Hi,
I was never able to get qpage-3.3 working on AIX, everything looked ok, compiled clean, etc,etc. It's been a long time, but if I remember correctly, it was similar to your problem. The fix for me was going from qpage-3.3, to qpage-3.2, and it worked fine then.
You can dl from the same place, just change it to qpage-3.2, ie:
http://www.qpage.org/download/qpage-3.2.tar.Z
Hope that helps,
Al
Al Jeffcoat IBM Certified Support Specialist, AIX Enterprise SAN and Storage Administrator System Programmer II
-----Original Message----- From: Andy France [mailto:Andy at zespri.com] Sent: Sunday, April 24, 2005 7:50 PM To: hobbit at hswn.dk Subject: [hobbit] OT: Anybody Here Use Qpage?
Hi All,
We have finally got around to getting a pager for after hours notification. Seems that email to SMS isn't that great when your SMTP gateway is the server in trouble :-)
I have downloaded and compiled qpage (http://www.qpage.org), and it seems to work OK - except it throws the following error:
bash-3.00# qpage -d -q 60 giving up root privileges becoming user 'daemon' /etc/qpage.cf(4): unexpected: <administrator = andy at zespri.com> /etc/qpage.cf(6): unexpected: <queuedir = /var/spool/qpage> /etc/qpage.cf(8): unexpected: <modem = zyxel> /etc/qpage.cf(9): unexpected: <device = /dev/cua/a> /etc/qpage.cf(10): unexpected: <initcmd = ATZ> /etc/qpage.cf(11): unexpected: <dialcmd = ATDT> /etc/qpage.cf(13): unexpected: <service = TelecomNZ> /etc/qpage.cf(14): unexpected: <device = zyxel> /etc/qpage.cf(15): unexpected: <phone = 0264001283> /etc/qpage.cf(16): unexpected: <msgprefix = false> /etc/qpage.cf(18): unexpected: <pager = support> /etc/qpage.cf(19): unexpected: <pagerid = 0262749494> /etc/qpage.cf(20): unexpected: <service = TelecomNZ> Error reading configuration file
So it seems it can read the config file OK, but just doesn't like the contents. I read the sample in the man page and can't see any issues.
I am running on Solaris 9 x86, and compiled qpage from source using gcc 3.4.3 (installed as a package from http://www.blastwave.org).
I have emailed the qpage author but have not had a response. Does anyone else here have experience with qpage? Especially getting the config to work!
TIA, Andy
#####################################################################################
This email is intended for the person to whom it is addressed only. If you are not the intended recipient, do not read, copy or use the contents in any way. The opinions expressed may not necessarily reflect those of ZESPRI Group of Companies ('ZESPRI').
While every effort has been made to verify the information contained herein, ZESPRI does not make any representations as to the accuracy of the information or to the performance of any data, information or the products mentioned herein. ZESPRI will not accept liability for any losses, damage or consequence, however, resulting directly or indirectly from the use of this e-mail/attachments. #####################################################################################
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited. This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandoregional.org . If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Regional Healthcare by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Regional Healthcare.
Hi Al,
Thanks for the info - sadly, for me qpage 3.2 does the same as 3.3 :-(
Cheers, Andy.
"Jeffcoat, Al" wrote on 26/04/2005 01:36:16:
Hi,
I was never able to get qpage-3.3 working on AIX, everything looked ok, compiled clean, etc,etc. It's been a long time, but if I remember correctly, it was similar to your problem. The fix for me was going from qpage-3.3, to qpage-3.2, and it worked fine then.
You can dl from the same place, just change it to qpage-3.2, ie:
Hope that helps,
Al
Al Jeffcoat IBM Certified Support Specialist, AIX Enterprise SAN and Storage Administrator System Programmer II
-----Original Message----- From: Andy France Sent: Sunday, April 24, 2005 7:50 PM To: hobbit at hswn.dk Subject: [hobbit] OT: Anybody Here Use Qpage?
Hi All,
We have finally got around to getting a pager for after hours notification. Seems that email to SMS isn't that great when your SMTP gateway is the server in trouble :-)
I have downloaded and compiled qpage (http://www.qpage.org), and it seems to work OK - except it throws the following error:
bash-3.00# qpage -d -q 60 giving up root privileges becoming user 'daemon' /etc/qpage.cf(4): unexpected: <administrator = andy at zespri.com> /etc/qpage.cf(6): unexpected: <queuedir = /var/spool/qpage> /etc/qpage.cf(8): unexpected: <modem = zyxel> /etc/qpage.cf(9): unexpected: <device = /dev/cua/a> /etc/qpage.cf(10): unexpected: <initcmd = ATZ> /etc/qpage.cf(11): unexpected: <dialcmd = ATDT> /etc/qpage.cf(13): unexpected: <service = TelecomNZ> /etc/qpage.cf(14): unexpected: <device = zyxel> /etc/qpage.cf(15): unexpected: <phone = 0264001283> /etc/qpage.cf(16): unexpected: <msgprefix = false> /etc/qpage.cf(18): unexpected: <pager = support> /etc/qpage.cf(19): unexpected: <pagerid = 0262749494> /etc/qpage.cf(20): unexpected: <service = TelecomNZ> Error reading configuration file
So it seems it can read the config file OK, but just doesn't like the contents. I read the sample in the man page and can't see any issues.
I am running on Solaris 9 x86, and compiled qpage from source using gcc 3.4.3 (installed as a package from http://www.blastwave.org).
I have emailed the qpage author but have not had a response. Does anyone else here have experience with qpage? Especially getting the config to work!
TIA, Andy
#####################################################################################
This email is intended for the person to whom it is addressed only. If you are not the intended recipient, do not read, copy or use the contents in any way. The opinions expressed may not necessarily reflect those of ZESPRI Group of Companies ('ZESPRI').
While every effort has been made to verify the information contained herein, ZESPRI does not make any representations as to the accuracy of the information or to the performance of any data, information or the products mentioned herein. ZESPRI will not accept liability for any losses, damage or consequence, however, resulting directly or indirectly from the use of this e-mail/attachments. #####################################################################################
participants (2)
-
ajeffco@orhs.org
-
Andy@zespri.com