hello again i´ve been configuring the potrs procs etc monitors. but It doesn´t work. at hobbit-clients
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron #PROC /usr/sbin/cron 0 0 COLOR=red HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65
HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 #HOST=barcino.xx_dom.es
DISK /FIXED/D 97 100
HOST=barcino.xx_dom.es DISK * 97 100
HOST=sevilla.xx.es DISK /ora9dbf 95 100
HOST=lleida.xx.es DISK /prog 45 50
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80
and at client-local.cfg
#log:/usr/local/apache2/logs/error_log:10240 [santander.xx.es] log:/var/log/messages:10240 dir:/export/home/hobbit
IO cannot imagun what i swrong. Some idea? I have hobbit 4.2 clients and older clients , a mix. someone could send me an example of configuration? Please some help! i´ll be working on it . regards!
2009/1/29 Jose Mª Erquiaga <mosimodo at gmail.com>:
THANKS VERY MUCH!!! ill work on it right now regards
2009/1/28 Mogens Busk <mob at rcf.dk>:
You need to make configuration in /hobbit/server/etc/hobbit-client.cfg and /hobbit/server/etc/client-local.cfg
You can see how it is done in the demo site: http://www.hswn.dk/hobbit-cgi/viewconf.sh?clientlocal http://www.hswn.dk/hobbit-cgi/viewconf.sh?client
2009/1/28 Jose Mª Erquiaga <mosimodo at gmail.com>
Hi I cannot find how to configure that monitors im using hobbit , and the status of this monitors is clear. but if you click on them They show information , for example clicking in procs it shows all the process. but msg dont show anything but the message "
System logs at Wed Jan 28 10:13:06 CET 2009 : No log data available
The client did not report any logfile data "
the same with files .
Some idea???? regards!!!
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- mvh mogens busk mob at rcf.dk
hello again! i make it work but not in the hobbit 4.2 clients , they are still clear. some diference with the configuration using 4.2 clients for proc ports etc?? wresling!!
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again i´ve been configuring the potrs procs etc monitors. but It doesn´t work. at hobbit-clients
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron #PROC /usr/sbin/cron 0 0 COLOR=red HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65
HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 #HOST=barcino.xx_dom.es
DISK /FIXED/D 97 100
HOST=barcino.xx_dom.es DISK * 97 100
HOST=sevilla.xx.es DISK /ora9dbf 95 100
HOST=lleida.xx.es DISK /prog 45 50
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80
and at client-local.cfg
#log:/usr/local/apache2/logs/error_log:10240 [santander.xx.es] log:/var/log/messages:10240 dir:/export/home/hobbit
IO cannot imagun what i swrong. Some idea? I have hobbit 4.2 clients and older clients , a mix. someone could send me an example of configuration? Please some help! i´ll be working on it . regards!
2009/1/29 Jose Mª Erquiaga <mosimodo at gmail.com>:
THANKS VERY MUCH!!! ill work on it right now regards
2009/1/28 Mogens Busk <mob at rcf.dk>:
You need to make configuration in /hobbit/server/etc/hobbit-client.cfg and /hobbit/server/etc/client-local.cfg
You can see how it is done in the demo site: http://www.hswn.dk/hobbit-cgi/viewconf.sh?clientlocal http://www.hswn.dk/hobbit-cgi/viewconf.sh?client
2009/1/28 Jose Mª Erquiaga <mosimodo at gmail.com>
Hi I cannot find how to configure that monitors im using hobbit , and the status of this monitors is clear. but if you click on them They show information , for example clicking in procs it shows all the process. but msg dont show anything but the message "
System logs at Wed Jan 28 10:13:06 CET 2009 : No log data available
The client did not report any logfile data "
the same with files .
Some idea???? regards!!!
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- mvh mogens busk mob at rcf.dk
hi sorry.. i forgot some informmation I´ve make it work using the default
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT "LOCAL=%([.:]10042)" state=LISTEN TEXT=WEBMIN for one 4.2 client i try to check other proc HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron but it is clear and says No process checks defined ...............
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again! i make it work but not in the hobbit 4.2 clients , they are still clear. some diference with the configuration using 4.2 clients for proc ports etc?? wresling!!
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again i´ve been configuring the potrs procs etc monitors. but It doesn´t work. at hobbit-clients
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron #PROC /usr/sbin/cron 0 0 COLOR=red HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65
HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 #HOST=barcino.xx_dom.es
DISK /FIXED/D 97 100
HOST=barcino.xx_dom.es DISK * 97 100
HOST=sevilla.xx.es DISK /ora9dbf 95 100
HOST=lleida.xx.es DISK /prog 45 50
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80
and at client-local.cfg
#log:/usr/local/apache2/logs/error_log:10240 [santander.xx.es] log:/var/log/messages:10240 dir:/export/home/hobbit
IO cannot imagun what i swrong. Some idea? I have hobbit 4.2 clients and older clients , a mix. someone could send me an example of configuration? Please some help! i´ll be working on it . regards!
2009/1/29 Jose Mª Erquiaga <mosimodo at gmail.com>:
THANKS VERY MUCH!!! ill work on it right now regards
2009/1/28 Mogens Busk <mob at rcf.dk>:
You need to make configuration in /hobbit/server/etc/hobbit-client.cfg and /hobbit/server/etc/client-local.cfg
You can see how it is done in the demo site: http://www.hswn.dk/hobbit-cgi/viewconf.sh?clientlocal http://www.hswn.dk/hobbit-cgi/viewconf.sh?client
2009/1/28 Jose Mª Erquiaga <mosimodo at gmail.com>
Hi I cannot find how to configure that monitors im using hobbit , and the status of this monitors is clear. but if you click on them They show information , for example clicking in procs it shows all the process. but msg dont show anything but the message "
System logs at Wed Jan 28 10:13:06 CET 2009 : No log data available
The client did not report any logfile data "
the same with files .
Some idea???? regards!!!
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- mvh mogens busk mob at rcf.dk
it is important that you write the rules in revers order: individual rules first, global rules last in the config file.
have you checked the man page: http://www.hswn.dk/hobbit/help/manpages/
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>
hi sorry.. i forgot some informmation I´ve make it work using the default
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT "LOCAL=%([.:]10042)" state=LISTEN TEXT=WEBMIN for one 4.2 client i try to check other proc HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron but it is clear and says No process checks defined ...............
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again! i make it work but not in the hobbit 4.2 clients , they are still clear. some diference with the configuration using 4.2 clients for proc ports etc?? wresling!!
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again i´ve been configuring the potrs procs etc monitors. but It doesn´t work. at hobbit-clients
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron #PROC /usr/sbin/cron 0 0 COLOR=red HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65
HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 #HOST=barcino.xx_dom.es
DISK /FIXED/D 97 100
HOST=barcino.xx_dom.es DISK * 97 100
HOST=sevilla.xx.es DISK /ora9dbf 95 100
HOST=lleida.xx.es DISK /prog 45 50
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80
and at client-local.cfg
#log:/usr/local/apache2/logs/error_log:10240 [santander.xx.es] log:/var/log/messages:10240 dir:/export/home/hobbit
IO cannot imagun what i swrong. Some idea? I have hobbit 4.2 clients and older clients , a mix. someone could send me an example of configuration? Please some help! i´ll be working on it . regards!
2009/1/29 Jose Mª Erquiaga <mosimodo at gmail.com>:
THANKS VERY MUCH!!! ill work on it right now regards
2009/1/28 Mogens Busk <mob at rcf.dk>:
You need to make configuration in /hobbit/server/etc/hobbit-client.cfg and /hobbit/server/etc/client-local.cfg
You can see how it is done in the demo site: http://www.hswn.dk/hobbit-cgi/viewconf.sh?clientlocal http://www.hswn.dk/hobbit-cgi/viewconf.sh?client
2009/1/28 Jose Mª Erquiaga <mosimodo at gmail.com>
Hi I cannot find how to configure that monitors im using hobbit , and the status of this monitors is clear. but if you click on them They show information , for example clicking in procs it shows all the process. but msg dont show anything but the message "
System logs at Wed Jan 28 10:13:06 CET 2009 : No log data available
The client did not report any logfile data "
the same with files .
Some idea???? regards!!!
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- mvh mogens busk mob at rcf.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- mvh mogens busk mob at rcf.dk
hi thanks for the aswer but my hobbbit-client file is like this
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65 HOST=orense.xx.es PORT "LOCAL=%([.:]7230$)" STATE=% min=1 max=160 TRACK=eb "TEXT=EB" HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 PROC oracleORA10G HOST=barcino.xx_dom.es DISK * 97 100 HOST=sevilla.xx.es DISK /ora9dbf 95 100 HOST=lleida.xx.es DISK /prog 45 50 DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT LOCAL=%([.:]22$) STATE=LISTEN "TEXT=SSH listener" color="yellow"
seems to be something with the hobbit client 4.2. could it be? i need to configure some more ? in my older clients it works . but in all my hobbit 4.2 clients doesn´t work. on this 4.2 clients i´m running some ext scripts and it works correctly , so there´s nothing to do with ghosts clients. by the other hand ports proc msg and files era clear. they show information but says No files checked or no proc checked etc... i cant find nothing more. help please! good luck!!
2009/2/3 Mogens Busk <mob at rcf.dk>:
it is important that you write the rules in revers order: individual rules first, global rules last in the config file.
have you checked the man page: http://www.hswn.dk/hobbit/help/manpages/
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>
hi sorry.. i forgot some informmation I´ve make it work using the default
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT "LOCAL=%([.:]10042)" state=LISTEN TEXT=WEBMIN for one 4.2 client i try to check other proc HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron but it is clear and says No process checks defined ...............
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again! i make it work but not in the hobbit 4.2 clients , they are still clear. some diference with the configuration using 4.2 clients for proc ports etc?? wresling!!
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again i´ve been configuring the potrs procs etc monitors. but It doesn´t work. at hobbit-clients
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron #PROC /usr/sbin/cron 0 0 COLOR=red HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65
HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 #HOST=barcino.xx_dom.es
DISK /FIXED/D 97 100
HOST=barcino.xx_dom.es DISK * 97 100
HOST=sevilla.xx.es DISK /ora9dbf 95 100
HOST=lleida.xx.es DISK /prog 45 50
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80
and at client-local.cfg
#log:/usr/local/apache2/logs/error_log:10240 [santander.xx.es] log:/var/log/messages:10240 dir:/export/home/hobbit
IO cannot imagun what i swrong. Some idea? I have hobbit 4.2 clients and older clients , a mix. someone could send me an example of configuration? Please some help! i´ll be working on it . regards!
2009/1/29 Jose Mª Erquiaga <mosimodo at gmail.com>:
THANKS VERY MUCH!!! ill work on it right now regards
2009/1/28 Mogens Busk <mob at rcf.dk>:
You need to make configuration in /hobbit/server/etc/hobbit-client.cfg and /hobbit/server/etc/client-local.cfg
You can see how it is done in the demo site: http://www.hswn.dk/hobbit-cgi/viewconf.sh?clientlocal http://www.hswn.dk/hobbit-cgi/viewconf.sh?client
2009/1/28 Jose Mª Erquiaga <mosimodo at gmail.com> > > Hi > I cannot find how to configure that monitors > im using hobbit , and the status of this monitors is clear. > but if you click on them They show information , > for example clicking in procs it shows all the process. > but msg dont show anything but the message " > > System logs at Wed Jan 28 10:13:06 CET 2009 : No log data available > > The client did not report any logfile data > " > > the same with files . > > Some idea???? > regards!!! > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > >
-- mvh mogens busk mob at rcf.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- mvh mogens busk mob at rcf.dk
hi again i continue my travel .. santander.xx.es (as you see below) have two PROC defined plus the default one. But hobbit displays it with a clear color....(its a client4.2) i did some test debmonitor:/usr/lib/hobbit/server/bin# bbcmd hobbitd_client --test 2009-02-03 13:57:47 Using default environment file /usr/lib/hobbit/server/etc/hobbitserver.cfg 2009-02-03 13:57:47 Unknown token 'LOG' ignored at line 147 2009-02-03 13:57:47 Unknown token 'PORT' ignored at line 151 2009-02-03 13:57:47 pcre compile '*' failed (offset 0): nothing to repeat 2009-02-03 13:57:47 Unknown token 'PORT' ignored at line 174 Hostname (.=end, ?=dump, !=reload) []: santander.xx.es Test (cpu, mem, disk, proc): proc ps command string: Process %/usr/lib/autofs/automountd color red: Count=0, min=1, max=-1 Process cron color red: Count=0, min=1, max=-1 Process /usr/sbin/nsr/nsrexecd color red: Count=0, min=1, max=-1 Process cron color red: Count=0, min=1, max=-1
seems like eveything is allright. i cant imagine the problem ..... some idea?
2009/2/3 Jose Mª Erquiaga <mosimodo at gmail.com>:
hi thanks for the aswer but my hobbbit-client file is like this
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65 HOST=orense.xx.es PORT "LOCAL=%([.:]7230$)" STATE=% min=1 max=160 TRACK=eb "TEXT=EB" HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 PROC oracleORA10G HOST=barcino.xx_dom.es DISK * 97 100 HOST=sevilla.xx.es DISK /ora9dbf 95 100 HOST=lleida.xx.es DISK /prog 45 50 DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT LOCAL=%([.:]22$) STATE=LISTEN "TEXT=SSH listener" color="yellow"
seems to be something with the hobbit client 4.2. could it be? i need to configure some more ? in my older clients it works . but in all my hobbit 4.2 clients doesn´t work. on this 4.2 clients i´m running some ext scripts and it works correctly , so there´s nothing to do with ghosts clients. by the other hand ports proc msg and files era clear. they show information but says No files checked or no proc checked etc... i cant find nothing more. help please! good luck!!
2009/2/3 Mogens Busk <mob at rcf.dk>:
it is important that you write the rules in revers order: individual rules first, global rules last in the config file.
have you checked the man page: http://www.hswn.dk/hobbit/help/manpages/
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>
hi sorry.. i forgot some informmation I´ve make it work using the default
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT "LOCAL=%([.:]10042)" state=LISTEN TEXT=WEBMIN for one 4.2 client i try to check other proc HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron but it is clear and says No process checks defined ...............
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again! i make it work but not in the hobbit 4.2 clients , they are still clear. some diference with the configuration using 4.2 clients for proc ports etc?? wresling!!
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again i´ve been configuring the potrs procs etc monitors. but It doesn´t work. at hobbit-clients
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron #PROC /usr/sbin/cron 0 0 COLOR=red HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65
HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 #HOST=barcino.xx_dom.es
DISK /FIXED/D 97 100
HOST=barcino.xx_dom.es DISK * 97 100
HOST=sevilla.xx.es DISK /ora9dbf 95 100
HOST=lleida.xx.es DISK /prog 45 50
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80
and at client-local.cfg
#log:/usr/local/apache2/logs/error_log:10240 [santander.xx.es] log:/var/log/messages:10240 dir:/export/home/hobbit
IO cannot imagun what i swrong. Some idea? I have hobbit 4.2 clients and older clients , a mix. someone could send me an example of configuration? Please some help! i´ll be working on it . regards!
2009/1/29 Jose Mª Erquiaga <mosimodo at gmail.com>:
THANKS VERY MUCH!!! ill work on it right now regards
2009/1/28 Mogens Busk <mob at rcf.dk>: > You need to make configuration in > /hobbit/server/etc/hobbit-client.cfg and > /hobbit/server/etc/client-local.cfg > > You can see how it is done in the demo site: > http://www.hswn.dk/hobbit-cgi/viewconf.sh?clientlocal > http://www.hswn.dk/hobbit-cgi/viewconf.sh?client > > 2009/1/28 Jose Mª Erquiaga <mosimodo at gmail.com> >> >> Hi >> I cannot find how to configure that monitors >> im using hobbit , and the status of this monitors is clear. >> but if you click on them They show information , >> for example clicking in procs it shows all the process. >> but msg dont show anything but the message " >> >> System logs at Wed Jan 28 10:13:06 CET 2009 : No log data available >> >> The client did not report any logfile data >> " >> >> the same with files . >> >> Some idea???? >> regards!!! >> >> To unsubscribe from the hobbit list, send an e-mail to >> hobbit-unsubscribe at hswn.dk >> >> > > > > -- > mvh mogens busk > mob at rcf.dk >
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- mvh mogens busk mob at rcf.dk
finalii I found that is a problem with Sparc arquitecture client 4.2 works well with SF411 and SF4200 ( i86pc i386) but proc ports check don´t work well for sun4u (sparc ) architecture
......
2009/2/3 Jose Mª Erquiaga <mosimodo at gmail.com>:
hi again i continue my travel .. santander.xx.es (as you see below) have two PROC defined plus the default one. But hobbit displays it with a clear color....(its a client4.2) i did some test debmonitor:/usr/lib/hobbit/server/bin# bbcmd hobbitd_client --test 2009-02-03 13:57:47 Using default environment file /usr/lib/hobbit/server/etc/hobbitserver.cfg 2009-02-03 13:57:47 Unknown token 'LOG' ignored at line 147 2009-02-03 13:57:47 Unknown token 'PORT' ignored at line 151 2009-02-03 13:57:47 pcre compile '*' failed (offset 0): nothing to repeat 2009-02-03 13:57:47 Unknown token 'PORT' ignored at line 174 Hostname (.=end, ?=dump, !=reload) []: santander.xx.es Test (cpu, mem, disk, proc): proc ps command string: Process %/usr/lib/autofs/automountd color red: Count=0, min=1, max=-1 Process cron color red: Count=0, min=1, max=-1 Process /usr/sbin/nsr/nsrexecd color red: Count=0, min=1, max=-1 Process cron color red: Count=0, min=1, max=-1
seems like eveything is allright. i cant imagine the problem ..... some idea?
2009/2/3 Jose Mª Erquiaga <mosimodo at gmail.com>:
hi thanks for the aswer but my hobbbit-client file is like this
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65 HOST=orense.xx.es PORT "LOCAL=%([.:]7230$)" STATE=% min=1 max=160 TRACK=eb "TEXT=EB" HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 PROC oracleORA10G HOST=barcino.xx_dom.es DISK * 97 100 HOST=sevilla.xx.es DISK /ora9dbf 95 100 HOST=lleida.xx.es DISK /prog 45 50 DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT LOCAL=%([.:]22$) STATE=LISTEN "TEXT=SSH listener" color="yellow"
seems to be something with the hobbit client 4.2. could it be? i need to configure some more ? in my older clients it works . but in all my hobbit 4.2 clients doesn´t work. on this 4.2 clients i´m running some ext scripts and it works correctly , so there´s nothing to do with ghosts clients. by the other hand ports proc msg and files era clear. they show information but says No files checked or no proc checked etc... i cant find nothing more. help please! good luck!!
2009/2/3 Mogens Busk <mob at rcf.dk>:
it is important that you write the rules in revers order: individual rules first, global rules last in the config file.
have you checked the man page: http://www.hswn.dk/hobbit/help/manpages/
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>
hi sorry.. i forgot some informmation I´ve make it work using the default
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT "LOCAL=%([.:]10042)" state=LISTEN TEXT=WEBMIN for one 4.2 client i try to check other proc HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron but it is clear and says No process checks defined ...............
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again! i make it work but not in the hobbit 4.2 clients , they are still clear. some diference with the configuration using 4.2 clients for proc ports etc?? wresling!!
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again i´ve been configuring the potrs procs etc monitors. but It doesn´t work. at hobbit-clients
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron #PROC /usr/sbin/cron 0 0 COLOR=red HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65
HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 #HOST=barcino.xx_dom.es
DISK /FIXED/D 97 100
HOST=barcino.xx_dom.es DISK * 97 100
HOST=sevilla.xx.es DISK /ora9dbf 95 100
HOST=lleida.xx.es DISK /prog 45 50
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80
and at client-local.cfg
#log:/usr/local/apache2/logs/error_log:10240 [santander.xx.es] log:/var/log/messages:10240 dir:/export/home/hobbit
IO cannot imagun what i swrong. Some idea? I have hobbit 4.2 clients and older clients , a mix. someone could send me an example of configuration? Please some help! i´ll be working on it . regards!
2009/1/29 Jose Mª Erquiaga <mosimodo at gmail.com>: > THANKS VERY MUCH!!! > ill work on it right now > regards > > 2009/1/28 Mogens Busk <mob at rcf.dk>: >> You need to make configuration in >> /hobbit/server/etc/hobbit-client.cfg and >> /hobbit/server/etc/client-local.cfg >> >> You can see how it is done in the demo site: >> http://www.hswn.dk/hobbit-cgi/viewconf.sh?clientlocal >> http://www.hswn.dk/hobbit-cgi/viewconf.sh?client >> >> 2009/1/28 Jose Mª Erquiaga <mosimodo at gmail.com> >>> >>> Hi >>> I cannot find how to configure that monitors >>> im using hobbit , and the status of this monitors is clear. >>> but if you click on them They show information , >>> for example clicking in procs it shows all the process. >>> but msg dont show anything but the message " >>> >>> System logs at Wed Jan 28 10:13:06 CET 2009 : No log data available >>> >>> The client did not report any logfile data >>> " >>> >>> the same with files . >>> >>> Some idea???? >>> regards!!! >>> >>> To unsubscribe from the hobbit list, send an e-mail to >>> hobbit-unsubscribe at hswn.dk >>> >>> >> >> >> >> -- >> mvh mogens busk >> mob at rcf.dk >> >
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- mvh mogens busk mob at rcf.dk
Hmmm. All my Sun machines are SPARCs and the PROC checking works. You do realize that you must compile a client package for each of those architectures? You cannot compile one Sun package and then use it on both i386 and SPARC architectures...
Also, what are all those "unknown token" messages about?
GLH
-----Original Message----- From: Jose Mª Erquiaga [mailto:mosimodo at gmail.com] Sent: Wednesday, February 04, 2009 3:39 AM To: hobbit at hswn.dk Subject: Re: [hobbit] configure procs ports and files and msg
finalii I found that is a problem with Sparc arquitecture client 4.2 works well with SF411 and SF4200 ( i86pc i386) but proc ports check don´t work well for sun4u (sparc ) architecture
......
2009/2/3 Jose Mª Erquiaga <mosimodo at gmail.com>:
hi again i continue my travel .. santander.xx.es (as you see below) have two PROC defined plus the default one. But hobbit displays it with a clear color....(its a client4.2) i did some test debmonitor:/usr/lib/hobbit/server/bin# bbcmd hobbitd_client --test 2009-02-03 13:57:47 Using default environment file /usr/lib/hobbit/server/etc/hobbitserver.cfg 2009-02-03 13:57:47 Unknown token 'LOG' ignored at line 147 2009-02-03 13:57:47 Unknown token 'PORT' ignored at line 151 2009-02-03 13:57:47 pcre compile '*' failed (offset 0): nothing to repeat 2009-02-03 13:57:47 Unknown token 'PORT' ignored at line 174 Hostname (.=end, ?=dump, !=reload) []: santander.xx.es Test (cpu, mem, disk, proc): proc ps command string: Process %/usr/lib/autofs/automountd color red: Count=0, min=1, max=-1 Process cron color red: Count=0, min=1, max=-1 Process /usr/sbin/nsr/nsrexecd color red: Count=0, min=1, max=-1 Process cron color red: Count=0, min=1, max=-1
seems like eveything is allright. i cant imagine the problem ..... some idea?
2009/2/3 Jose Mª Erquiaga <mosimodo at gmail.com>:
hi thanks for the aswer but my hobbbit-client file is like this
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65 HOST=orense.xx.es PORT "LOCAL=%([.:]7230$)" STATE=% min=1 max=160 TRACK=eb "TEXT=EB" HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 PROC oracleORA10G HOST=barcino.xx_dom.es DISK * 97 100 HOST=sevilla.xx.es DISK /ora9dbf 95 100 HOST=lleida.xx.es DISK /prog 45 50 DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT LOCAL=%([.:]22$) STATE=LISTEN "TEXT=SSH listener" color="yellow"
seems to be something with the hobbit client 4.2. could it be? i need to configure some more ? in my older clients it works . but in all my hobbit 4.2 clients doesn´t work. on this 4.2 clients i´m running some ext scripts and it works correctly , so there´s nothing to do with ghosts clients. by the other hand ports proc msg and files era clear. they show information but says No files checked or no proc checked etc... i cant find nothing more. help please! good luck!!
2009/2/3 Mogens Busk <mob at rcf.dk>:
it is important that you write the rules in revers order: individual rules first, global rules last in the config file.
have you checked the man page: http://www.hswn.dk/hobbit/help/manpages/
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>
hi sorry.. i forgot some informmation I´ve make it work using the default
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT "LOCAL=%([.:]10042)" state=LISTEN TEXT=WEBMIN for one 4.2 client i try to check other proc HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron but it is clear and says No process checks defined ...............
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again! i make it work but not in the hobbit 4.2 clients , they are still clear. some diference with the configuration using 4.2 clients for proc ports etc?? wresling!!
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again i´ve been configuring the potrs procs etc monitors. but It doesn´t work. at hobbit-clients
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron #PROC /usr/sbin/cron 0 0 COLOR=red HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65
HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 #HOST=barcino.xx_dom.es
DISK /FIXED/D 97 100
HOST=barcino.xx_dom.es DISK * 97 100
HOST=sevilla.xx.es DISK /ora9dbf 95 100
HOST=lleida.xx.es DISK /prog 45 50
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80
and at client-local.cfg
#log:/usr/local/apache2/logs/error_log:10240 [santander.xx.es] log:/var/log/messages:10240 dir:/export/home/hobbit
IO cannot imagun what i swrong. Some idea? I have hobbit 4.2 clients and older clients , a mix. someone could send me an example of configuration? Please some help! i´ll be working on it . regards!
2009/1/29 Jose Mª Erquiaga <mosimodo at gmail.com>: > THANKS VERY MUCH!!! > ill work on it right now > regards > > 2009/1/28 Mogens Busk <mob at rcf.dk>: >> You need to make configuration in >> /hobbit/server/etc/hobbit-client.cfg and >> /hobbit/server/etc/client-local.cfg >> >> You can see how it is done in the demo site: >> http://www.hswn.dk/hobbit-cgi/viewconf.sh?clientlocal >> http://www.hswn.dk/hobbit-cgi/viewconf.sh?client >> >> 2009/1/28 Jose Mª Erquiaga <mosimodo at gmail.com> >>> >>> Hi >>> I cannot find how to configure that monitors im using hobbit >>> , and the status of this monitors is clear. >>> but if you click on them They show information , for example >>> clicking in procs it shows all the process. >>> but msg dont show anything but the message " >>> >>> System logs at Wed Jan 28 10:13:06 CET 2009 : No log data >>> available >>> >>> The client did not report any logfile data " >>> >>> the same with files . >>> >>> Some idea???? >>> regards!!! >>> >>> To unsubscribe from the hobbit list, send an e-mail to >>> hobbit-unsubscribe at hswn.dk >>> >>> >> >> >> >> -- >> mvh mogens busk >> mob at rcf.dk >> >
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- mvh mogens busk mob at rcf.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
hi! yes I did it, Ill try to install xymon in one of those hosts . see u soon : )
2009/2/4 Hubbard, Greg L <greg.hubbard at eds.com>:
Hmmm. All my Sun machines are SPARCs and the PROC checking works. You do realize that you must compile a client package for each of those architectures? You cannot compile one Sun package and then use it on both i386 and SPARC architectures...
Also, what are all those "unknown token" messages about?
GLH
-----Original Message----- From: Jose Mª Erquiaga [mailto:mosimodo at gmail.com] Sent: Wednesday, February 04, 2009 3:39 AM To: hobbit at hswn.dk Subject: Re: [hobbit] configure procs ports and files and msg
finalii I found that is a problem with Sparc arquitecture client 4.2 works well with SF411 and SF4200 ( i86pc i386) but proc ports check don´t work well for sun4u (sparc ) architecture
......
2009/2/3 Jose Mª Erquiaga <mosimodo at gmail.com>:
hi again i continue my travel .. santander.xx.es (as you see below) have two PROC defined plus the default one. But hobbit displays it with a clear color....(its a client4.2) i did some test debmonitor:/usr/lib/hobbit/server/bin# bbcmd hobbitd_client --test 2009-02-03 13:57:47 Using default environment file /usr/lib/hobbit/server/etc/hobbitserver.cfg 2009-02-03 13:57:47 Unknown token 'LOG' ignored at line 147 2009-02-03 13:57:47 Unknown token 'PORT' ignored at line 151 2009-02-03 13:57:47 pcre compile '*' failed (offset 0): nothing to repeat 2009-02-03 13:57:47 Unknown token 'PORT' ignored at line 174 Hostname (.=end, ?=dump, !=reload) []: santander.xx.es Test (cpu, mem, disk, proc): proc ps command string: Process %/usr/lib/autofs/automountd color red: Count=0, min=1, max=-1 Process cron color red: Count=0, min=1, max=-1 Process /usr/sbin/nsr/nsrexecd color red: Count=0, min=1, max=-1 Process cron color red: Count=0, min=1, max=-1
seems like eveything is allright. i cant imagine the problem ..... some idea?
2009/2/3 Jose Mª Erquiaga <mosimodo at gmail.com>:
hi thanks for the aswer but my hobbbit-client file is like this
HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron HOST=soria.xx.es LOG /usr/local/apache2/logs/error_log [error] COLOR=red HOST=radiasrv.xx_dom.es DISK /FIXED/C 60 65 HOST=orense.xx.es PORT "LOCAL=%([.:]7230$)" STATE=% min=1 max=160 TRACK=eb "TEXT=EB" HOST=cadiz.xx.es DISK /orarecovery 96 100 LOAD 8.0 14.0 PROC oracleORA10G HOST=barcino.xx_dom.es DISK * 97 100 HOST=sevilla.xx.es DISK /ora9dbf 95 100 HOST=lleida.xx.es DISK /prog 45 50 DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT LOCAL=%([.:]22$) STATE=LISTEN "TEXT=SSH listener" color="yellow"
seems to be something with the hobbit client 4.2. could it be? i need to configure some more ? in my older clients it works . but in all my hobbit 4.2 clients doesn´t work. on this 4.2 clients i´m running some ext scripts and it works correctly , so there´s nothing to do with ghosts clients. by the other hand ports proc msg and files era clear. they show information but says No files checked or no proc checked etc... i cant find nothing more. help please! good luck!!
2009/2/3 Mogens Busk <mob at rcf.dk>:
it is important that you write the rules in revers order: individual rules first, global rules last in the config file.
have you checked the man page: http://www.hswn.dk/hobbit/help/manpages/
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>
hi sorry.. i forgot some informmation I´ve make it work using the default
DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 PROC /usr/sbin/nsr/nsrexecd PORT "LOCAL=%([.:]10042)" state=LISTEN TEXT=WEBMIN for one 4.2 client i try to check other proc HOST=santander.xx.es PROC "%/usr/lib/autofs/automountd" 1 1 red PROC cron but it is clear and says No process checks defined ...............
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>:
hello again! i make it work but not in the hobbit 4.2 clients , they are still clear. some diference with the configuration using 4.2 clients for proc ports etc?? wresling!!
2009/2/2 Jose Mª Erquiaga <mosimodo at gmail.com>: > hello again > i´ve been configuring the potrs procs etc monitors. > but It doesn´t work. > at hobbit-clients > > HOST=santander.xx.es > PROC "%/usr/lib/autofs/automountd" 1 1 red > PROC cron > #PROC /usr/sbin/cron 0 0 COLOR=red HOST=soria.xx.es > LOG /usr/local/apache2/logs/error_log [error] COLOR=red > HOST=radiasrv.xx_dom.es > DISK /FIXED/C 60 65 > > HOST=cadiz.xx.es > DISK /orarecovery 96 100 > LOAD 8.0 14.0 > #HOST=barcino.xx_dom.es > # DISK /FIXED/D 97 100 > HOST=barcino.xx_dom.es > DISK * 97 100 > > HOST=sevilla.xx.es > DISK /ora9dbf 95 100 > > HOST=lleida.xx.es > DISK /prog 45 50 > > DEFAULT > # These are the built-in defaults. > UP 1h > LOAD 5.0 10.0 > DISK * 90 95 > MEMPHYS 100 101 > MEMSWAP 50 80 > > and at client-local.cfg > > #log:/usr/local/apache2/logs/error_log:10240 > [santander.xx.es] > log:/var/log/messages:10240 > dir:/export/home/hobbit > > IO cannot imagun what i swrong. > Some idea? > I have hobbit 4.2 clients and older clients , a mix. > someone could send me an example of configuration? > Please some help! > i´ll be working on it . > regards! > > > 2009/1/29 Jose Mª Erquiaga <mosimodo at gmail.com>: >> THANKS VERY MUCH!!! >> ill work on it right now >> regards >> >> 2009/1/28 Mogens Busk <mob at rcf.dk>: >>> You need to make configuration in >>> /hobbit/server/etc/hobbit-client.cfg and >>> /hobbit/server/etc/client-local.cfg >>> >>> You can see how it is done in the demo site: >>> http://www.hswn.dk/hobbit-cgi/viewconf.sh?clientlocal >>> http://www.hswn.dk/hobbit-cgi/viewconf.sh?client >>> >>> 2009/1/28 Jose Mª Erquiaga <mosimodo at gmail.com> >>>> >>>> Hi >>>> I cannot find how to configure that monitors im using hobbit >>>> , and the status of this monitors is clear. >>>> but if you click on them They show information , for example >>>> clicking in procs it shows all the process. >>>> but msg dont show anything but the message " >>>> >>>> System logs at Wed Jan 28 10:13:06 CET 2009 : No log data >>>> available >>>> >>>> The client did not report any logfile data " >>>> >>>> the same with files . >>>> >>>> Some idea???? >>>> regards!!! >>>> >>>> To unsubscribe from the hobbit list, send an e-mail to >>>> hobbit-unsubscribe at hswn.dk >>>> >>>> >>> >>> >>> >>> -- >>> mvh mogens busk >>> mob at rcf.dk >>> >> >
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- mvh mogens busk mob at rcf.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
participants (3)
-
greg.hubbard＠eds.com
-
mob＠rcf.dk
-
mosimodo＠gmail.com