Thanks. I got past that. Now how do I get it to run. I have run the make command. What’s next?
From: Scott Pfister [mailto:icepickjazz at gmail.com] Sent: Monday, November 24, 2014 4:28 PM To: Charles Lucas Subject: Re: [Xymon] FW: XYMON question
Charles,
See http://www.perzl.org/aix/index.php?n=Main.Make
It has precompiled gmake binaries for AIX 5.3 and above. Download the rpm and install on aix server and try again. On Nov 24, 2014 11:01 AM, "Charles Lucas" <Charles.Lucas at worldpay.us<mailto:Charles.Lucas at worldpay.us>> wrote: I have already installed GNU make. I’m not sure how to configure it though. I just untar’d it. Not sure what to do with GNU to get make to work:
I am trying to install xymon on my AIX 7.1 server. I am getting the following error:
pwd
/home/workspace/xymon/xymon-4.3.17
./configure
Configuration script for Xymon
This script asks a few questions and builds a Makefile to compile Xymon
Checking your make-utility GNU make is required to build Xymon. If it is available as "gmake", run configure as: 'MAKE=gmake ./configure.server'
./configure.client
Configuration script for Xymon client
This script asks a few questions and builds a Makefile to compile Xymon
Checking your make-utility GNU make is required to build Xymon. If it is available as "gmake", run configure as: 'MAKE=gmake ./configure.client'
Any ideas why its failing? I have installed gcc. I have not sure how to configure it. Is there a precompiled version out there or AIX filesets for xymon?
Thanks,
From: Henrik Størner [mailto:henrik at hswn.dk<mailto:henrik at hswn.dk>] Sent: Saturday, November 22, 2014 2:15 AM To: Charles Lucas Subject: Re: XYMON question
Hi Charles,
please use the Xymon mailinglist - the address for that is xymon at xymon.com<mailto:xymon at xymon.com>
Sounds like you need to install the GNU "make" utility.
Regards, Henrik
Den 20-11-2014 kl. 17:04 skrev Charles Lucas: Hi Henrik
I am trying to install xymon on my AIX 7.1 server. I am getting the following error:
pwd
/home/workspace/xymon/xymon-4.3.17
./configure
Configuration script for Xymon
This script asks a few questions and builds a Makefile to compile Xymon
Checking your make-utility GNU make is required to build Xymon. If it is available as "gmake", run configure as: 'MAKE=gmake ./configure.server'
./configure.client
Configuration script for Xymon client
This script asks a few questions and builds a Makefile to compile Xymon
Checking your make-utility GNU make is required to build Xymon. If it is available as "gmake", run configure as: 'MAKE=gmake ./configure.client'
Any ideas why its failing? I have installed gcc. I have not sure how to configure it. Is there a precompiled version out there or AIX filesets for xymon?
Thanks, Charles C. Lucas Sr. AIX Engineer, Infrastructure Technology T: 678-587-1722<tel:678-587-1722> | M: 803-479-0343<tel:803-479-0343> 600 Morgan Falls Road | Atlanta, GA 30350 | worldpay.com<http://www.worldpay.com/>
[cid:image001.png at 01CF5985.A5F87640]
Connect with us: [cid:image002.png at 01CF5985.A5F87640]<https://www.facebook.com/Worldpay.us> [cid:image003.png at 01CF5985.A5F87640] <http://www.youtube.com/worldpayus> [cid:image004.png at 01CF5985.A5F87640] <https://twitter.com/worldpay_US> [cid:image006.png at 01CF5985.A5F87640] <https://plus.google.com/+WorldpayUs/> [cid:image007.png at 01CF5985.A5F87640] <http://www.linkedin.com/company/worldpay->
CONFIDENTIAL COMMUNICATION NOTICE. The information contained in this email message is confidential and proprietary and is intended solely for the use of the addressee. Any unauthorized dissemination, distribution or copying of this email is expressly prohibited. If you have received this email message in error, please notify the sender immediately and delete this message and any attachments.
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
This may be a silly question, but have you read the install documentation? It's not clear where you're having trouble if you already built the software.
____ *Note: UMDNJ is now Rutgers-Biomedical and Health Sciences* || \\UTGERS |---------------------*O*--------------------- ||_// Biomedical | Ryan Novosielski - Senior Technologist || \\ and Health | novosirj at rutgers.edu<mailto:novosirj at rutgers.edu>- 973/972.0922 (2x0922) || \\ Sciences | OIRT/High Perf & Res Comp - MSB C630, Newark `'
On Dec 1, 2014, at 09:16, Charles Lucas <Charles.Lucas at WorldPay.us<mailto:Charles.Lucas at WorldPay.us>> wrote:
I have looked online for one. Can you send me the one that you used?
From: Novosielski, Ryan [mailto:novosirj at ca.rutgers.edu] Sent: Monday, December 01, 2014 9:40 AM To: Charles Lucas Cc: Scott Pfister; xymon at xymon.com Subject: Re: [Xymon] FW: XYMON question
This may be a silly question, but have you read the install documentation? It's not clear where you're having trouble if you already built the software.
____ *Note: UMDNJ is now Rutgers-Biomedical and Health Sciences* || \\UTGERS<file:///\\UTGERS> |---------------------*O*--------------------- ||_// Biomedical | Ryan Novosielski - Senior Technologist || \\ and Health | novosirj at rutgers.edu<mailto:novosirj at rutgers.edu>- 973/972.0922 (2x0922) || \\ Sciences | OIRT/High Perf & Res Comp - MSB C630, Newark `'
On Dec 1, 2014, at 09:16, Charles Lucas <Charles.Lucas at WorldPay.us<mailto:Charles.Lucas at WorldPay.us>> wrote:
Here is what I am getting:
gmake -s
gmake[1]: cc: Command not found Makefile:35: recipe for target 'test-endianness' failed gmake[1]: *** [test-endianness] Error 127 build/Makefile.rules:89: recipe for target 'lib-client' failed gmake: *** [lib-client] Error 2
From: Novosielski, Ryan [mailto:novosirj at ca.rutgers.edu] Sent: Monday, December 01, 2014 9:40 AM To: Charles Lucas Cc: Scott Pfister; xymon at xymon.com Subject: Re: [Xymon] FW: XYMON question
This may be a silly question, but have you read the install documentation? It's not clear where you're having trouble if you already built the software.
____ *Note: UMDNJ is now Rutgers-Biomedical and Health Sciences* || \\UTGERS<file:///\\UTGERS> |---------------------*O*--------------------- ||_// Biomedical | Ryan Novosielski - Senior Technologist || \\ and Health | novosirj at rutgers.edu<mailto:novosirj at rutgers.edu>- 973/972.0922 (2x0922) || \\ Sciences | OIRT/High Perf & Res Comp - MSB C630, Newark `'
On Dec 1, 2014, at 09:16, Charles Lucas <Charles.Lucas at WorldPay.us<mailto:Charles.Lucas at WorldPay.us>> wrote:
The install documentation in the docs directory.
Did you read the output of configure you ran before running gmake? It sort of looks like you don’t have a development environment on the machine (C compiler like gcc), or at least it’s not in your path.
I’m sure the platform was stated before, but that has been deleted from this email chain. So what is the platform?
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Charles Lucas Sent: Monday, December 01, 2014 9:01 AM To: Novosielski, Ryan Cc: xymon at xymon.com Subject: Re: [Xymon] FW: XYMON question
Here is what I am getting:
gmake -s
gmake[1]: cc: Command not found Makefile:35: recipe for target 'test-endianness' failed gmake[1]: *** [test-endianness] Error 127 build/Makefile.rules:89: recipe for target 'lib-client' failed gmake: *** [lib-client] Error 2
From: Novosielski, Ryan [mailto:novosirj at ca.rutgers.edu] Sent: Monday, December 01, 2014 9:40 AM To: Charles Lucas Cc: Scott Pfister; xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] FW: XYMON question
This may be a silly question, but have you read the install documentation? It's not clear where you're having trouble if you already built the software.
____ *Note: UMDNJ is now Rutgers-Biomedical and Health Sciences* || \\UTGERS<file:///\\UTGERS> |---------------------*O*--------------------- ||_// Biomedical | Ryan Novosielski - Senior Technologist || \\ and Health | novosirj at rutgers.edu<mailto:novosirj at rutgers.edu>- 973/972.0922 (2x0922) || \\ Sciences | OIRT/High Perf & Res Comp - MSB C630, Newark `'
On Dec 1, 2014, at 09:16, Charles Lucas <Charles.Lucas at WorldPay.us<mailto:Charles.Lucas at WorldPay.us>> wrote:
This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
Either the c compiler is not installed or not in your path. You need to install gcc compiler too: There is an rpm installalbe gcc already compiled for AIX. check out http://www.perzl.org/aix/index.php?n=Main.Gcc After you install the compiler remove the xymon makefile config and rerun your confirmation.
On Mon, Dec 1, 2014 at 10:01 AM, Charles Lucas <Charles.Lucas at worldpay.us> wrote:
Here is what I am getting:
gmake -s
gmake[1]: cc: Command not found
Makefile:35: recipe for target 'test-endianness' failed
gmake[1]: *** [test-endianness] Error 127
build/Makefile.rules:89: recipe for target 'lib-client' failed
gmake: *** [lib-client] Error 2
*From:* Novosielski, Ryan [mailto:novosirj at ca.rutgers.edu] *Sent:* Monday, December 01, 2014 9:40 AM *To:* Charles Lucas *Cc:* Scott Pfister; xymon at xymon.com *Subject:* Re: [Xymon] FW: XYMON question
This may be a silly question, but have you read the install documentation? It's not clear where you're having trouble if you already built the software.
____ *Note: UMDNJ is now Rutgers-Biomedical and Health Sciences* || \\UTGERS |---------------------*O*--------------------- ||_// Biomedical | Ryan Novosielski - Senior Technologist || \\ and Health | novosirj at rutgers.edu- 973/972.0922 (2x0922) || \\ Sciences | OIRT/High Perf & Res Comp - MSB C630, Newark `'
On Dec 1, 2014, at 09:16, Charles Lucas <Charles.Lucas at WorldPay.us> wrote:
participants (4)
-
Charles.Lucas＠WorldPay.us
-
icepickjazz＠gmail.com
-
novosirj＠ca.rutgers.edu
-
Paul.Root＠CenturyLink.com