Hi,
I am just getting started with the Xymon 4.2.3, and am very pleased with
that the trending and graphing I've been looking for comes pre-built ready
and working immediately after install.
I have a couple questions that I wouldn't mind to be answered though...
In the "conn" section of each host, the Y-Axis is in seconds, however the results seem odd as they are showing in milliseconds rather than microseconds. testing from the command line, the results are all under 500us. I opted to use hobbitping, but can move to fping if that may be the problem.
Thanks, Mario
I just started using fping about a month ago and it is much better
than hobbitping at reporting accurate RTT.
-Jason
On Mar 16, 2009, at 12:28 PM, mv652 at softhome.net wrote:
Hi, I am just getting started with the Xymon 4.2.3, and am very pleased
with that the trending and graphing I've been looking for comes pre- built ready and working immediately after install. I have a couple questions that I wouldn't mind to be answered
though... In the "conn" section of each host, the Y-Axis is in seconds,
however the results seem odd as they are showing in milliseconds
rather than microseconds. testing from the command line, the
results are all under 500us. I opted to use hobbitping, but can
move to fping if that may be the problem.Thanks, Mario
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Thanks,
Is there a procedure I should follow to move to fping away from hobbitping?
Thanks,
Jason Hand writes:
I just started using fping about a month ago and it is much better than hobbitping at reporting accurate RTT.
-Jason
On Mar 16, 2009, at 12:28 PM, mv652 at softhome.net wrote:
Hi, I am just getting started with the Xymon 4.2.3, and am very pleased with that the trending and graphing I've been looking for comes pre- built ready and working immediately after install. I have a couple questions that I wouldn't mind to be answered though... In the "conn" section of each host, the Y-Axis is in seconds, however the results seem odd as they are showing in milliseconds rather than microseconds. testing from the command line, the results are all under 500us. I opted to use hobbitping, but can move to fping if that may be the problem.
Thanks, Mario
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Recompile the server?
On 3/16/09, mv652 at softhome.net <mv652 at softhome.net> wrote:
Thanks,
Is there a procedure I should follow to move to fping away from hobbitping?
Thanks,
Jason Hand writes:
I just started using fping about a month ago and it is much better than hobbitping at reporting accurate RTT.
-Jason
On Mar 16, 2009, at 12:28 PM, mv652 at softhome.net wrote:
Hi, I am just getting started with the Xymon 4.2.3, and am very pleased with
that the trending and graphing I've been looking for comes pre- built ready and working immediately after install. I have a couple questions that I wouldn't mind to be answered though... In the "conn" section of each host, the Y-Axis is in seconds, however the results seem odd as they are showing in milliseconds rather than microseconds. testing from the command line, the results are all under 500us. I opted to use hobbitping, but can move to fping if that may be the problem.
Thanks, Mario
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
I was thinking anything besides that?
Thanks Mario
Josh Luthman writes:
Recompile the server?
On 3/16/09, mv652 at softhome.net <mv652 at softhome.net> wrote:
Thanks,
Is there a procedure I should follow to move to fping away from hobbitping?
Thanks,
Jason Hand writes:
I just started using fping about a month ago and it is much better than hobbitping at reporting accurate RTT.
-Jason
On Mar 16, 2009, at 12:28 PM, mv652 at softhome.net wrote:
Hi, I am just getting started with the Xymon 4.2.3, and am very pleased with
that the trending and graphing I've been looking for comes pre- built ready and working immediately after install. I have a couple questions that I wouldn't mind to be answered though... In the "conn" section of each host, the Y-Axis is in seconds, however the results seem odd as they are showing in milliseconds rather than microseconds. testing from the command line, the results are all under 500us. I opted to use hobbitping, but can move to fping if that may be the problem.
Thanks, Mario
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
See the man page for hobbitserver.cfg. The FPING environment variable specifies which program to use for ping. It defaults to hobbitping. Change that and restart the server. Ralph Mitchell
On Mon, Mar 16, 2009 at 4:21 PM, <mv652 at softhome.net> wrote:
I was thinking anything besides that? Thanks Mario Josh Luthman writes:
Recompile the server? On 3/16/09, mv652 at softhome.net <mv652 at softhome.net> wrote:
Thanks, Is there a procedure I should follow to move to fping away from hobbitping? Thanks, Jason Hand writes:
I just started using fping about a month ago and it is much better than hobbitping at reporting accurate RTT. -Jason
On Mar 16, 2009, at 12:28 PM, mv652 at softhome.net wrote:
Hi, I am just getting started with the Xymon 4.2.3, and am very pleased with that the trending and graphing I've been looking for comes pre- built ready and working immediately after install. I have a couple questions that I wouldn't mind to be answered though... In the "conn" section of each host, the Y-Axis is in seconds, however the results seem odd as they are showing in milliseconds rather than microseconds. testing from the command line, the results are all under 500us. I opted to use hobbitping, but can move to fping if that may be the problem. Thanks, Mario To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Great, thank you
Ralph Mitchell writes:
See the man page for hobbitserver.cfg. The FPING environment variable specifies which program to use for ping. It defaults to hobbitping. Change that and restart the server. Ralph Mitchell
On Mon, Mar 16, 2009 at 4:21 PM, <mv652 at softhome.net> wrote:
I was thinking anything besides that? Thanks Mario Josh Luthman writes:
Recompile the server? On 3/16/09, mv652 at softhome.net <mv652 at softhome.net> wrote:
Thanks, Is there a procedure I should follow to move to fping away from hobbitping? Thanks, Jason Hand writes:
I just started using fping about a month ago and it is much better than hobbitping at reporting accurate RTT. -Jason
On Mar 16, 2009, at 12:28 PM, mv652 at softhome.net wrote:
Hi, I am just getting started with the Xymon 4.2.3, and am very pleased with that the trending and graphing I've been looking for comes pre- built ready and working immediately after install. I have a couple questions that I wouldn't mind to be answered though... In the "conn" section of each host, the Y-Axis is in seconds, however the results seem odd as they are showing in milliseconds rather than microseconds. testing from the command line, the results are all under 500us. I opted to use hobbitping, but can move to fping if that may be the problem. Thanks, Mario To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
participants (4)
-
jason＠hands4christ.org
-
josh＠imaginenetworksllc.com
-
mv652＠softhome.net
-
ralphmitchell＠gmail.com