November 2016 - Xymon - Xymon mailman web

Need help with upgrade from 4.3.17 to 4.3.20
by cleaver＠terabithia.org 17 Jul '18

17 Jul '18

Hmm. So far, the only way I've been able to reproduce this is by replacing the ScriptAlias directives with mere Alias's in the xymon.conf apache config. Has there been any change in the path you've used for the CGI directory since the previous version, or is there any chance that another Alias line is taking precedence over the ScriptAlias? Do you see anything in the apache access/error logs that indicates an error? -jc On Tue, May 19, 2015 10:37 am, Cortes, Manny wrote: > Having the same problem after installing 4.3.20 on both Ubuntu server > 14.04 and 15.04. > > Thanks, > > > Manuel A Cortes > > Systems Programmer III > > [IBM_Cert] > > IBM Certified System Administrator AIX 7 > > Information Services > > 321-841-6534 > > Orlandohealth.com > > Facebook.com/orlandohealth > > Youtube.com/orlandohealth > > @orlandohealth on twitter > > > > 1414 Kuhl Avenue.,MP136 > > Orlando, Florida 32806 > > From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Asif Iqbal > Sent: Tuesday, May 19, 2015 12:59 PM > To: J.C. Cleaver > Cc: xymon at xymon.com > Subject: Re: [Xymon] Need help with upgrade from 4.3.17 to 4.3.20 > > > > On Tue, May 19, 2015 at 12:40 PM, J.C. Cleaver > <cleaver at terabithia.org<mailto:cleaver at terabithia.org>> wrote: > Hmm. It seems like it's trying to pass along the binary rather than > actually execute it. Can you > > a) validate the permissions on the various .sh files inside the > /xymon-cgi/ directory. (Wondering if there's a case where make install > doesn't set permissions properly), and > > > /var/lib/xymon/cgi-bin$ ls -al > total 6560 > drwxr-xr-x 2 root root 4096 May 19 10:19 . > drwxr-xr-x 16 xymon xymon 4096 May 19 10:19 .. > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 acknowledgements.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 appfeed-critical.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 appfeed.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 certreport.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 columndoc.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 confreport-critical.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 confreport.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 criticalview.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 csvinfo.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 datepage.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 eventlog.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 findhost.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 ghostlist.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 historylog.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 history.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 hostgraphs.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 hostlist.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 nongreen.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 notifications.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 perfdata.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 reportlog.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 report.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 showgraph.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 snapshot.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 svcstatus.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 topchanges.sh > > > b) verify that the ScriptAlias or ExecCGI options are still present in > apache.conf. > > > grep xymon-cgi /etc/apache2/sites-enabled/xymon-apache.conf > # "/xymon" and "/xymon-cgi" URLs. > ScriptAlias /xymon-cgi/ "/var/lib/xymon/cgi-bin/" > RewriteRule ^/xymon-cgi/bb-hist.sh /xymon-cgi/history.sh [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-eventlog.sh /xymon-cgi/eventlog.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-rep.sh /xymon-cgi/report.sh [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-replog.sh /xymon-cgi/reportlog.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-snapshot.sh /xymon-cgi/snapshot.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-findhost.sh /xymon-cgi/findhost.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-csvinfo.sh /xymon-cgi/csvinfo.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbitcolumn.sh /xymon-cgi/columndoc.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-datepage.sh /xymon-cgi/datepage.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbitgraph.sh /xymon-cgi/showgraph.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-hostsvc.sh /xymon-cgi/svcstatus.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-histlog.sh /xymon-cgi/historylog.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-confreport.sh /xymon-cgi/confreport.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-confreport-critical.sh > /xymon-cgi/confreport-critical.sh [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-nkview.sh /xymon-cgi/criticalview.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-certreport.sh /xymon-cgi/certreport.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-nongreen.sh /xymon-cgi/nongreen.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-hostgraphs.sh /xymon-cgi/hostgraphs.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-ghosts.sh /xymon-cgi/ghostlist.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-notifylog.sh /xymon-cgi/notifications.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-hostlist.sh /xymon-cgi/hostlist.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-perfdata.sh /xymon-cgi/perfdata.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-topchanges.sh /xymon-cgi/topchanges.sh > [R=permanent,L] > > > HTH, > > -jc > > > On Tue, May 19, 2015 7:56 am, Asif Iqbal wrote: >> I am not sure what I need to after the upgrade for the columns to show >> data >> instead of >> something like this >> >> >> ELF ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½>ï¿½ ï¿½ï¿½ï¿½ >> @ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ Ã >> ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½8ï¿½ ï¿½@ï¿½%ï¿½"ï¿½ ï¿½ï¿½ï¿½ >> ï¿½ï¿½ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½Ã¸ >> ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½Ã¸ ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½ >> ï¿½ï¿½ï¿½8 ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½8 >> @ï¿½ï¿½ï¿½ï¿½ï¿½8 @ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ >> ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½ >> ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½Ã¤Ã¤ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½Ã¤Ã¤ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ >> >> I removed FollowSymLinks from xymon-apache.conf file under /xymon-cgi/ >> and /xymon-seccgi/ and restarted. >> >> I am using ubuntu >> >> -- >> Asif Iqbal >> PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu<http://pgp.mit.edu> >> A: Because it messes up the order in which people normally read text. >> Q: Why is top-posting such a bad thing? >> _______________________________________________ >> Xymon mailing list >> Xymon at xymon.com<mailto:Xymon at xymon.com> >> http://lists.xymon.com/mailman/listinfo/xymon >> > > > > > -- > Asif Iqbal > PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu<http://pgp.mit.edu> > A: Because it messes up the order in which people normally read text. > Q: Why is top-posting such a bad thing? > > ________________________________ > > This e-mail message and any attached files are confidential and are > intended solely for the use of the addressee(s) named above. If you are > not the intended recipient, any review, use, or distribution of this > e-mail message and any attached files is strictly prohibited. > > This communication may contain material protected by Federal privacy > regulations, attorney-client work product, or other privileges. If you > have received this confidential communication in error, please notify the > sender immediately by reply e-mail message and permanently delete the > original message. To reply to our email administrator directly, send an > email to: postmaster at orlandohealth.com . > > If this e-mail message concerns a contract matter, be advised that no > employee or agent is authorized to conclude any binding agreement on > behalf of Orlando Health by e-mail without express written confirmation by > an officer of the corporation. Any views or opinions presented in this > e-mail are solely those of the author and do not necessarily represent > those of Orlando Health. >

8 25

Recovery notifications not generated when test goes red->yellow->green?
by hobbit＠elyograg.org 13 Dec '17

13 Dec '17

It appears that if a test goes from the red state, to the yellow state, and then to the green state, no recovery notification is sent. If it goes directly from red to green, then we get a notification. Initial notifications are only sent on RED and PURPLE. We have recovery notifications configured for most tests. Xymon server is 4.3.21, built using makerpm.sh and installed with yum on CentOS 6. I do not know whether our previous version (4.3.14) behaved similarly. It was almost an accident that I discovered the problem at all. Is this expected behavior? If it is, can I change it? Thanks, Shawn

4 3

CLASS not working as expected
by steve＠opendium.com 07 Nov '17

07 Nov '17

Under Xymon 4.3.25, I'm trying to use the class attribute to group hosts together by what monitoring and alerting they need. So for each host I have a hosts.cfg line like: 192.0.2.1 somehost.example.com # CLASS:Foo trace ssh Then in analysis.cfg I have: CLASS=Foo PROC this PROC that And alerts.cfg has: CLASS=Foo SCRIPT=blah However, the tests in analysis.cfg are not being applied. If I replace CLASS=Foo with HOST=somehost.example.com they work as expected. Also, CLASS=linux seems to work, which implies that the CLASS: directive in the hosts.cfg is being ignored. As far as I can tell, the messages on xymon's "client" channel don't contain the class name that was specified in hosts.cfg, so xymond_client is using the class that the client sent instead. Other channels, such as "status" do include the class name that was specified in hosts.cfg. Am I misunderstanding how the class is supposed to be used, or is this a bug? -- - Steve Hill Technical Director Opendium Limited http://www.opendium.com Direct contacts: Instant messager: xmpp:steve at opendium.com Email: steve at opendium.com Phone: sip:steve at opendium.com Sales / enquiries contacts: Email: sales at opendium.com Phone: +44-1792-824568 / sip:sales at opendium.com Support contacts: Email: support at opendium.com Phone: +44-1792-825748 / sip:support at opendium.com

6 7

DNS failures causing "runtime longer than time limit"
by jlaidman＠rebel-it.com.au 11 Sep '17

11 Sep '17

Hi I'm running Xymon v4.3.10 on Linux, and I'm quite sure it's compiled with c-ares support. I have 12 new DNS servers that were added to Xymon about one month ago. All of my server entries in hosts.cfg have "testip". The tasks.cfg runs xymonet with "--dns-timeout=3". The hosts entries look like so: 10.10.10.1 dnshost1.example.com # testip dns=NS:example.com,SOA: example.com About a week ago, connectivity to all of these servers failed, and at the same time, the xymonnet run time jumped from less than 15 seconds to about 330 seconds, so about 315 seconds extra. The xymonnet page says 295 seconds is taken up by DNS tests. If the increase in time taken is about 315 and is entirely due to the 12 servers failing, then each failed server is adding about 26 seconds to the total run time. I don't think this should be happening like this. With two DNS checks per server, the DNS checks should be taking 6 seconds each to time-out, not 26. If I run xymonnet with "--timing --no-update" and specify only one hostname, I can view the results and the timing. This shows that the ping check gets reported after about 3 seconds, and then the DNS tests are executed and take 26 seconds total. My naiive assumption was that when a server failed a ping (and didn't have "noclear" defined in hosts.cfg) then the network checks would be skipped. On re-reading the man page for hosts.cfg, it dawned on me that a failed ping simply suppresses failed test /results/, but doesn't stop the tests from being run. So the real problem is that the "--dns-timeout=3" is not being taken into consideration by xymonnet. If I run xymonnet with "--debug" it tells me: 1900 2015-06-03 12:02:20 ares_search: tlookup='example.com', class=1, type=2 1900 2015-06-03 12:02:20 ares_search: tlookup='example.com', class=1, type=6 1900 2015-06-03 12:02:20 Processing 0 DNS lookups with ARES 1900 2015-06-03 12:02:46 Finished ARES queue after loop 423 This is peculiar. Why would it say "processing 0 DNS lookups" when there are two lookups to test? Could this be because xymonnet hasn't actually been built with ARES support and I didn't know it? Is there a good way to tell? If I add "--no-ares" I get the same results perhaps suggesting a lack of ARES support. On the other hand, if I add "timeout:3" and "attempts:1" into resolv.conf, I also get the same results. If I run "nm /path/to/xymonnet | grep gethostby" it returns "ares_gethostbyname". Just for fun, I compiled Xymon v4.3.21 and ran the xymonnet binary from there, with no change in behaviour. I also tried removing the "--dns-timeout" option so that it defaults to 30 seconds, but still no change - 26 seconds for two DNS tests. So, I'm not really sure what the problem is, but xymonnet certainly isn't behaving as I would expect. Cheers Jeremy

2 3

Automate Daily Report : CSV Output
by Brad.Radjoo＠mtn.com 07 Feb '17

07 Feb '17

G'Day, Is there a way to generate an availability report of the past 24 hours in csv format and set that to e-mail myself on a daily basis ? I notice that it uses the xymon-cgi/report.sh script Kind Regards, - - - - Bradley "This email is confidential. If you have received it in error, you are on notice of its status. Please notify us immediately by reply email and then delete this message from your system. Please do not copy it or use it for any purpose, or disclose its contents to any other person as to do so could be a breach of confidentiality. Thank you for your co-operation. " "The information contained in this message is intended solely for the individual to whom it is specifically and originally addressed. This message and its contents may contain confidential or privileged information from MTN Group. If you are not the intended recipient, you are hereby notified that any disclosure or distribution, is strictly prohibited. If you receive this email in error, please notify MTN Group immediately and delete it. MTN Group does not accept any liability or responsibility if action is taken in reliance on the contents of this information . Note that all personal emails are not authorized by MTN Group. "

2 4

no graph
by shresthanav17＠gmail.com 30 Nov '16

30 Nov '16

Hi there I have installed xymon 4.3.27 from tar file. Everything is working fine. however I cannot get any graphs. How do we get the graphs? thanks

2 1

client-local.cfg pattern matching
by EDSchminke＠Hormel.com 30 Nov '16

30 Nov '16

I think there is a problem with how xymon processes the client-local.cfg file when it comes to pattern matching. I have the following in my client-local.cfg: [host=%(elm|oak|oracle[0-9][dp])] Next time this file is checked, this shows up in the xymond.log: 2016-11-30 11:06:50.100740 pcre compile '(elm|oak|oracle[0-9' failed (offset 19): missing terminating ] for character class 2016-11-30 11:06:50.100829 Invalid host pattern in client-local.cfg: (elm| oak|oracle[0-9 It seems like whatever engine processes the client-local.cfg is doing a lazy pattern matching. Rather than taking everything up to the LAST closing bracket, it grabs up to the FIRST closing bracket. However this is designed to work, grabbing up to the first closing bracket seriously breaks PCRE matching. I think a change to this process is in order so that it grabs the LAST closing bracket. Especially, if a % is present, indicating the following is PCRE pattern. Thanks, Erik D. Schminke | Associate Systems Programmer Hormel Foods Corporation | One Hormel Place | Austin, MN 55912 Phone: (507) 434-6817 edschminke at hormel.com | www.hormelfoods.com

2 1

Looking for jmxstat_kit.zip or alternative to monitor Wildfly 10.
by barasch2＠kwi.com 30 Nov '16

30 Nov '16

Hi all, I am looking for jmxstat_kit.zip The Dropbox link https://dl.dropbox.com/u/92999992/jmxstat_kit.zip is broken. Does anybody know of an alternative location? I want to monitor Wildfly 10. Does anybody have a recommendation of how to do this with xymon. Bill

2 1

telnet test leaving port hung.
by KK1051＠att.com 29 Nov '16

29 Nov '16

Paul, thanks for responding. No it is not a script, it is the internal telnet test in Xymon. I do not use the telnet test much as not many thing use that now. But I only see this hang issue going to the cisco. I have tried to catch it, I was thinking as you that telnet is not disconnecting nicely. -Kevin From: Root, Paul T [mailto:Paul.Root at CenturyLink.com] Sent: Monday, November 28, 2016 11:50 AM To: KING, KEVIN <KK1051 at att.com>; xymon at xymon.com Subject: RE: telnet test leaving port hung. Sounds to me like the xymon server is disconnecting from the Cisco, and the Cisco is missing it. Is this an expect script doing the test? Perhaps you aren't disconnecting gracefully? From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of KING, KEVIN Sent: Monday, November 28, 2016 10:26 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: [Xymon] telnet test leaving port hung. Xymon folks, I am running Xymon 4.3.10 and I am seeing an issue with the telnet test going to a Cisco term server (router with async cards to serial device). Randomly the term server will hang and show a refuse connection. We the term server is checked the hung session came from the Xymon server. When I check the Xymon server netstat I do not show a connection to the term server. I get the term server port cleared and we are ok again. Anyone see this behavior? -Kevin This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.

2 1

False alert on disk
by neilsimmonds1808＠gmail.com 28 Nov '16

28 Nov '16

Hi all, I'm getting a strange false alert on one of our Xymon systems. We got an alert for disk and the webpage output looks like this, Fri Nov 25 13:18:56 2016 - Filesystems NOT ok red 99 (0 units free) has reached the PANIC level (524288 units) red GB (18446744073709551615 units free) has reached the PANIC level (524288 units) red N/A (18446744073709551615 units free) has reached the PANIC level (524288 units) Filesystem 1K-blocks Used Avail Capacity Total Size Free Space Type Mount Point B 681565624 605072264 76493360 88% 649.99 GB 72.95 GB FIXED N/A C 52420060 33935280 18484780 64% 49 99 GB] 17.63 GB FIXED N/A R 368049116 149745148 218303968 40% 351.00 GB 208.19 GB FIXED N/A S 613409860 511927280 101482580 83% 584.99 GB 96.7 GB F]XED N/A T 157284348 113570648 43713700 72% 150.00 GB 41.69 GB FIXE N/A Notice that some of the lines seem to have spurious line feeds, there is a square bracket that has appeared and we have some letters missing. When I clicked on the link for the client data this is what the disk section looks like. [disk] Filesystem 1K-blocks Used Avail Capacity Total Size Free Space Type Mount Point B 681565624 605072264 76493360 88% 649.99 GB 72.95 GB FIXED N/A C 52420060 33935280 18484780 64% 49.99 GB 17.63 GB FIXED N/A R 368049116 149745148 218303968 40% 351.00 GB 208.19 GB FIXED N/A S 613409860 511927280 101482580 83% 584.99 GB 96.78 GB FIXED N/A T 157284348 113570648 43713700 72% 150.00 GB 41.69 GB FIXED N/A As you can see, there doesn't appear to be anything wrong with this. The only difference that I am aware of with this is that on our system where we are not seeing this, we are running Xymon 4.3.4 on CentOS 5.6 and on the one where we are seeing the issue we are running Xymon 4.3.4 on CentOS 6.3 Has anyone ever seen this kind of behaviour? Thanks, Neil.

2 1