April 2006 - Xymon - Xymon mailman web

Stopping hobbit creates coredump
by lars.ebeling＠leopg9.no-ip.org 03 Apr '06

03 Apr '06

Hi, stopping hobbit creates coredump. If I start and stop hobbit immediately, no corefile is created. But when hobbit is stopped after some hours the core is created. It has been like this for some time. $ gdb ./bin/hobbitd_channel ./core GNU gdb 5.3 Copyright 2002 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "hppa2.0n-hp-hpux11.00"... Core was generated by éhobbitd_channe'. Program terminated with signal 6, Aborted. warning: The shared libraries were not privately mapped; setting a breakpoint in a shared library will not work until you rerun the program. warning: Can't find file hobbitd_channel referenced in dld_list. Reading symbols from /usr/lib/libc.2...done. Reading symbols from /usr/lib/libdld.2...done. #0 0xc020bad0 in kill () from /usr/lib/libc.2 (gdb) bt #0 0xc020bad0 in kill () from /usr/lib/libc.2 #1 0xc01a655c in raise () from /usr/lib/libc.2 #2 0xc01e69a8 in abort_C () from /usr/lib/libc.2 #3 0xc01e6a04 in abort () from /usr/lib/libc.2 #4 0x00003b6c in main (argc=-2147483648, argv=0x400061dc) at hobbitd_channel.c:374 (gdb) q $ Regards Lars Ebeling http://leopg9.no-ip.org Hobbithobbyist "It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." -- Mark Twain

2 2

[hobbit] Viewing Custom Graphs
by EyalRi＠Clal-Ins.co.il 03 Apr '06

03 Apr '06

Hi, This is taken for my file using "rrdtool dump" (the output is longer) - any idea what is wrong ? <ds> <name> c0d0p1rps </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max>  <last_ds> UNKN </last_ds> <value> 0.0000000000e+00 </value> <unknown_sec> 0 </unknown_sec> </ds> <ds> <name> c0d0p1wps </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max>  <last_ds> UNKN </last_ds> <value> 0.0000000000e+00 </value> <unknown_sec> 0 </unknown_sec> </ds> <ds> <name> c0d0p2rps </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max>  <last_ds> UNKN </last_ds> <value> 0.0000000000e+00 </value> <unknown_sec> 0 </unknown_sec> </ds> <ds> <name> c0d0p2wps </name> <type> DERIVE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max>  <last_ds> 4 </last_ds> <value> 0.0000000000e+00 </value> <unknown_sec> 0 </unknown_sec> </ds> <ds> <name> c0d0p3rps </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max>  <last_ds> UNKN </last_ds> <value> 2.1700000000e+02 </value> <unknown_sec> 0 </unknown_sec> </ds> <ds> <name> c0d0p3wps </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max>  <last_ds> UNKN </last_ds> <value> 8.6800000000e+02 </value> <unknown_sec> 0 </unknown_sec> </ds> <ds> <name> c0d0p4rps </name> <type> DERIVE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max>  <last_ds> 0 </last_ds> <value> 0.0000000000e+00 </value> <unknown_sec> 0 </unknown_sec> </ds> Thanks, -----Original Message----- From: Gada, Subhash [mailto:subhash.gada at logicacmg.com] Sent: Monday, April 03, 2006 8:01 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Viewing Custom Graphs Hi, Check your rrd file (rrdtool dump foo.rrd | less) whether the DS name is same as in your hobbitgraph.cfg for [iostat]. -----Original Message----- From: EyalRi at Clal-Ins.co.il [mailto:EyalRi at Clal-Ins.co.il] Sent: Sunday, April 02, 2006 5:22 PM To: hobbit at hswn.dk Subject: RE: [hobbit] Viewing Custom Graphs Hi, I have added the following : [iostat] TITLE IoStat YAXIS Bytes/Second DEF:c0d0p1rps=iostat.rrd:c0d0p1rps:AVERAGE DEF:c0d0p1wps=iostat.rrd:c0d0p1wps:AVERAGE LINE1:c0d0p1rps#00FF00:read LINE2:c0d0p1wps#FF0000:write COMMENT:\n GPRINT:c0d0p1rps:LAST:In \: %5.1lf%s (cur) GPRINT:c0d0p1rps:MAX: \: %5.1lf%s (max) GPRINT:c0d0p1rps:MIN: \: %5.1lf%s (min) GPRINT:c0d0p1rps:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:c0d0p1wps:LAST:Out \: %5.1lf%s (cur) GPRINT:c0d0p1wps:MAX: \: %5.1lf%s (max) GPRINT:c0d0p1wps:MIN: \: %5.1lf%s (min) GPRINT:c0d0p1wps:AVERAGE: \: %5.1lf%s (avg)\n for the following data received: c0d0p1rps:0 c0d0p1wps:0 c0d0p2rps:0 c0d0p2wps:4 c0d0p3rps:1 c0d0p3wps:4 c0d0p4rps:0 c0d0p4wps:0 c0d0p5rps:0 c0d0p5wps:0 c0d0p6rps:0 c0d0p6wps:0 c0d0p7rps:0 c0d0p7wps:14 c0d0p8rps:0 c0d0p8wps:41 c0d0p9rps:0 c0d0p9wps:0 c0d0p10rps:0 c0d0p10wps:4 c0d0p11rps:1 c0d0p11wps:0 But it doesn't produce the graphs. I am getting quite deseparate about the custom graphs. -----Original Message----- From: Charles Jones [mailto:jonescr at cisco.com] Sent: Sunday, April 02, 2006 2:15 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Viewing Custom Graphs lars ebeling wrote: > You have to change the shared memory parameters. I don't know howe to > do that in Linux, /etc/sysctl.conf kernel.shmmax = value kernel.shmmni = value kernel.shmall = value kernel.sem = value Where value depends on how much memory you have, and what other processes need shared memory. Google for sysctl.conf and your flavor of linux and you should find what you need. -Charles To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk ------------------------------------------------------------------------ ----------------- This message was sent by Clal Insurance Ltd Mail Systems Visit us at http://www.clalbit.co.il ------------------------------------------------------------------------ ----------------- The information in this e-mail and any attachments is confidential and may be legally privileged. It is intended solely for the addressee or addressees. If you are not an intended recipient, please delete the message and any attachments and notify the sender of misdelivery: any use or disclosure of the contents of either is unauthorized and may be unlawful. To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you. To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

1 0

[hobbit] Viewing Custom Graphs
by subhash.gada＠logicacmg.com 03 Apr '06

03 Apr '06

Hi, Check your rrd file (rrdtool dump foo.rrd | less) whether the DS name is same as in your hobbitgraph.cfg for [iostat]. -----Original Message----- From: EyalRi at Clal-Ins.co.il [mailto:EyalRi at Clal-Ins.co.il] Sent: Sunday, April 02, 2006 5:22 PM To: hobbit at hswn.dk Subject: RE: [hobbit] Viewing Custom Graphs Hi, I have added the following : [iostat] TITLE IoStat YAXIS Bytes/Second DEF:c0d0p1rps=iostat.rrd:c0d0p1rps:AVERAGE DEF:c0d0p1wps=iostat.rrd:c0d0p1wps:AVERAGE LINE1:c0d0p1rps#00FF00:read LINE2:c0d0p1wps#FF0000:write COMMENT:\n GPRINT:c0d0p1rps:LAST:In \: %5.1lf%s (cur) GPRINT:c0d0p1rps:MAX: \: %5.1lf%s (max) GPRINT:c0d0p1rps:MIN: \: %5.1lf%s (min) GPRINT:c0d0p1rps:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:c0d0p1wps:LAST:Out \: %5.1lf%s (cur) GPRINT:c0d0p1wps:MAX: \: %5.1lf%s (max) GPRINT:c0d0p1wps:MIN: \: %5.1lf%s (min) GPRINT:c0d0p1wps:AVERAGE: \: %5.1lf%s (avg)\n for the following data received: c0d0p1rps:0 c0d0p1wps:0 c0d0p2rps:0 c0d0p2wps:4 c0d0p3rps:1 c0d0p3wps:4 c0d0p4rps:0 c0d0p4wps:0 c0d0p5rps:0 c0d0p5wps:0 c0d0p6rps:0 c0d0p6wps:0 c0d0p7rps:0 c0d0p7wps:14 c0d0p8rps:0 c0d0p8wps:41 c0d0p9rps:0 c0d0p9wps:0 c0d0p10rps:0 c0d0p10wps:4 c0d0p11rps:1 c0d0p11wps:0 But it doesn't produce the graphs. I am getting quite deseparate about the custom graphs. -----Original Message----- From: Charles Jones [mailto:jonescr at cisco.com] Sent: Sunday, April 02, 2006 2:15 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Viewing Custom Graphs lars ebeling wrote: > You have to change the shared memory parameters. I don't know howe to > do that in Linux, /etc/sysctl.conf kernel.shmmax = value kernel.shmmni = value kernel.shmall = value kernel.sem = value Where value depends on how much memory you have, and what other processes need shared memory. Google for sysctl.conf and your flavor of linux and you should find what you need. -Charles To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk ------------------------------------------------------------------------ ----------------- This message was sent by Clal Insurance Ltd Mail Systems Visit us at http://www.clalbit.co.il ------------------------------------------------------------------------ ----------------- The information in this e-mail and any attachments is confidential and may be legally privileged. It is intended solely for the addressee or addressees. If you are not an intended recipient, please delete the message and any attachments and notify the sender of misdelivery: any use or disclosure of the contents of either is unauthorized and may be unlawful. To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you.

1 0

[hobbit] Viewing Custom Graphs
by EyalRi＠Clal-Ins.co.il 02 Apr '06

02 Apr '06

The OS is RHEL 3 update 5 -----Original Message----- From: lars ebeling [mailto:lars.ebeling at leopg9.no-ip.org] Sent: Sunday, April 02, 2006 12:55 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Viewing Custom Graphs What operating system are you using for the hobbitserver? Lars ----- Original Message ----- From: <EyalRi at Clal-Ins.co.il> To: <hobbit at hswn.dk> Sent: Sunday, April 02, 2006 11:08 AM Subject: RE: [hobbit] Viewing Custom Graphs Hi, I am getting the following messages in rrd-data.log 2006-03-26 14:55:31 Tried to down BOARDBUSY: Invalid argument 2006-03-30 15:47:37 Could not get shm of size 262144: No such file or directory 2006-03-30 15:47:37 Channel not available 2006-03-30 15:47:43 Could not get shm of size 262144: No such file or directory 2006-03-30 15:47:43 Channel not available 2006-03-30 15:47:48 Could not get shm of size 262144: No such file or directory 2006-03-30 15:47:48 Channel not available any idea what is the reason or how to check what is causing this ? -----Original Message----- From: Jeff Newman [mailto:jeffnewman75 at gmail.com] Sent: Thursday, March 30, 2006 5:51 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Viewing Custom Graphs You got it backwords. it's iostat="ncv" -Jeff On 3/30/06, EyalRi at clal-ins.co.il <EyalRi at clal-ins.co.il> wrote: > Hi, > > I finally managed to create the NCV_iostat - iostat.rrd file. > I can see that the new file iostat.rrd is being updated every few minutes. > > But the graphs doesn't appear on the iostat column or in the trends > column. > > I have tried to add iostat and ncv=iostat to TRENDS and GRAPHS under the > specific host in bb-hosts > > 192.168.1.115 server01 # GRAPHS:iostat,ncv=iostat > TRENDS:*,vmstat:vmstat|vmstat4|vmstat5,ram,mrtg,ncv=iostat,iostat > > What am I missing ? > Should there be an "iostat" record in hobbitgraph.cfg under etc ? > > Any help/suggestion would be appreciated. > > > Regards, > Eyal Rif > > ----------------------------------------------------------------------------------------- > This message was sent by Clal Insurance Ltd Mail Systems > > Visit us at http://www.clalbit.co.il > ----------------------------------------------------------------------------------------- > The information in this e-mail and any attachments is confidential and may > be > legally privileged. It is intended solely for the addressee or addressees. > If > you are not an intended recipient, please delete the message and any > attachments > and notify the sender of misdelivery: any use or disclosure of the > contents of > either is unauthorized and may be unlawful. > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

4 3

[hobbit] Viewing Custom Graphs
by EyalRi＠Clal-Ins.co.il 02 Apr '06

02 Apr '06

Hi, I have added the following : [iostat] TITLE IoStat YAXIS Bytes/Second DEF:c0d0p1rps=iostat.rrd:c0d0p1rps:AVERAGE DEF:c0d0p1wps=iostat.rrd:c0d0p1wps:AVERAGE LINE1:c0d0p1rps#00FF00:read LINE2:c0d0p1wps#FF0000:write COMMENT:\n GPRINT:c0d0p1rps:LAST:In \: %5.1lf%s (cur) GPRINT:c0d0p1rps:MAX: \: %5.1lf%s (max) GPRINT:c0d0p1rps:MIN: \: %5.1lf%s (min) GPRINT:c0d0p1rps:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:c0d0p1wps:LAST:Out \: %5.1lf%s (cur) GPRINT:c0d0p1wps:MAX: \: %5.1lf%s (max) GPRINT:c0d0p1wps:MIN: \: %5.1lf%s (min) GPRINT:c0d0p1wps:AVERAGE: \: %5.1lf%s (avg)\n for the following data received: c0d0p1rps:0 c0d0p1wps:0 c0d0p2rps:0 c0d0p2wps:4 c0d0p3rps:1 c0d0p3wps:4 c0d0p4rps:0 c0d0p4wps:0 c0d0p5rps:0 c0d0p5wps:0 c0d0p6rps:0 c0d0p6wps:0 c0d0p7rps:0 c0d0p7wps:14 c0d0p8rps:0 c0d0p8wps:41 c0d0p9rps:0 c0d0p9wps:0 c0d0p10rps:0 c0d0p10wps:4 c0d0p11rps:1 c0d0p11wps:0 But it doesn't produce the graphs. I am getting quite deseparate about the custom graphs. -----Original Message----- From: Charles Jones [mailto:jonescr at cisco.com] Sent: Sunday, April 02, 2006 2:15 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Viewing Custom Graphs lars ebeling wrote: > You have to change the shared memory parameters. I don't know howe to > do that in Linux, /etc/sysctl.conf kernel.shmmax = value kernel.shmmni = value kernel.shmall = value kernel.sem = value Where value depends on how much memory you have, and what other processes need shared memory. Google for sysctl.conf and your flavor of linux and you should find what you need. -Charles To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk ----------------------------------------------------------------------------------------- This message was sent by Clal Insurance Ltd Mail Systems Visit us at http://www.clalbit.co.il ----------------------------------------------------------------------------------------- The information in this e-mail and any attachments is confidential and may be legally privileged. It is intended solely for the addressee or addressees. If you are not an intended recipient, please delete the message and any attachments and notify the sender of misdelivery: any use or disclosure of the contents of either is unauthorized and may be unlawful.

1 0

[hobbit] Viewing Custom Graphs
by EyalRi＠Clal-Ins.co.il 02 Apr '06

02 Apr '06

Hi, I am getting the following messages in rrd-data.log 2006-03-26 14:55:31 Tried to down BOARDBUSY: Invalid argument 2006-03-30 15:47:37 Could not get shm of size 262144: No such file or directory 2006-03-30 15:47:37 Channel not available 2006-03-30 15:47:43 Could not get shm of size 262144: No such file or directory 2006-03-30 15:47:43 Channel not available 2006-03-30 15:47:48 Could not get shm of size 262144: No such file or directory 2006-03-30 15:47:48 Channel not available any idea what is the reason or how to check what is causing this ? -----Original Message----- From: Jeff Newman [mailto:jeffnewman75 at gmail.com] Sent: Thursday, March 30, 2006 5:51 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Viewing Custom Graphs You got it backwords. it's iostat="ncv" -Jeff On 3/30/06, EyalRi at clal-ins.co.il <EyalRi at clal-ins.co.il> wrote: > Hi, > > I finally managed to create the NCV_iostat - iostat.rrd file. > I can see that the new file iostat.rrd is being updated every few minutes. > > But the graphs doesn't appear on the iostat column or in the trends column. > > I have tried to add iostat and ncv=iostat to TRENDS and GRAPHS under the specific host in bb-hosts > > 192.168.1.115 server01 # GRAPHS:iostat,ncv=iostat TRENDS:*,vmstat:vmstat|vmstat4|vmstat5,ram,mrtg,ncv=iostat,iostat > > What am I missing ? > Should there be an "iostat" record in hobbitgraph.cfg under etc ? > > Any help/suggestion would be appreciated. > > > Regards, > Eyal Rif > > ----------------------------------------------------------------------------------------- > This message was sent by Clal Insurance Ltd Mail Systems > > Visit us at http://www.clalbit.co.il > ----------------------------------------------------------------------------------------- > The information in this e-mail and any attachments is confidential and may be > legally privileged. It is intended solely for the addressee or addressees. If > you are not an intended recipient, please delete the message and any attachments > and notify the sender of misdelivery: any use or disclosure of the contents of > either is unauthorized and may be unlawful. > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

2 1

[hobbit] Viewing Custom Graphs
by EyalRi＠Clal-Ins.co.il 02 Apr '06

02 Apr '06

Hi, It still doesn't work, do I need to add an "iostat" record to "hobbitgraph.cfg" ? -----Original Message----- From: Jeff Newman [mailto:jeffnewman75 at gmail.com] Sent: Thursday, March 30, 2006 5:51 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Viewing Custom Graphs You got it backwords. it's iostat="ncv" -Jeff On 3/30/06, EyalRi at clal-ins.co.il <EyalRi at clal-ins.co.il> wrote: > Hi, > > I finally managed to create the NCV_iostat - iostat.rrd file. > I can see that the new file iostat.rrd is being updated every few minutes. > > But the graphs doesn't appear on the iostat column or in the trends column. > > I have tried to add iostat and ncv=iostat to TRENDS and GRAPHS under the specific host in bb-hosts > > 192.168.1.115 server01 # GRAPHS:iostat,ncv=iostat TRENDS:*,vmstat:vmstat|vmstat4|vmstat5,ram,mrtg,ncv=iostat,iostat > > What am I missing ? > Should there be an "iostat" record in hobbitgraph.cfg under etc ? > > Any help/suggestion would be appreciated. > > > Regards, > Eyal Rif > > ----------------------------------------------------------------------------------------- > This message was sent by Clal Insurance Ltd Mail Systems > > Visit us at http://www.clalbit.co.il > ----------------------------------------------------------------------------------------- > The information in this e-mail and any attachments is confidential and may be > legally privileged. It is intended solely for the addressee or addressees. If > you are not an intended recipient, please delete the message and any attachments > and notify the sender of misdelivery: any use or disclosure of the contents of > either is unauthorized and may be unlawful. > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

2 1

find-host/bbhostgrep with page/subpage and includes
by Dominique.Frise＠unil.ch 01 Apr '06

01 Apr '06

Hi, --- bb-hosts --- title Common Services # page comServDNS DNS group-only conn|dns DNS 130.223.8.20 uldns1 # dhcp dns smtp ldap://uldns1/o=universite%20de%20lausanne,c=ch 130.223.4.5 uldns2 # dhcp dns smtp ldap://uldns2/o=universite%20de%20lausanne,c=ch # page acadServDir Directories group-only conn|ldap Academic Directories 130.223.8.20 uldns1 # noconn 130.223.4.5 uldns2 # noconn # page acadServMail Mail group-only conn|http|imaps|pop3s|smtp|sslcert|webmailn Academic Mail 130.223.8.20 uldns1 # noconn 130.223.4.5 uldns2 # noconn # page acadServOther Other group-only afp|conn|dhcp|ftp|lic|smb Academic Other 130.223.8.20 uldns1 # noconn 130.223.4.5 uldns2 # noconn # title <br>Systems # page acadSys Academic title Academic Systems include bb-hosts.acadSys ----------------------- --- bb-host.acadSys --- group-only bckp|cpu|disk|ifmx|info|memory|msgs|orcl|procs|svm|trends|vx Solaris 130.223.8.20 uldns1 # prefer noconn COMMENT:"Prim. DNS/DHCP/People LDAP/MailGateway" 130.223.4.5 uldns2 # prefer noconn COMMENT:"Sec. DNS/DHCP/People LDAP/MailGateway" ----------------------- With the simplified configuration above, when I look for "uldns1" with find-host I have following result: Hostname (DisplayName) Location (Group Name) uldns1 DNS Other Mail Directories uldns1 Other Mail Directories uldns1 Mail Directories uldns1 Directories Host uldns1 appears for times! The page/subpage on the info column is correct. Also bbhostgrep in custom script doesn't show what I would expect: [bb at iris etc]$ bbhostgrep dhcp When I put "dispinclude" instead of "include" in bb-hosts, I have: [bb at iris etc]$ bbhostgrep dhcp 130.223.8.20 uldns1 # dhcp 130.223.4.5 uldns2 # dhcp Am I missing something? Thanks for any tips (I am using snapshot of the 31 march) Dominique

3 3