Hi Al,
Thanks for the info - sadly, for me qpage 3.2 does the same as 3.3 :-(
Cheers, Andy.
"Jeffcoat, Al" wrote on 26/04/2005 01:36:16:
Hi,
I was never able to get qpage-3.3 working on AIX, everything looked ok, compiled clean, etc,etc. It's been a long time, but if I remember correctly, it was similar to your problem. The fix for me was going from qpage-3.3, to qpage-3.2, and it worked fine then.
You can dl from the same place, just change it to qpage-3.2, ie:
Hope that helps,
Al
Al Jeffcoat IBM Certified Support Specialist, AIX Enterprise SAN and Storage Administrator System Programmer II
-----Original Message----- From: Andy France Sent: Sunday, April 24, 2005 7:50 PM To: hobbit at hswn.dk Subject: [hobbit] OT: Anybody Here Use Qpage?
Hi All,
We have finally got around to getting a pager for after hours notification. Seems that email to SMS isn't that great when your SMTP gateway is the server in trouble :-)
I have downloaded and compiled qpage (http://www.qpage.org), and it seems to work OK - except it throws the following error:
bash-3.00# qpage -d -q 60 giving up root privileges becoming user 'daemon' /etc/qpage.cf(4): unexpected: <administrator = andy at zespri.com> /etc/qpage.cf(6): unexpected: <queuedir = /var/spool/qpage> /etc/qpage.cf(8): unexpected: <modem = zyxel> /etc/qpage.cf(9): unexpected: <device = /dev/cua/a> /etc/qpage.cf(10): unexpected: <initcmd = ATZ> /etc/qpage.cf(11): unexpected: <dialcmd = ATDT> /etc/qpage.cf(13): unexpected: <service = TelecomNZ> /etc/qpage.cf(14): unexpected: <device = zyxel> /etc/qpage.cf(15): unexpected: <phone = 0264001283> /etc/qpage.cf(16): unexpected: <msgprefix = false> /etc/qpage.cf(18): unexpected: <pager = support> /etc/qpage.cf(19): unexpected: <pagerid = 0262749494> /etc/qpage.cf(20): unexpected: <service = TelecomNZ> Error reading configuration file
So it seems it can read the config file OK, but just doesn't like the contents. I read the sample in the man page and can't see any issues.
I am running on Solaris 9 x86, and compiled qpage from source using gcc 3.4.3 (installed as a package from http://www.blastwave.org).
I have emailed the qpage author but have not had a response. Does anyone else here have experience with qpage? Especially getting the config to work!
TIA, Andy
#####################################################################################
This email is intended for the person to whom it is addressed only. If you are not the intended recipient, do not read, copy or use the contents in any way. The opinions expressed may not necessarily reflect those of ZESPRI Group of Companies ('ZESPRI').
While every effort has been made to verify the information contained herein, ZESPRI does not make any representations as to the accuracy of the information or to the performance of any data, information or the products mentioned herein. ZESPRI will not accept liability for any losses, damage or consequence, however, resulting directly or indirectly from the use of this e-mail/attachments. #####################################################################################