November 2011 - Xymon - Xymon mailman web

GROUPs and recovery alerts
by henrik＠hswn.dk 19 Jan '12

19 Jan '12

On 05-07-2011 11:58, Heather Keen wrote: > Anyway, I think this is a BUG. > > Xymon Version 4.3.3. > Configuration as follows: > > analysis.cfg: > HOST=myhost.mydomain.com GROUP=heather > PROC TESTtestTEST 1 > > alerts.cfg: > HOST=* > MAIL heather1 at mydomain.com RECOVERED > > GROUP=heather > MAIL heather2 at mydomain.com RECOVERED > > > When the alert is generated, both e-mail addresses get the notification. > But when the alert is cleared, only heather1 at mydomain.com > <mailto:heather1 at mydomain.com> gets the recovery message. > > I've tried lots of different configuration options, and the only > conclusion I can come to is that recovery messages to GROUPs do not > work. :( It's certainly not what you would expect - must agree with that. But solving it is not quite as easy as one would expect. The problem is that when the PROC triggers a red status, Xymon knows that the rule was one that included a "GROUP=heather" setting. But when the recovery happens, it is because none of the rules in analysis.cfg triggered. So Xymon does not know that the green status is a recovery from a rule that contained the GROUP setting. There is some state lost here. To solve this, the xymond_alert module will have to keep track of the active alerts, and which GROUP settings triggered them. When the recovery happens, it will then use that list of groups that received the alert as the basis for sending out the recovered-notices. It can be solved, of course. Just don't be disappointed when you see 4.3.4 being released later today without a fix for this problem. Regards, Henrik

2 2

Multiplicated Background-gif after update to 4.3.5
by hj.beckers＠kreis-steinfurt.de 12 Jan '12

12 Jan '12

After upgrading from 4.3.0b2 to 4.3.5 the background-gif on the service pages gets multiplicated across the page (see attached screenshot). The overview pages are ok. Any hints?

4 4

new apache performance graphs not working
by sholmes42＠mac.com 05 Dec '11

05 Dec '11

Xymon 4.2.3. I'm really puzzled. I have been asked to add the apache performance graphs to a handfull of servers. I used the suggestion found on the 'tips' page under Help in the Xymon menu. Specifically: 1.2.3.4 my.server.com # conn ssh http://1.2.3.4 apache=http://1.2.3.4/server-status?auto TRENDS:*,apache:apache|apache1|apache2|apache3 The puzzle is it works for the first one we did as a test. Then I copied the relevant bb-hosts configuration tags (http, apache, TRENDS) from that host to another two with changes to hostnames. The app admin made the necessary changes to the apache server. The server-status request works from a browser on both of the servers in question (running the browser on the Xymon server). There are apache.rrd files in the data/rrd directory, and the graphs appear on the trends page, but in there is no data being graphed. Nothing but NaN in the values at the bottom of the graph. I stopped Xymon and removed one of the apache.rrd files and restarted Xymon and have now waited a sufficient amount of time and still nothing is showing up in the graphs. What am I missing? I know I'm about 2 days behind on sleep, but this should just work, especially since it worked on the first one we did. Thanks, Steve Purdue University -- If they give you ruled paper, write the other way. -Juan Ramon Jimenez, poet, Nobel Prize in literature (1881-1958) Truth never damages a cause that is just. -Mohandas Karamchand Gandhi (1869-1948)

4 6

Solaris X86 xymon configure problems
by keelie_ryan＠yahoo.com 30 Nov '11

30 Nov '11

Hi Sailesh, I have run the configure & selected no to the OpenSSL I still get the same error. Thanks Keeloe Sent from my iPhone On 28 Nov 2011, at 12:23, "Sailesh" <sailesh.mohabeer at mns.intnet.mu> wrote: > Hi Keelie, > > Please do not select the OpenSSL while configuring the Xymon. Just select no and see if you can the same error. > > Regards, > Sailesh > > From: Keelie [mailto:keelie_ryan at yahoo.com] > Sent: Monday, November 28, 2011 4:21 PM > To: Sailesh > Cc: <xymon at xymon.com> > Subject: Re: [Xymon] Solaris X86 xymon configure problems > > Hi Sailesh, > > Thanks for your quick response. > I have ensured I have all the same packages as you have listed installed and I copy/pasted the path as you have suggested, I still get exactly the same error. > > I think my problem is more to do with the OpenSSL core dump during the configure stage rather than my env setup. > > Regards > Keelie > > Sent from my iPhone > > On 28 Nov 2011, at 10:44, "Sailesh" <sailesh.mohabeer at mns.intnet.mu> wrote: > > Hi Keelie, > > Please find the packages I have installed on Solaris 10 Sparc. > > bash-3.00# ls > apache-2.2.21-sol10-sparc-local libtool-2.4-sol10-sparc-local > db-4.7.25.NC-sol10-sparc-local make-3.82-sol10-sparc-local > expat-2.0.1-sol10-sparc-local openldap-2.4.24-sol10-sparc-local > fontconfig-2.8.0-sol10-sparc-local openldap-2.4.26-sol10-sparc-local > fping-2.4b2-sol10-sparc-local openssl-1.0.0e-sol10-sparc-local > freetype-2.4.2-sol10-sparc-local pango-1.18.2-sol10-sparc-local > ganglia-3.0.7-sol10-sparc-local pcre-8.20-sol10-sparc-local > gcc-3.4.6-sol10-sparc-local prngd-0.9.25-sol10-sparc-local > glib-2.25.13-sol10-sparc-local render-0.8-sol10-sparc-local > jpeg-8a-sol10-sparc-local renderproto-0.9.3-sol10-sparc-local > jpeg2ps-1.9-sol10-sparc-local rrdtool-1.2.19-sol10-sparc-local > jpeginfo-1.6.1-sol10-sparc-local sasl-2.1.25-sol10-sparc-local > libart_lgpl-2.3.19-sol10-sparc-local tar-1.26-sol10-sparc-local > libgcc-3.4.6-sol10-sparc-local unrar-3.68-sol10-sparc-local > libiconv-1.14-sol10-sparc-local xrender-0.8.3-sol10-sparc-local > libintl-3.4.0-sol10-sparc-local xymon-4.2.2.tar > libpng-1.2.44-sol10-sparc-local zlib-1.2.5-sol10-sparc-local > > You do not have to link all these libraries. Go on http://sunfreeware.com/indexsparc10.html to download all the packages you required. > > The most important thing is to put the path in the correct order. > PATH=/usr/bin:/usr/sbin:/usr/local/bin:/usr/X11/bin:/usr/openwin/bin:/usr/ucb:/usr/ccs/bin:/usr/local/lib > > > Regards, > Sailesh > > From: Keelie [mailto:keelie_ryan at yahoo.com] > Sent: Monday, November 28, 2011 2:23 PM > To: Sailesh > Cc: Ryan Novosielski; xymon at xymon.com; Rolands at logicaltech.com.au > Subject: Re: [Xymon] Solaris X86 xymon configure problems > > Hi All, > > Thanks for all your replies. I have already tried linking /usr/ccs/bin/ld to /usr/local/bin/ld, I found this troubleshooting step on google a few days ago, it didn’t help. I have unlinked it now and installed binutils, which has installed /usr/local/bin/ld. > I have now tried setting the xymon user path to that suggested, but unfortunately that hasn’t helped either. > > So far I have: > 1. Installed the following packages – > SMClgcc346 > SMCzlib > SMClintl > SMCliconv > SMCbinut > SMCcheck > SMCgmp > SMCcoreu > SMCcvs > SMCdb47 > SMCevtlog > SMCexpat > SMCftype > SMCfontc > SMCfping > SMCgcc > SMCxpm > SMClibpng > SMCjpeg > SMCgd > SMCncurs > SMCgdb > SMCgdbm > SMCgettxt > SMClibart > SMClibnet > SMClibt > SMCpcre > SMCslang > SMCglib > SMCmake > SMCossl > SMCsasl > SMColdap > SMCperl > SMCreadl > SMCrrdt > > 2. Added $(NETLIBS) before $(LIBRTDEF ) in all the Makefiles where it was missing > 3. Edited /var/xymon/xymon-4.3.5/xymonnet/ldaptest.c to move the #endif to line 97 > 4. Edited /var/xymon/xymon-4.3.5/build/test-rrd.c to add NULL, &ymin, &ymax to line 30 > 5. Edit /var/xymon/xymon-4.3.5/web/showgraph.c to add NULL, &ymin, &ymax to line 1156 > > Thanks > Keelie > > Sent from my iPhone > > On 28 Nov 2011, at 04:12, "Sailesh" <sailesh.mohabeer at mns.intnet.mu> wrote: > > Hi, > > The path for the xymon user should be in this order to avoid the compilation problem. > > PATH=/usr/bin:/usr/sbin:/usr/local/bin:/usr/X11/bin:/usr/openwin/bin:/usr/ucb:/usr/ccs/bin:/usr/local/lib > > > Regards, > Sailesh > From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Ryan Novosielski > Sent: Saturday, November 26, 2011 4:52 AM > To: Roland Soderstrom > Cc: xymon at xymon.com > Subject: Re: [Xymon] Solaris X86 xymon configure problems > > This is absolutely not necessary and will drive your co-workers up the wall. I do not recall having any specific difficulties compiling though I do not remember which compiler. I can get back to you, but I wanted to chime in strongly against screwing around with system binaries. > > -- Sent from my Palm Pre > > On Nov 25, 2011 15:04, Roland Soderstrom <Rolands at logicaltech.com.au> wrote: > > Try using gnu make only, you need to mv /use/ccs/bin/make first and make a link to gnu make > Some packets has /use/ccs/bin/make hard coded > > Roland > > Sent from my iPhone > > On 25/11/2011, at 9:32 PM, "Keelie" <keelie_ryan at yahoo.com> wrote: > > > Can anyone please shed any light on the issue I’m having. I’ve been troubleshooting xymon installation for over a week now, each time I fix one issue I hit another. > > This is the output of my ./configure: > > Configuration script for Xymon > > This script asks a few questions and builds a Makefile to compile Xymon > > Checking your make-utility > Checking pre-requisites for building Xymon > > Checking for fping ... > Xymon has a built-in ping utility (xymonping) > However, it is not yet fully stable and therefore it > may be best to use the external fping utility instead. > I found fping in /usr/local/sbin/fping > Do you want to use it [Y/n] ? > Y > Checking to see if '/usr/local/sbin/fping 127.0.0.1' works ... > 127.0.0.1 is alive > OK, will use '/usr/local/sbin/fping' for ping tests > NOTE: If you are using an suid-root wrapper, make sure the 'xymond' > user is also allowed to run fping without having to enter passwords. > For 'sudo', add something like this to your 'sudoers' file: > xymon ALL=(ALL) NOPASSWD: /usr/local/sbin/fping > > > > Checking for RRDtool ... > Found RRDtool include files in /usr/local/rrdtool-1.2.19/include > Found RRDtool libraries in /usr/local/rrdtool-1.2.19/lib > Linking RRD with PNG library: -L/usr/lib -lpng > > > Checking for PCRE ... > Found PCRE include files in /usr/local/include > ld: warning: global symbol '_END_' has non-global binding: > (file /usr/local/lib/libpcre.so value=LOCL); > ld: warning: global symbol '_START_' has non-global binding: > (file /usr/local/lib/libpcre.so value=LOCL); > Found PCRE libraries in /usr/local/lib > > > Checking for OpenSSL ... > Found OpenSSL include files in /usr/local/ssl/include > collect2: ld terminated with signal 8 [Arithmetic Exception], core dumped > ld: warning: global symbol '_END_' has non-global binding: > (file /usr/local/ssl/lib/libssl.so value=LOCL); > ld: warning: global symbol '_START_' has non-global binding: > (file /usr/local/ssl/lib/libssl.so value=LOCL); > make: *** [test-link] Error 1 > WARNING: OpenSSL library files found in /usr/local/ssl/lib, but link fails. > Continuing with SSL support disabled. > > > Checking for LDAP ... > test-ldap.c: In function `main': > test-ldap.c:25: warning: implicit declaration of function `ldap_init' > test-ldap.c:25: warning: assignment makes pointer from integer without a cast > Found LDAP include files in /usr/include > Found LDAP libraries in /usr/lib > > > When I run make I get the following: > > CC="gcc" CFLAGS="-g -O2 -Wall -Wno-unused -D_REENTRANT -DSunOS -I. -I`pwd`/include -I/usr/local/include" LDFLAGS="" RPATHOPT="" RRDDEF="" RRDINCDIR="-I/usr/local/rrdtool-1.2.19/include" PCREINCDIR="-I/usr/local/include" NETLIBS="-lresolv -lsocket -lnsl" RRDLIBS="-L/usr/local/rrdtool-1.2.19/lib -lrrd -L/usr/lib -lpng" PCRELIBS="-L/usr/local/lib -lpcre" LIBRTDEF="-lrt" XYMONTOPDIR="/opt/xymon" XYMONHOME="/opt/xymon/server" XYMONVAR="/opt/xymon/data" XYMONLOGDIR="/var/log/xymon" XYMONHOSTNAME="swpits2" XYMONHOSTIP="127.0.0.1" XYMONHOSTOS="sunos" XYMONUSER="xymon" CGIDIR="/opt/xymon/cgi-bin" SECURECGIDIR="/opt/xymon/cgi-secure" XYMONHOSTURL="/xymon" XYMONCGIURL="/xymon-cgi" SECUREXYMONCGIURL="/xymon-seccgi" MAILPROGRAM=""mailx"" RUNTIMEDEFS="" INSTALLWWWDIR="/opt/xymon/server/www" INSTALLETCDIR="/opt/xymon/server/etc" make -C web all > make[1]: Entering directory `/var/xymon/xymon-4.3.5/web' > gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -DSunOS -I. -I/var/xymon/xymon-4.3.5/include -I/usr/local/include -o showgraph.cgi showgraph.o ../lib/libxymon.a -L/usr/local/lib -lpcre -L/usr/local/rrdtool-1.2.19/lib -lrrd -L/usr/lib -lpng -lresolv -lsocket -lnsl -lrt > collect2: ld terminated with signal 8 [Arithmetic Exception], core dumped > ld: warning: global symbol '_END_' has non-global binding: > (file /usr/local/lib/libpcre.so value=LOCL); > ld: warning: global symbol '_START_' has non-global binding: > (file /usr/local/lib/libpcre.so value=LOCL); > make[1]: *** [showgraph.cgi] Error 1 > make[1]: Leaving directory `/var/xymon/xymon-4.3.5/web' > make: *** [web-build] Error 2 > > ************************************************************************************************* > > _______________________________________________ > Xymon mailing list > Xymon at xymon.com > http://lists.xymon.com/mailman/listinfo/xymon > _______________________________________________ > Xymon mailing list > Xymon at xymon.com > http://lists.xymon.com/mailman/listinfo/xymon

4 7

file monitoring
by martin.flemming＠desy.de 30 Nov '11

30 Nov '11

Hi ! I've monitor one file, which should be updated on 4 hosts all 15 minutes On two host this analysis.cfg entry still works FILE /var/heimdal/heimdal.pag COLOR=red mtime<920 These machines are running clients with OS: SunOS netra33 5.8 Generic_108528-27 sun4u sparc SUNW,UltraAX-i2 But unfortunatley on the other two machines OS: SunOS heimdal2 5.10 Generic_141445-09 i86pc i386 i86pc i've got errro-messages "File is missing" :-( and a look into the client-data-msg shows : [file:/var/heimdal/heimdal.pag] ERROR: Value too large for defined data type Any hint is welcome :-) cheers Martin

2 6

BBALPHAMSG truncated
by gjs＠sonnit.dk 30 Nov '11

30 Nov '11

I'm currently in the progress of upgrading/replacing my old hobbit version 4.2.0 to 4.3.4 I have installed on a brand new server and I'm just testing if everything is ok. My SMS alert script seems to work ok, but the BBALPHAMSG variable seems to be truncated to around 12-16 characters, leaving the status messages incomplete. I can easily add $DOWNSECS and/or $DOWNSECSMSG and they are added to the message which then is longer of cause. The exact same script works on my old server, and by manually setting the variables I can send any text I like. Anyone seen this behavior ? ---- Running on FreeBSD 8.2-RELEASE >From /var/log/xymon/alert.log: 2011-11-29 22:12:29 Paging script /usr/local/www/xymon/server/ext/kannel-sms.sh terminated by signal 60 (not sure if signal 60 is ok) ---- Best regards Gorm

2 3

Graphing a percentage
by Paul.Root＠CenturyLink.com 30 Nov '11

30 Nov '11

Hi, We have a test watching our HP NA server and its attempts at taking a snapshot of all the customer routers. And I'd like a graph of the percentage of them up to date. The data looks something like this: Snapshot Frequency - Target: 1 day(s) 9940: Total Devices. (should be > 8000) 138: Age of most recent attempt in minutes. 0.7: Average age of attempts in days. 1.3: Age of oldest attempt in days. Current : 69.0% 6856 devices have current snapshot attempts. 0.0% of devices (0) have no attempts (threshold: 5%). yellow 31.0% of devices (3085) have past due attempts (threshold: 10%). I just changed it to give me the NCV for the percentage. However, I could change the output to whatever to get the desired result. This is what I've defined so far: xymonserver.cfg:TEST2RRD="cpu=la,disk,inode,qtree,memory,$PINGCOLUMN=tcp,http=tcp,dns=tcp,dig=tcp,time=ntpstat,vmstat,iostat,netstat,temperature,apache,bind,sendmail,mailq,nmailq=mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,files,procs=processes,ports,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot=ncv,if_load=devmon,temp=devmon,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond,nfmsgw=ncv" GRAPHS="la,disk,inode,qtree,files,processes,memory,users,vmstat,iostat,tcp.http,tcp,ncv,netstat,ifstat,mrtg::1,ports,temperature,ntpstat,apache,bind,sendmail,mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,devmon::1,if_load::1,temp,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond" NCV_snapshot="Current:GAUGE" And I restarted the xymon server. But I'm not seeing an rrd file. Any ideas? Paul Root - Engineer III Managed Services Systems - CenturyLink This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.

1 0

Feature requests, combo.d, uptime alert, xymonserver.cfg syncing
by david.gore＠verizon.com 30 Nov '11

30 Nov '11

* combo.d directory for combo includes. Helps to organize. * uptime configurable to be a red alert. Quite often a machine can reboot quickly and we can be unaware for some time, we would like to be alerted so we can restart all application processes ASAP to minimize downtime. >From xymond_client.c: if (cpucolor == COL_GREEN) cpucolor = COL_YELLOW; addtobuffer(upmsg, "&yellow Machine recently rebooted\n"); * TEST2RDD and GRAPHS variables moved to another file, perhaps an include for xymonserver.cfg? Why do I ask because we have dual Xymon servers running for redundancy and it would be nice if I could easily rsync these 2 variables in a file that does not have host specific variables. Currently I cannot rsync xymonserver.cfg because of the XYMONSERVERHOSTNAME, XYMONSERVERIP, XYMONSERVERWWWNAME variables. For the last one I am probably going to copy xymonserver.cfg to the second server and diff the files for anything but the 3 variables above and to send an alert to remind the person who made the GRAPHS and TEST2RDD changes to update the other server. As always thanks for the great work! ~David Gore

3 3

Integrating Xymon into IBM Netcool/OMNIbus
by Carl.Melgaard＠STAB.RM.DK 29 Nov '11

29 Nov '11

Hi, Do anyone forward alerts into OMNIbus - and how have you approached this? Regards, Carl Melgaard

6 9

Integrating Xymon into IBM Netcool/OMNIbus
by greg.shea＠emc.com 29 Nov '11

29 Nov '11

True, but I'm an end user :) From: Root, Paul [mailto:Paul.Root at CenturyLink.com] Sent: Tuesday, November 29, 2011 12:14 PM To: 'Gautier Begin'; shea, greg Cc: xymon at xymon.com; xymon-bounces at xymon.com; shea, greg Subject: RE: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus You will note that he works for EMC. Ionix is the product he’s using. We’re starting to migrate to it and away from Precision/Netcool/Omnibus. Paul Root - Engineer III Managed Services Systems - CenturyLink From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Gautier Begin Sent: Tuesday, November 29, 2011 11:07 AM To: greg.shea at emc.com Cc: xymon at xymon.com; xymon-bounces at xymon.com; greg.shea at emc.com Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus Hello Greg, How did you developp your own product instead of Netcool/OMNIbus (main lines)? We want to do so ot replace ou old TEC... Cordialement, Regards,Mit freundlichen Grüßen, Gautier BEGIN Admin and Tools Team CSC Computer Sciences Luxembourg S.A. 12D Impasse Drosbach L-1882 Luxembourg Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | gbegin at csc.com<mailto:gbegin at csc.com> | www.csc.com CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose • CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664 From: <greg.shea at emc.com> To: <Carl.Melgaard at STAB.RM.DK>, <xymon at xymon.com> Cc: greg.shea at emc.com Date: 11/29/2011 05:39 PM Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus ________________________________ Hi, We used to use Netcool, and we would send snmptraps from Xymon to Netcool. Currently we do the same, but with our own product. Greg Shea EMC Corporation From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard Sent: Tuesday, November 29, 2011 10:37 AM To: 'xymon at xymon.com' Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus Hi, That would be a solution – but we have 2 xymon-servers, both active, but only 1 used as primary – so I don’t see how I could manage 2 logfile-agents on both xymon-servers. Anyone else have another type of solution to this? /melgaard ________________________________ Fra: Gautier Begin [mailto:gbegin at csc.com] Sendt: 29. november 2011 10:23 Til: Carl Melgaard Cc: xymon at xymon.com<mailto:xymon at xymon.com>; xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> Emne: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus Carl, I'm currently sending events from XYMON to TEC (the previous correlation sever from IBM). In the hobbit-alaerts.cfg I put these lines: HOST=* SCRIPT /project/hobbit0/bin/tec_link.pl any REPEAT=30 FORMAT=SMS This is script is triggered by each new alarm and old ones every 30minutes. It's writing events in a log file in the format I want. This log file is read by a TEC agent. Cordialement, Regards,Mit freundlichen Grüßen, Gautier BEGIN Admin and Tools Team CSC Computer Sciences Luxembourg S.A. 12D Impasse Drosbach L-1882 Luxembourg Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | gbegin at csc.com<mailto:gbegin at csc.com> | www.csc.com CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose • CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664 From: Carl Melgaard <Carl.Melgaard at STAB.RM.DK> To: "xymon at xymon.com" <xymon at xymon.com> Date: 11/29/2011 09:49 AM Subject: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus ________________________________ Hi, Do anyone forward alerts into OMNIbus - and how have you approached this? Regards, Carl Melgaard_______________________________________________ Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon______________________________… Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon ________________________________ This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.

1 0