I know this is a trivial question, but I cannot find the Linux client code.
Server is Xymon-4.3.0-0.beta2 on CentOS 5.3.
I am running the Linux client on a test system currently.
I cannot find the link to the location of the software on any site.
Is there a different software for UNIX vs. Linux?
Is it just source or is it compiled?
I have the directories on the server but don't want to copy them over to another system.
I could not find any links under Help on the web page nor on Sourceforge
- must be looking for the wrong thing.
I know that the Windows client BBWin has its own site.
Thanks,
Tom Schmitt
Senior IT Staff - R&D
D.Tom.Schmitt at L-3Com.com
\\\\||////
\ ~ ~ /
| @ @ | --oOo---(_)---oOo--
Xymon is distributed as source code that you compile. Some of the Linux distributions have packages available to save you from the config/compile step, but usually these are older versions. The server requires a number of other things (fping, rrdtool, etc.), but the client needs are much simpler.
If your client system is a similar architecture to your server, you can copy the client directory to your client, though you will still need to integrate it with startup/shutdown, etc. Beware of what is in your log and tmp directories (under client) when you copy this stuff.
You can compile just the client by following the instructions in the documentation.
GLH
On Wed, Nov 4, 2009 at 4:10 PM, <d.tom.schmitt at l-3com.com> wrote:
I know this is a trivial question, but I cannot find the Linux client code.
Server is Xymon-4.3.0-0.beta2 on CentOS 5.3.
I am running the Linux client on a test system currently.
I cannot find the link to the location of the software on any site.
Is there a different software for UNIX vs. Linux?
Is it just source or is it compiled?
I have the directories on the server but don’t want to copy them over to another system.
I could not find any links under Help on the web page nor on Sourceforge – must be looking for the wrong thing.
I know that the Windows client BBWin has its own site.
*Thanks,*
*Tom Schmitt*
*Senior IT Staff - R&D*
*D.Tom.Schmitt at L-3Com.com*
**\\\\||////*\ ~ ~ / *****| @ @ | ****--oOo---(_)---oOo--***
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
Reference this:
http://en.wikibooks.org/wiki/System_Monitoring_with_Xymon/Administration_Gui...
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
"When you have eliminated the impossible, that which remains, however improbable, must be the truth." --- Sir Arthur Conan Doyle
On Wed, Nov 4, 2009 at 5:18 PM, Greg Hubbard <glh.forums at gmail.com> wrote:
Xymon is distributed as source code that you compile. Some of the Linux distributions have packages available to save you from the config/compile step, but usually these are older versions. The server requires a number of other things (fping, rrdtool, etc.), but the client needs are much simpler.
If your client system is a similar architecture to your server, you can copy the client directory to your client, though you will still need to integrate it with startup/shutdown, etc. Beware of what is in your log and tmp directories (under client) when you copy this stuff.
You can compile just the client by following the instructions in the documentation.
GLH
On Wed, Nov 4, 2009 at 4:10 PM, <d.tom.schmitt at l-3com.com> wrote:
I know this is a trivial question, but I cannot find the Linux client code.
Server is Xymon-4.3.0-0.beta2 on CentOS 5.3.
I am running the Linux client on a test system currently.
I cannot find the link to the location of the software on any site.
Is there a different software for UNIX vs. Linux?
Is it just source or is it compiled?
I have the directories on the server but don’t want to copy them over to another system.
I could not find any links under Help on the web page nor on Sourceforge – must be looking for the wrong thing.
I know that the Windows client BBWin has its own site.
*Thanks,*
*Tom Schmitt*
*Senior IT Staff - R&D*
*D.Tom.Schmitt at L-3Com.com*
**\\\\||////*\ ~ ~ / *****| @ @ | ****--oOo---(_)---oOo--***
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
Don't mean to be a pain.
Can you point me to the document(s) - that is what I am having problems finding. I did not find it in the wiki and I cannot tell from the listing at:
http://en.wikibooks.org/wiki/System_Monitoring_with_Xymon/Administration _Guide/Compiling_on_CentOS where the client code is - it just talks about building the server.
Where do I need to get just the client source from?
I am trying to get this information to the *NIX group for testing. I told him that he could copy over the files but that won't help for other flavors of *NIX.
Thanks,
Tom Schmitt
Senior IT Staff - R&D
L-3 Communication Systems West
640 North 2200 West
P.O. Box 16850
Salt Lake City, UT 84116
Phone (801) 594-3030
Cell (801) 231-7230
eFax (413) 480-6873
D.Tom.Schmitt at L-3Com.com
\\\\||////
\ ~ ~ /
| @ @ |
--oOo---(_)---oOo-------Original Message----- From: Greg Hubbard [mailto:glh.forums at gmail.com] Sent: Wednesday, November 04, 2009 3:18 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Location of the Linux / Unix client software
Xymon is distributed as source code that you compile. Some of the Linux distributions have packages available to save you from the config/compile step, but usually these are older versions. The server requires a number of other things (fping, rrdtool, etc.), but the client needs are much simpler.
If your client system is a similar architecture to your server, you can copy the client directory to your client, though you will still need to integrate it with startup/shutdown, etc. Beware of what is in your log and tmp directories (under client) when you copy this stuff.
You can compile just the client by following the instructions in the documentation.
GLH
On Wed, Nov 4, 2009 at 4:10 PM, <d.tom.schmitt at l-3com.com> wrote:
I know this is a trivial question, but I cannot find the Linux client code.
Server is Xymon-4.3.0-0.beta2 on CentOS 5.3.
I am running the Linux client on a test system currently.
I cannot find the link to the location of the software on any site.
Is there a different software for UNIX vs. Linux?
Is it just source or is it compiled?
I have the directories on the server but don't want to copy them over to another system.
I could not find any links under Help on the web page nor on Sourceforge - must be looking for the wrong thing.
I know that the Windows client BBWin has its own site.
*Thanks,*
*Tom Schmitt*
*Senior IT Staff - R&D*
*D.Tom.Schmitt at L-3Com.com*
**\\\\||////*\ ~ ~ / *****| @ @ | ****--oOo---(_)---oOo--***
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.424 / Virus Database: 270.14.49/2480 - Release Date: 11/04/09 19:51:00
The client and server are in the same archive. The source is on Sourceforge and the command to get it (4.2.3 at least) is in that wiki article I linked.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
"When you have eliminated the impossible, that which remains, however improbable, must be the truth." --- Sir Arthur Conan Doyle
On Wed, Nov 4, 2009 at 5:46 PM, <d.tom.schmitt at l-3com.com> wrote:
Don't mean to be a pain.
Can you point me to the document(s) - that is what I am having problems finding. I did not find it in the wiki and I cannot tell from the listing at:
http://en.wikibooks.org/wiki/System_Monitoring_with_Xymon/Administration _Guide/Compiling_on_CentOS<http://en.wikibooks.org/wiki/System_Monitoring_with_Xymon/Administration%0A_Guide/Compiling_on_CentOS> where the client code is - it just talks about building the server.
Where do I need to get just the client source from?
I am trying to get this information to the *NIX group for testing. I told him that he could copy over the files but that won't help for other flavors of *NIX.
Thanks, Tom Schmitt Senior IT Staff - R&D L-3 Communication Systems West 640 North 2200 West P.O. Box 16850 Salt Lake City, UT 84116 Phone (801) 594-3030 Cell (801) 231-7230 eFax (413) 480-6873 D.Tom.Schmitt at L-3Com.com \\\\||//// \ ~ ~ / | @ @ | --oOo---(_)---oOo-------Original Message----- From: Greg Hubbard [mailto:glh.forums at gmail.com] Sent: Wednesday, November 04, 2009 3:18 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Location of the Linux / Unix client software
Xymon is distributed as source code that you compile. Some of the Linux distributions have packages available to save you from the config/compile step, but usually these are older versions. The server requires a number of other things (fping, rrdtool, etc.), but the client needs are much simpler.
If your client system is a similar architecture to your server, you can copy the client directory to your client, though you will still need to integrate it with startup/shutdown, etc. Beware of what is in your log and tmp directories (under client) when you copy this stuff.
You can compile just the client by following the instructions in the documentation.
GLH
On Wed, Nov 4, 2009 at 4:10 PM, <d.tom.schmitt at l-3com.com> wrote:
I know this is a trivial question, but I cannot find the Linux client code.
Server is Xymon-4.3.0-0.beta2 on CentOS 5.3.
I am running the Linux client on a test system currently.
I cannot find the link to the location of the software on any site.
Is there a different software for UNIX vs. Linux?
Is it just source or is it compiled?
I have the directories on the server but don't want to copy them over to another system.
I could not find any links under Help on the web page nor on Sourceforge - must be looking for the wrong thing.
I know that the Windows client BBWin has its own site.
*Thanks,*
*Tom Schmitt*
*Senior IT Staff - R&D*
*D.Tom.Schmitt at L-3Com.com*
**\\\\||////*\ ~ ~ / *****| @ @ | ****--oOo---(_)---oOo--***
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.424 / Virus Database: 270.14.49/2480 - Release Date: 11/04/09 19:51:00
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Thanks to all!
I finally found the README.CLIENT FILE. It has been since February/March that I set it up. I need better notes! :-(
Thanks,
Tom Schmitt
Senior IT Staff - R&D
D.Tom.Schmitt at L-3Com.com
\\\\||////
\ ~ ~ /
| @ @ |
--oOo---(_)---oOo-------Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, November 04, 2009 4:03 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Location of the Linux / Unix client software
The client and server are in the same archive. The source is on Sourceforge and the command to get it (4.2.3 at least) is in that wiki article I linked.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
"When you have eliminated the impossible, that which remains, however improbable, must be the truth." --- Sir Arthur Conan Doyle
On Wed, Nov 4, 2009 at 5:46 PM, <d.tom.schmitt at l-3com.com> wrote:
Don't mean to be a pain.
Can you point me to the document(s) - that is what I am having problems finding. I did not find it in the wiki and I cannot tell from the listing at:
http://en.wikibooks.org/wiki/System_Monitoring_with_Xymon/Administration
_Guide/Compiling_on_CentOS<http://en.wikibooks.org/wiki/System_Monitorin g_with_Xymon/Administration%0A_Guide/Compiling_on_CentOS>
where the client code is - it just talks about building theserver.
Where do I need to get just the client source from?
I am trying to get this information to the *NIX group for testing. I told him that he could copy over the files but that won't help for other flavors of *NIX.
Thanks, Tom Schmitt Senior IT Staff - R&D L-3 Communication Systems West 640 North 2200 West P.O. Box 16850 Salt Lake City, UT 84116 Phone (801) 594-3030 Cell (801) 231-7230 eFax (413) 480-6873 D.Tom.Schmitt at L-3Com.com \\\\||//// \ ~ ~ / | @ @ | --oOo---(_)---oOo-------Original Message----- From: Greg Hubbard [mailto:glh.forums at gmail.com] Sent: Wednesday, November 04, 2009 3:18 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Location of the Linux / Unix client software
Xymon is distributed as source code that you compile. Some of the
Linux
distributions have packages available to save you from the config/compile step, but usually these are older versions. The server requires a number of other things (fping, rrdtool, etc.), but the client needs are much simpler.
If your client system is a similar architecture to your server, you can copy the client directory to your client, though you will still need to integrate it with startup/shutdown, etc. Beware of what is in your log and tmp directories (under client) when you copy this stuff.
You can compile just the client by following the instructions in the documentation.
GLH
On Wed, Nov 4, 2009 at 4:10 PM, <d.tom.schmitt at l-3com.com> wrote:
I know this is a trivial question, but I cannot find the Linux client code.
Server is Xymon-4.3.0-0.beta2 on CentOS 5.3.
I am running the Linux client on a test system currently.
I cannot find the link to the location of the software on any site.
Is there a different software for UNIX vs. Linux?
Is it just source or is it compiled?
I have the directories on the server but don't want to copy them over to another system.
I could not find any links under Help on the web page nor on Sourceforge - must be looking for the wrong thing.
I know that the Windows client BBWin has its own site.
*Thanks,*
*Tom Schmitt*
*Senior IT Staff - R&D*
*D.Tom.Schmitt at L-3Com.com*
**\\\\||////*\ ~ ~ / *****| @ @ | ****--oOo---(_)---oOo--***
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.424 / Virus Database: 270.14.49/2480 - Release Date: 11/04/09 19:51:00
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.424 / Virus Database: 270.14.49/2480 - Release Date: 11/04/09 19:51:00
participants (3)
-
d.tom.schmitt＠L-3com.com
-
glh.forums＠gmail.com
-
josh＠imaginenetworksllc.com