Xymon

Download

xymon@xymon.com

March 2017

43 participants
42 discussions

Issues with no password prompt for admin cgi
by sys1002＠yahoo.com 02 Mar '17

02 Mar '17

Sending apache.conf as requested : This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so 'log/access_log' # with ServerRoot set to '/www' will be interpreted by the # server as '/www/log/access_log', where as '/log/access_log' will be # interpreted as '/log/access_log'. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to specify a local disk on the # Mutex directive, if file-based mutexes are used. If you wish to share the # same ServerRoot for multiple httpd daemons, you will need to change at # least PidFile. # ServerRoot "/etc/httpd" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # Include conf.modules.d/*.conf # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User apache Group apache # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin at your-domain.com # ServerAdmin root at localhost # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:80 # # Deny access to the entirety of your server's filesystem. You must # explicitly permit access to web content directories in other # <Directory> blocks below. # <Directory /> AllowOverride none Require all denied </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/var/www/html" # # Relax access to content within /var/www. # <Directory "/var/www"> AllowOverride None # Allow open access: Require all granted </Directory> # Further relax access to the default document root: <Directory "/var/www/html"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.4/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Require all granted </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ".ht*"> Require all denied </Files> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # #CustomLog "logs/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # CustomLog "logs/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" </IfModule> # # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/var/www/cgi-bin"> AllowOverride None Options None Require all granted </Directory> <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig /etc/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> # # Specify a default charset for all content served; this enables # interpretation of all content as UTF-8 by default. To use the # default browser choice (ISO-8859-1), or to allow the META tags # in HTML content to override this choice, comment out this # directive: # AddDefaultCharset UTF-8 <IfModule mime_magic_module> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # MIMEMagicFile conf/magic </IfModule> # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # Defaults if commented: EnableMMAP On, EnableSendfile Off # #EnableMMAP off EnableSendfile on # Supplemental configuration # # Load config files in the "/etc/httpd/conf.d" directory, if any. IncludeOptional conf.d/*.conf # This file is for Apache 1.3.x and Apache 2.x # # Add this to your Apache configuration, it makes # the Xymon webpages and cgi-scripts available in the # "/xymon" and "/xymon-cgi" URLs. # NB: The "Alias" line below must NOT be used if you have # the Xymon webfiles as the root URL. In that case, # you should instead set this: # # DocumentRoot /home/xymon/server/www Alias /xymon "/home/xymon/server/www" <Directory "/home/xymon/server/www"> Options Indexes FollowSymLinks Includes MultiViews <IfModule mod_authz_core.c> # Apache 2.4+ Require all granted </IfModule> <IfModule !mod_authz_core.c> Order deny,allow Allow from all </IfModule> </Directory> ScriptAlias /xymon-cgi/ "/home/xymon/cgi-bin/" <Directory "/home/xymon/cgi-bin"> AllowOverride None Options ExecCGI Includes <IfModule mod_authz_core.c> # Apache 2.4+ Require all granted </IfModule> <IfModule !mod_authz_core.c> Order deny,allow Allow from all </IfModule> </Directory> ScriptAlias /xymon-seccgi/ "/home/xymon/cgi-secure/" <Directory "/home/xymon/cgi-secure"> AllowOverride None Options ExecCGI Includes <IfModule mod_authz_core.c> # Apache 2.4+ Require all granted </IfModule> <IfModule !mod_authz_core.c> Order deny,allow Allow from all </IfModule> # Password file where users with access to these scripts are kept. # Although expected in $XYMONHOME/etc/ by the useradm and chpasswd # scripts, files here can be read with the "config" message type, # which allows status-privileged clients to read arbitrary regular files # from the directory. # # This file should be owned and readable only by the apache server user, # and ideally merely a symlink to a location outside of $XYMONHOME/etc/ # # Create it with: # htpasswd -c /home/xymon/server/etc/xymonpasswd USERNAME # chown apache:apache /home/xymon/server/etc/xymonpasswd # chmod 640 /home/xymon/server/etc/xymonpasswd # Add more users / change passwords with: "htpasswd /home/xymon/server/etc/xymonpasswd USERNAME" # # You can also use a group file to restrict admin access to members of a # group, instead of anyone who is logged in. In that case you must setup # the "xymongroups" file, and change the "Require" settings to require # a specific group membership. See the Apache docs for more details. AuthUserFile /home/xymon/server/etc/xymonpasswd AuthGroupFile /home/xymon/server/etc/xymongroups AuthType Basic AuthName "Xymon Administration" # "valid-user" restricts access to anyone who is logged in. Require valid-user # "group admins" restricts access to users who have logged in, AND # are members of the "admins" group in xymongroups. # Require group admins </Directory> # Rewrite-rules for migrating from the URL's used in Hobbit RewriteEngine On RewriteRule ^/xymon/bb.html /xymon/xymon.html [R=permanent,L] RewriteRule ^/xymon/bb2.html /xymon/nongreen.html [R=permanent,L] RewriteRule ^/xymon/bbnk.html /xymon/critical.html [R=permanent,L] RewriteRule ^/xymon-cgi/bb-hist.sh /xymon-cgi/history.sh [R=permanent,L] RewriteRule ^/xymon-cgi/bb-eventlog.sh /xymon-cgi/eventlog.sh [R=permanent,L] RewriteRule ^/xymon-cgi/bb-rep.sh /xymon-cgi/report.sh [R=permanent,L] RewriteRule ^/xymon-cgi/bb-replog.sh /xymon-cgi/reportlog.sh [R=permanent,L] RewriteRule ^/xymon-cgi/bb-snapshot.sh /xymon-cgi/snapshot.sh [R=permanent,L] RewriteRule ^/xymon-cgi/bb-findhost.sh /xymon-cgi/findhost.sh [R=permanent,L] RewriteRule ^/xymon-cgi/bb-csvinfo.sh /xymon-cgi/csvinfo.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbitcolumn.sh /xymon-cgi/columndoc.sh [R=permanent,L] RewriteRule ^/xymon-cgi/bb-datepage.sh /xymon-cgi/datepage.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbitgraph.sh /xymon-cgi/showgraph.sh [R=permanent,L] RewriteRule ^/xymon-cgi/bb-hostsvc.sh /xymon-cgi/svcstatus.sh [R=permanent,L] RewriteRule ^/xymon-cgi/bb-histlog.sh /xymon-cgi/historylog.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-confreport.sh /xymon-cgi/confreport.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-confreport-critical.sh /xymon-cgi/confreport-critical.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-nkview.sh /xymon-cgi/criticalview.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-certreport.sh /xymon-cgi/certreport.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-nongreen.sh /xymon-cgi/nongreen.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-hostgraphs.sh /xymon-cgi/hostgraphs.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-ghosts.sh /xymon-cgi/ghostlist.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-notifylog.sh /xymon-cgi/notifications.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-hostlist.sh /xymon-cgi/hostlist.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-perfdata.sh /xymon-cgi/perfdata.sh [R=permanent,L] RewriteRule ^/xymon-cgi/hobbit-topchanges.sh /xymon-cgi/topchanges.sh [R=permanent,L] RewriteRule ^/xymon-seccgi/bb-ack.sh /xymon-seccgi/acknowledge.sh [R=permanent,L] RewriteRule ^/xymon-seccgi/hobbit-enadis.sh /xymon-seccgi/enadis.sh [R=permanent,L] RewriteRule ^/xymon-seccgi/hobbit-nkedit.sh /xymon-seccgi/criticaleditor.sh [R=permanent,L] RewriteRule ^/xymon-seccgi/hobbit-ackinfo.sh /xymon-seccgi/ackinfo.sh [R=permanent,L] RewriteRule ^/xymon-seccgi/hobbit-useradm.sh /xymon-seccgi/useradm.sh [R=permanent,L]

2 2

Windows Services.. Check all automatic?
by l＠s-z.dk 01 Mar '17

01 Mar '17

Hi Guys I have been using Bigbrother // BBGen / Hobbit / XYMon for years, but have just installed the lastest version and the PS windows client... Now I easily can list a number of windows services to monitor. But can I anyhow just ask xymon to monitor that all "Automatically" windows services are running? /Lasse

3 2