#1 After a bit more investigation, it turns out that it IS picking up the RAID info the 2850s. However as these have a SCSI card in them with nothing connected, its marking them as red. How do I get the script to ignore the SCSI card? Controller 1 is being listed as: LSI Logic PCI-X Ultra320 SCSI Host Adapter
#2 Whats weird is when I run "omreport chassis" on the balde and the 2850s I get the same output. However it seems the blades are only sending half the data.
PE2850: [root at ccvob01_pr ~]# omreport chassis Health
Main System Chassis
SEVERITY : COMPONENT Ok : Fans Ok : Intrusion Ok : Memory Ok : Power Supplies Ok : Processors Ok : Temperatures Ok : Voltages Ok : Hardware Log
For further help, type the command followed by -?
PE1855: [root at ccregdub_pr ~]# omreport chassis Health
Main System Chassis <----Hobbit gets cut off here SEVERITY : COMPONENT Ok : Memory Ok : Power Supplies Ok : Processors Ok : Temperatures Ok : Voltages Ok : Hardware Log
For further help, type the command followed by -?
-----Original Message----- From: Thomas Séglard [mailto:tsg at bluekiwi-software.com] Sent: 26 November 2008 09:48 To: hobbit at hswn.dk Cc: Brian O'Mahony Subject: Re: [hobbit] Dell OpenMage & hobbit
Hi,
I rewrote a little these scripts to match my setup. Actually, I got a lot of Dell PE 1850/1950/2950 and so on... In addition, I rewrote another script to grab informations from the BMC. Please, find below the output :
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
green Fans : Ok : omreport chassis fans green Intrusion : Ok : omreport chassis intrusion green Memory : Ok : omreport chassis memory green Processors : Ok : omreport chassis processors green Temperatures : Ok : omreport chassis temps green Voltages : Ok : omreport chassis volts green Hardware Log : Ok : none green Batteries : Ok : omreport chassis batteries
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
green All Server Components Functional !
No need for snmp, only 'sudo' ! Obviously, the OMSA package has to be installed on your monitored servers. Sincerly,
ThomaS
Buchan Milne a écrit :
On Tuesday 25 November 2008 18:10:37 Brian O'Mahony wrote:
Im running two scripts from deadcat.net -- bb-omsa-raid.sh and openmanage.sh.
Decided to implement these on a number of servers, and im seeing a few issues:
On PE2850s the openmanage script is showing all the information. However the Raid monitor lists the disks and the controllers but reports "no Controllers Found"
On PE1850 the openmanage script only picks up "Health" I assume this is picking up the CHASSIS health rather than mainsystem health? Is there a version for blades or do I go edit the script?
Have you tried devmon with the dell-poweredge template?
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. If you are not the intended addressee please contact the sender and dispose of this e-mail. Thank you.