April 2016 - Xymon - Xymon mailman web

Disk Usage graph legend missing a partition
by jborissr＠gmail.com 01 Apr '16

01 Apr '16

I am running xymon 4.3.25 on Ubuntu. On the disk usage page I can see all of my partitions but in the graph it is not showing one of the partitions. On disk page I have /stand /u3 /u2 /u / But in the graph the legend shows / /stand /u2 Where do I go to make sure all of the partitions are showing up in the graph? It came to my attention today when one partition hit the panic level and as I was correcting it I noticed the partition missing in the graph. -- John J. Boris, Sr.

1 0

Trouble with update rrd for graph : " illegal attempt to update"
by diffusion＠bulot-fr.com 01 Apr '16

01 Apr '16

Hello My graph show me dot instead beautifull lines, so i look to /var/log/hobbit/rrd-status.log and i saw that (sample for Download check) : "RRD error updating /var/lib/hobbit/rrd/raspberrypi/speedtest,Download.rrd from 192.168.10.1: /var/lib/hobbit/rrd/raspberrypi/speedtest,Download.rrd: illegal attempt to update using time 1459527862 when last update time is 1459527862 (minimum one second step) " with rrdtool dump /var/lib/hobbit/rrd/raspberrypi/speedtest,Download.rrd, i see (hope cut are at the good place) [...] <step>300</step>  [...] <name> lambda </name> <type> GAUGE </type> <minimal_heartbeat>600</minimal_heartbeat> <min>NaN</min> <max>NaN</max> <database>  <row><v>NaN</v></row>  <row><v>NaN</v></row> [...]  <row><v>8.7852800000e+01</v></row> [...] It seem there 'NaN' (Not a Number) if the new value is the same as the previous value. I didn't change refresh (default : 5 minutes) My ncv values, are write like that first values are convert to integer, the other are the real values: Ping: 39 Download: 80 Upload: 19 [blahblah] contenu de /home/debit/data/speedtest-20160401-1817 : Ping: 38.97 ms Download: 79.68 Mbit/s Upload: 19.20 Mbit/s I suppose the Ping, Download, Upload are forgiven because *:NONE in the ncv definition (see below) /etc/hobbit/hobbitgraph.d/speedtest.cfg TITLE SpeedTest YAXIS ms DEF:PING=speedtest,Ping.rrd:lambda:AVERAGE DEF:DOWLOAD=speedtest,Download.rrd:lambda:AVERAGE DEF:UPLOAD=speedtest,Upload.rrd:lambda:AVERAGE LINE2:PING#00ff33:Ping GPRINT:PING:LAST: \: %5.0lf (cur) GPRINT:PING:MAX: \: %5.0lf (max) GPRINT:PING:MIN: \: %5.0lf (min) GPRINT:PING:AVERAGE: \: %5.0lf (avg)\n LINE2:DOWLOAD#ff3300:Download GPRINT:DOWLOAD:LAST: \: %5.0lf (cur) GPRINT:DOWLOAD:MAX: \: %5.0lf (max) GPRINT:DOWLOAD:MIN: \: %5.0lf (min) GPRINT:DOWLOAD:AVERAGE: \: %5.0lf (avg)\n LINE2:UPLOAD#3300ff:Upload GPRINT:UPLOAD:LAST: \: %5.0lf (cur) GPRINT:UPLOAD:MAX: \: %5.0lf (max) GPRINT:UPLOAD:MIN: \: %5.0lf (min) GPRINT:UPLOAD:AVERAGE: \: %5.0lf (avg)\n /etc/hobbit/hobbitserver.d/speedtest.cfg TEST2RRD="$TEST2RRD,speedtest=ncv" SPLITNCV_speedtest="Ping:GAUGE,Download:GAUGE,Upload:GAUGE,*:NONE" GRAPHS="$GRAPHS,speedtest" So what wrong ? lots of information but i'm not understang all of them (maybe my english is to bad ?)

1 0

Analysis & Alerts
by davieb＠gmail.com 01 Apr '16

01 Apr '16

I'm running version 4.3.17 and I have a problem getting alerts out... In my analsis.cfg HOST=larry DISK /data 90 95 GROUP=pita DEFAULT DISK * 90 95 In the alerts.cfg GROUP=pita SERVICE=disk MAIL dbas at something.net DURATION>11 REPEAT=240 RECOVERED SERVICE=disk COLOR=red MAIL admin at something.net DURATION>16 REPORT=240 RECOVERED SERVICE=disk COLOR=yellow MAIL admin at something.net DURATION>16 REPORT=240 RECOVERED Now, it seems that only the emails are being sent by the SERVICE=disk reference. As the dbas do not receive the notice. I ran the xymoncmd xymond_alert --dump-config and I see both entries: 120 SERVICE=disk COLOR=red 122 SERVICE=disk COLOR=yellow 131 GROUP=dbas Any insight would be appreciated! Dave

1 0

Splitting acks in one page
by tomas.wachtarczyk＠gmail.com 01 Apr '16

01 Apr '16

Hello, Sorry to bother you again. I found this in xymond.chk file  /appl/retek (94% used) has reached the PANIC level (90%) Then ./xymond/xymond_client.c Could be possible to acks separately those ID's in one TEST page ? Does have this ID some special usage? Thanks W. On Mon, Mar 14, 2016 at 2:09 PM, Tomáš Wachtarczyk < tomas.wachtarczyk at gmail.com> wrote: > Hello, > > Is it possible to multi-acknowledge problems from one page ? > > Example > > /usr 95% > /application/whatever 100% > > Usr will go to unix admins > /application will go to application team. > > I understand GROUP on DISK in analysis.cfg, but it does not seem to be > right thing for me. > > Because it will be 2 different incidents. > Can i acknowledge disk.usr with comment "some incident number" and > disk.application with "different incident number" when both are under disk > page ? > > Thank you for hint, > > W. >

1 0