented.
Windows 95, 98, Me No support
--
Frédéric Mangeant
Steria EDC Sophia Antipolis
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
On Tue, 8 Jan 2008, Josh Luthman wrote:
For the record the BBWin application is dependant on running through a service. DOS/Win9x doesn't support services so you're out of luck =(
Mr Big runs as a service or in a dos window and is (or was, we have nowhere to test that anymore) compatible with windows 98.
Ulric
participants (10)
-
forums＠triadbiz.rr.com
-
frederic.mangeant＠steria.com
-
Galen.Johnson＠sas.com
-
josh＠imaginenetworksllc.com
-
klomph＠nlr.nl
-
maik＠vegasystems.com
-
martin.flemming＠desy.de
-
Mike.Rowell＠Rightmove.co.uk
-
ulric＠siag.nu
-
Vernon.Everett＠woodside.com.au