December 2015 - Xymon - Xymon mailman web

Need help with upgrade from 4.3.17 to 4.3.20
by cleaver＠terabithia.org 17 Jul '18

17 Jul '18

Hmm. So far, the only way I've been able to reproduce this is by replacing the ScriptAlias directives with mere Alias's in the xymon.conf apache config. Has there been any change in the path you've used for the CGI directory since the previous version, or is there any chance that another Alias line is taking precedence over the ScriptAlias? Do you see anything in the apache access/error logs that indicates an error? -jc On Tue, May 19, 2015 10:37 am, Cortes, Manny wrote: > Having the same problem after installing 4.3.20 on both Ubuntu server > 14.04 and 15.04. > > Thanks, > > > Manuel A Cortes > > Systems Programmer III > > [IBM_Cert] > > IBM Certified System Administrator AIX 7 > > Information Services > > 321-841-6534 > > Orlandohealth.com > > Facebook.com/orlandohealth > > Youtube.com/orlandohealth > > @orlandohealth on twitter > > > > 1414 Kuhl Avenue.,MP136 > > Orlando, Florida 32806 > > From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Asif Iqbal > Sent: Tuesday, May 19, 2015 12:59 PM > To: J.C. Cleaver > Cc: xymon at xymon.com > Subject: Re: [Xymon] Need help with upgrade from 4.3.17 to 4.3.20 > > > > On Tue, May 19, 2015 at 12:40 PM, J.C. Cleaver > <cleaver at terabithia.org<mailto:cleaver at terabithia.org>> wrote: > Hmm. It seems like it's trying to pass along the binary rather than > actually execute it. Can you > > a) validate the permissions on the various .sh files inside the > /xymon-cgi/ directory. (Wondering if there's a case where make install > doesn't set permissions properly), and > > > /var/lib/xymon/cgi-bin$ ls -al > total 6560 > drwxr-xr-x 2 root root 4096 May 19 10:19 . > drwxr-xr-x 16 xymon xymon 4096 May 19 10:19 .. > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 acknowledgements.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 appfeed-critical.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 appfeed.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 certreport.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 columndoc.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 confreport-critical.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 confreport.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 criticalview.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 csvinfo.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 datepage.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 eventlog.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 findhost.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 ghostlist.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 historylog.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 history.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 hostgraphs.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 hostlist.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 nongreen.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 notifications.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 perfdata.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 reportlog.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 report.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 showgraph.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 snapshot.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 svcstatus.sh > -rwxr-xr-x 32 xymon xymon 255968 May 19 10:19 topchanges.sh > > > b) verify that the ScriptAlias or ExecCGI options are still present in > apache.conf. > > > grep xymon-cgi /etc/apache2/sites-enabled/xymon-apache.conf > # "/xymon" and "/xymon-cgi" URLs. > ScriptAlias /xymon-cgi/ "/var/lib/xymon/cgi-bin/" > RewriteRule ^/xymon-cgi/bb-hist.sh /xymon-cgi/history.sh [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-eventlog.sh /xymon-cgi/eventlog.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-rep.sh /xymon-cgi/report.sh [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-replog.sh /xymon-cgi/reportlog.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-snapshot.sh /xymon-cgi/snapshot.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-findhost.sh /xymon-cgi/findhost.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-csvinfo.sh /xymon-cgi/csvinfo.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbitcolumn.sh /xymon-cgi/columndoc.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-datepage.sh /xymon-cgi/datepage.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbitgraph.sh /xymon-cgi/showgraph.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-hostsvc.sh /xymon-cgi/svcstatus.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/bb-histlog.sh /xymon-cgi/historylog.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-confreport.sh /xymon-cgi/confreport.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-confreport-critical.sh > /xymon-cgi/confreport-critical.sh [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-nkview.sh /xymon-cgi/criticalview.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-certreport.sh /xymon-cgi/certreport.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-nongreen.sh /xymon-cgi/nongreen.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-hostgraphs.sh /xymon-cgi/hostgraphs.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-ghosts.sh /xymon-cgi/ghostlist.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-notifylog.sh /xymon-cgi/notifications.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-hostlist.sh /xymon-cgi/hostlist.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-perfdata.sh /xymon-cgi/perfdata.sh > [R=permanent,L] > RewriteRule ^/xymon-cgi/hobbit-topchanges.sh /xymon-cgi/topchanges.sh > [R=permanent,L] > > > HTH, > > -jc > > > On Tue, May 19, 2015 7:56 am, Asif Iqbal wrote: >> I am not sure what I need to after the upgrade for the columns to show >> data >> instead of >> something like this >> >> >> ELF ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½>ï¿½ ï¿½ï¿½ï¿½ >> @ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ Ã >> ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½8ï¿½ ï¿½@ï¿½%ï¿½"ï¿½ ï¿½ï¿½ï¿½ >> ï¿½ï¿½ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½Ã¸ >> ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½Ã¸ ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½ >> ï¿½ï¿½ï¿½8 ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½8 >> @ï¿½ï¿½ï¿½ï¿½ï¿½8 @ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ >> ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ ï¿½ï¿½ï¿½ >> ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½@ï¿½ï¿½ï¿½ï¿½ï¿½Ã¤Ã¤ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½Ã¤Ã¤ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ï¿½ >> >> I removed FollowSymLinks from xymon-apache.conf file under /xymon-cgi/ >> and /xymon-seccgi/ and restarted. >> >> I am using ubuntu >> >> -- >> Asif Iqbal >> PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu<http://pgp.mit.edu> >> A: Because it messes up the order in which people normally read text. >> Q: Why is top-posting such a bad thing? >> _______________________________________________ >> Xymon mailing list >> Xymon at xymon.com<mailto:Xymon at xymon.com> >> http://lists.xymon.com/mailman/listinfo/xymon >> > > > > > -- > Asif Iqbal > PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu<http://pgp.mit.edu> > A: Because it messes up the order in which people normally read text. > Q: Why is top-posting such a bad thing? > > ________________________________ > > This e-mail message and any attached files are confidential and are > intended solely for the use of the addressee(s) named above. If you are > not the intended recipient, any review, use, or distribution of this > e-mail message and any attached files is strictly prohibited. > > This communication may contain material protected by Federal privacy > regulations, attorney-client work product, or other privileges. If you > have received this confidential communication in error, please notify the > sender immediately by reply e-mail message and permanently delete the > original message. To reply to our email administrator directly, send an > email to: postmaster at orlandohealth.com . > > If this e-mail message concerns a contract matter, be advised that no > employee or agent is authorized to conclude any binding agreement on > behalf of Orlando Health by e-mail without express written confirmation by > an officer of the corporation. Any views or opinions presented in this > e-mail are solely those of the author and do not necessarily represent > those of Orlando Health. >

8 25

Recovery notifications not generated when test goes red->yellow->green?
by hobbit＠elyograg.org 13 Dec '17

13 Dec '17

It appears that if a test goes from the red state, to the yellow state, and then to the green state, no recovery notification is sent. If it goes directly from red to green, then we get a notification. Initial notifications are only sent on RED and PURPLE. We have recovery notifications configured for most tests. Xymon server is 4.3.21, built using makerpm.sh and installed with yum on CentOS 6. I do not know whether our previous version (4.3.14) behaved similarly. It was almost an accident that I discovered the problem at all. Is this expected behavior? If it is, can I change it? Thanks, Shawn

4 3

DNS failures causing "runtime longer than time limit"
by jlaidman＠rebel-it.com.au 11 Sep '17

11 Sep '17

Hi I'm running Xymon v4.3.10 on Linux, and I'm quite sure it's compiled with c-ares support. I have 12 new DNS servers that were added to Xymon about one month ago. All of my server entries in hosts.cfg have "testip". The tasks.cfg runs xymonet with "--dns-timeout=3". The hosts entries look like so: 10.10.10.1 dnshost1.example.com # testip dns=NS:example.com,SOA: example.com About a week ago, connectivity to all of these servers failed, and at the same time, the xymonnet run time jumped from less than 15 seconds to about 330 seconds, so about 315 seconds extra. The xymonnet page says 295 seconds is taken up by DNS tests. If the increase in time taken is about 315 and is entirely due to the 12 servers failing, then each failed server is adding about 26 seconds to the total run time. I don't think this should be happening like this. With two DNS checks per server, the DNS checks should be taking 6 seconds each to time-out, not 26. If I run xymonnet with "--timing --no-update" and specify only one hostname, I can view the results and the timing. This shows that the ping check gets reported after about 3 seconds, and then the DNS tests are executed and take 26 seconds total. My naiive assumption was that when a server failed a ping (and didn't have "noclear" defined in hosts.cfg) then the network checks would be skipped. On re-reading the man page for hosts.cfg, it dawned on me that a failed ping simply suppresses failed test /results/, but doesn't stop the tests from being run. So the real problem is that the "--dns-timeout=3" is not being taken into consideration by xymonnet. If I run xymonnet with "--debug" it tells me: 1900 2015-06-03 12:02:20 ares_search: tlookup='example.com', class=1, type=2 1900 2015-06-03 12:02:20 ares_search: tlookup='example.com', class=1, type=6 1900 2015-06-03 12:02:20 Processing 0 DNS lookups with ARES 1900 2015-06-03 12:02:46 Finished ARES queue after loop 423 This is peculiar. Why would it say "processing 0 DNS lookups" when there are two lookups to test? Could this be because xymonnet hasn't actually been built with ARES support and I didn't know it? Is there a good way to tell? If I add "--no-ares" I get the same results perhaps suggesting a lack of ARES support. On the other hand, if I add "timeout:3" and "attempts:1" into resolv.conf, I also get the same results. If I run "nm /path/to/xymonnet | grep gethostby" it returns "ares_gethostbyname". Just for fun, I compiled Xymon v4.3.21 and ran the xymonnet binary from there, with no change in behaviour. I also tried removing the "--dns-timeout" option so that it defaults to 30 seconds, but still no change - 26 seconds for two DNS tests. So, I'm not really sure what the problem is, but xymonnet certainly isn't behaving as I would expect. Cheers Jeremy

2 3

EXTIME still valid ?
by rltexas1＠gmail.com 22 Jun '16

22 Jun '16

Is the EXTIME option still valid in the alerts.cfg I am having problems testing the following EXTIME=1:1140:1240 Should be exclude Monday's 11:40 to 12:40. Will test EXTIME=M:1140:1240 But if it's M for Monday what would Sunday be ? Thanks

4 4

Temperature plugin for xymon
by Foster.Patch＠accuweather.com 14 Jan '16

14 Jan '16

Hello, I’ve been browsing the internet for a plugin/extension that will monitor server temperature and alarm if it gets too high. I have been unsuccessful, mostly because the links I find lead to dead pages. I was wondering if there was anyone here who has used on of these and can recommend a reliable download. Thank you! -Foster Patch

3 2

MAGMA XYMon Web GUI Admin Now Available!
by sanderson＠CORNETSER.com 07 Jan '16

07 Jan '16

Henrik and Fellow Xymoners, Just for you I have pushed off any real work for today just to get you all a first release of MAGMA the XYMon Web GUI Admin. MAGMA is an add-on web GUI for managing Host, Groups and Alarms on a XYmon 4.3 or newer system. You can find MAGMA at http://www.squidworks.net/magma/ There you will find the description, screen shots and features of MAGMA along with the link to download the source package. It requires MySQL and PHP5 and is very simple to install. All supporting information is included in the tarball. How does it work? --------------------------- It stores all alarm and host/group configs in the SQL database and rewrites the Host.cfg, Analysis.cfg and Alarms.cfg files causing the XYmon system to update its tests and pages based on the changes in these files. It will overwrite the files each time a host is added or edited making the process of updating automatic. To get the full benefit of MAGMA you should place all hosts in "central" mode, although this is not required, without it your management is somewhat restrictive (external test management only). In Central mode you get full management features for all tests. If you have any questions or need some help just send me a email @ sanderson @ squidworks.net Cubert 8-) Aka Shannon Anderson

6 5

Adding to subject line of email notice?
by wes.neal＠verizon.com 31 Dec '15

31 Dec '15

Is there a way to include the subpage as part of the subject AND the body of the email alert that Xymon sends. So if your hosts.cfg had something like this in it: subpage chicken Chicken Servers I get a CPU alert via email and the subject says: Xymon [120954] server01:cpu CRITICAL (RED) I would like the subject to say instead: Xymon [120954] server01:cpu CRITICAL (RED) Chicken Servers Thanks in advance!

1 0

Xymon and Oracle ASM?
by betsy.schwartz＠gmail.com 30 Dec '15

30 Dec '15

Anyone got any good scripts for xymon and Oracle ASM?

5 4

xymonnet crashes adding a https test
by thomleavitt＠gmail.com 29 Dec '15

29 Dec '15

I think I've just run into this same https / RHEV SSL certificate crashing Xymonnet issue. I've emailed everyone offline, but I thought I'd also drop a message here, in case anyone else has run into it, or I missed something about a resolution. I've confirmed that this problem is not triggered on non-RHEV sites. I'm using the terabithia RPMs on Scientific Linux. Regards, Thomas Leavitt file core.4818 core.4818: ELF 64-bit LSB core file x86-64, version 1 (SYSV), SVR4-style, from 'xymonnet --report --ping --checkresponse' gdb /usr/libexec/xymon/xymonnet core.4818 GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-64.el7 Copyright (C) 2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html > This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/libexec/xymon/xymonnet...Reading symbols from /usr/libexec/xymon/xymonnet...(no debugging symbols found)...done. (no debugging symbols found)...done. [New LWP 4818] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Core was generated by `xymonnet --report --ping --checkresponse'. Program terminated with signal 6, Aborted. #0 0x00007f9942cf65f7 in raise () from /lib64/libc.so.6 Missing separate debuginfos, use: debuginfo-install xymon-4.3.24-3.el7.x86_64 On Thu, Jul 17, 2014 at 9:57 PM, Jeremy Laidman <jlaidman at rebel-it.com.au> wrote: > On 17 July 2014 19:57, Ing. Mario De Chenno <mario.dechenno at unina2.it> > wrote: > >> 4.3.17 >> > > OK, I think it's a bug caused by a malformed certificate. In this line: > > certstart = strdup(xymon_ASN1_UTCTIME(X509_get_notBefore(peercert))); > > strdup() will segfault if it gets a null parameter. xymon_ASN1_UTCTIME() > returns a null parameter if X509_get_notBefore() returns a value that's too > small in size, and perhaps if it returns null. > > I think something like this would be better: > > certstart_p = xymon_ASN1_UTCTIME(X509_get_notBefore(peercert)); > if (certstart_p == NULL){ > errprintf("Invalid certificate\n"); > return NULL; > } > certstart = strdup(certstart_p); > > In fact probably better to use strndup() to reduce the risk of buffer > overflows. > > Please note: I'm not a programmer, and the above code is untested, > probably contains bugs, and may cause your house to burn down and other > nasty things. > > Cheers > Jeremy > > > _______________________________________________ > Xymon mailing list > Xymon at xymon.com > http://lists.xymon.com/mailman/listinfo/xymon > >

2 1

Monitoring process with regex - fails with 4.3.4 and BBWin 0.13
by sirusirus14＠gmail.com 21 Dec '15

21 Dec '15

Hello Cleaver, Thank you for your advice. I try to converting * to .*, but now the same result. Will the regular expression does not work in the setting of BBWin.cfg? Someone please tell me. 2015-11-28 13:12 GMT+09:00 J.C. Cleaver <cleaver at terabithia.org>: > > > > On Wed, November 25, 2015 11:51 pm, Seiichirou Hiraoka wrote: > > Hello > > > > I will use the BBWin 0.13 in Windows Server 2012, the Xymon 4.3.4 on > > CentOS > > I use. > > > > In order to monitor the regular expression to the Windows process, we set > > as follows in the BBWin.cfg of Windows Server. > > > > <procs> > > <setting name "notepad" rule = "= 2" alarmcolor = "red" /> > > <setting name "% notepad C: \ Users \ Administrator \ Desktop \ > > test.txt" rule = "= 2" alarmcolor = "red" /> > > <setting name "% notepad *" rule = "= 2" alarmcolor = "red" /> > > <setting name "% ^ notepad *" rule = "= 2" alarmcolor = "red" /> > > </ procs> > > > > The first line "notepad" only I've correctly match, the rest regular > > expression > > does not match. > > Please tell me if there is a mistake. > > > > Hi, > > I'm not that experienced with BBWin (or at least, not in the last 10 years > or so), but have you tried converting the "*" to ".*"? I'm not sure which > style of regex is used there for evaluation. > > > -jc > >

1 0