- Xymon - Xymon mailman web

[hobbit] devmon help
by tmelcher＠saionline.com 15 Sep '06

15 Sep '06

Thanks Steve Never went out 4 v's (-vvvv) only 3 and it didn't show me the error I needed to see. Have it working, thanks again Trent Melcher Unix/Linux Systems Administrator Securities America Financial Corporation (402) 399-9111 x2774 tmelcher at saionline.com Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC. Advisory services offered through Securities America Advisors, Inc., an SEC Registered Investment Advisory > -----Original Message----- > From: Aiello, Steve (GE, Corporate, consultant) > [mailto:steve.aiello at ge.com] > Sent: Friday, September 15, 2006 11:22 AM > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > You may want to use the Devmon mailing list for your devmon > woes, devmon-support-bounces at lists.sourceforge.net. > > By default, when you start devmon, devmon runs as a daemon. > to troubleshoot you can use the -f option to keep it in the > foreground, i.e. ./devmon -f -vvvv > > that may output information to point you in the right direction. > > > -----Original Message----- > > From: Trent Melcher [mailto:tmelcher at saionline.com] > > Sent: Friday, September 15, 2006 12:01 PM > > To: hobbit at hswn.dk > > Subject: RE: [hobbit] devmon help > > > > > > Also forgot to mention my devmon.log file is empty. > > Permissions on it are fine. > > > > Trent > > > > Trent Melcher > > Unix/Linux Systems Administrator > > Securities America Financial Corporation > > (402) 399-9111 x2774 > > tmelcher at saionline.com > > Securities America, Inc., a Registered Broker/Dealer, Member > > NASD/SIPC. Advisory services offered through Securities America > > Advisors, Inc., an SEC Registered Investment Advisory > > > > > > > > > -----Original Message----- > > > From: Jones, Jason (Altrincham) [mailto:JasonAS_Jones at mentor.com] > > > Sent: Friday, September 15, 2006 10:18 AM > > > To: hobbit at hswn.dk > > > Subject: RE: [hobbit] devmon help > > > > > > Related to this would anyone be willing to send me any > > cisco, hp/dell > > > (printer) oids they know work? > > > > > > But as for helping as Johann said you add a DEVMON tag to the > > > bb-hosts for the switch etc you want tested (you can force using > > > DEVMON:model(<vendor>;<model>) ) after you have done this you run > > > devmon --readbbhosts and it will search through for > usable tests it > > > can run and report any entries that do not have matching > templates, > > > you can also look in /var/logs/devmon.log for useful > output messages > > > > > > Any templates you create must follow this structure > > > > > > DIR:name (best to use vendor-model) > > > | > > > |--specs (must contain vendor, model, snmpver and sysDesc) > > > |--DIR:test (this will be the name reported to hobbit) > > > | > > > |-- oids (contains oids and handles you assign > > > |-- message (message format reported to hobbit) > > > |-- thresholds(when to generate status changes > and messages > > > to > > > use) > > > |-- transforms (data manipulation) > > > |-- exceptions (what is sounds like) > > > > > > Thanks, > > > Jason > > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > >

1 0

[hobbit] devmon help
by tmelcher＠saionline.com 15 Sep '06

15 Sep '06

Also forgot to mention my devmon.log file is empty. Permissions on it are fine. Trent Trent Melcher Unix/Linux Systems Administrator Securities America Financial Corporation (402) 399-9111 x2774 tmelcher at saionline.com Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC. Advisory services offered through Securities America Advisors, Inc., an SEC Registered Investment Advisory > -----Original Message----- > From: Jones, Jason (Altrincham) [mailto:JasonAS_Jones at mentor.com] > Sent: Friday, September 15, 2006 10:18 AM > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > Related to this would anyone be willing to send me any cisco, hp/dell > (printer) oids they know work? > > But as for helping as Johann said you add a DEVMON tag to the > bb-hosts for the switch etc you want tested (you can force using > DEVMON:model(<vendor>;<model>) ) after you have done this you > run devmon --readbbhosts and it will search through for > usable tests it can run and report any entries that do not > have matching templates, you can also look in > /var/logs/devmon.log for useful output messages > > Any templates you create must follow this structure > > DIR:name (best to use vendor-model) > | > |--specs (must contain vendor, model, snmpver and sysDesc) > |--DIR:test (this will be the name reported to hobbit) > | > |-- oids (contains oids and handles you assign > |-- message (message format reported to hobbit) > |-- thresholds(when to generate status changes and > messages to > use) > |-- transforms (data manipulation) > |-- exceptions (what is sounds like) > > Thanks, > Jason > > -----Original Message----- > From: Johann Eggers [mailto:Johann.Eggers at teleatlas.com] > Sent: 15 September 2006 16:07 > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > A little correction: > > Which device to query is determined by entries in the bb-hosts file. > > You need the templates to specify what OID's to query, how to > calculate/handle the output, define thresholds, generating > the message... > > -----Original Message----- > From: Johann Eggers [mailto:Johann.Eggers at teleatlas.com] > Sent: Freitag, 15. September 2006 16:27 > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > We are currently monitor Cisco 6506, Cisco 4003, Cisco 1700 > and Netapp boxes with devmon. > > You have to create a template for the devices named by the > model in the System Description of the snmp output. By this > way the devmon daemon is able to determine what devices to > query. You can use existing templates as a basis and change > them to fit to your needs > > -----Original Message----- > From: Trent Melcher [mailto:tmelcher at saionline.com] > Sent: Freitag, 15. September 2006 16:05 > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > Craig > > Run strings against the hosts.db and you will see better > output. I too have been trying to setup devmon and cant get > it working either, having same problems as you. Run devmon > with the --readbbhosts option, I even used the -vv to see > some info, it identifies the switch correctly and looks like > its using the right template, but no output or anything in > the log file. > > Anyone else have this working? > > Trent Melcher > Unix/Linux Systems Administrator > Securities America Financial Corporation > (402) 399-9111 x2774 > tmelcher at saionline.com > Securities America, Inc., a Registered Broker/Dealer, Member > NASD/SIPC. > Advisory services offered through Securities America > Advisors, Inc., an SEC Registered Investment Advisory > > > > > -----Original Message----- > > From: Craig Cook [mailto:craig at cookitservices.com] > > Sent: Wednesday, September 13, 2006 10:25 PM > > To: hobbit at hswn.dk > > Subject: [hobbit] devmon help > > > > I have a cisco 3550 switch I am trying to use devmon with. > > SNMP is enabled in the switch, but devmon does not seem to > do anything > > with it. > > > > The templates dir has cisco-3500 listed as a device it > knows about... > > > > Single devmon server. > > > > solaris1:/usr/local/devmon# /usr/local/devmon/devmon --readbbhosts > > [06-09-14 at 13:01:46] Saw 5 vendors, 19 models, > > 19 sysdescs & 57 templates [06-09-14 at 13:01:46] SNMP > querying all hosts > > in bb-hosts file, please wait... > > [06-09-14 at 13:01:46] Querying new hosts using cid 'public' > and snmp v2 > > [06-09-14 at 13:01:47] DEBUG SNMP: Dethawing data for > switch1.example.com > > [06-09-14 at 13:01:47] switch1.example.com sysdesc = ::: Cisco > > Internetwork Operating System Software IOS (tm) C3550 Software > > (C3550-I5Q3L2-M), Version 12.1(22)EA1a, RELEASE SOFTWARE (fc1) > > Copyright (c) 1986-2004 by cisco Systems, Inc. > > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > > [06-09-14 at 13:01:47] switch1.example.com did not match > powerware : 9170 > > : BestLink [06-09-14 at 13:01:47] switch1.example.com did not > match apc : > > 9609 : MN: AP9606 [06-09-14 at 13:01:47] switch1.example.com did not > > match apc : > > 9205 : Mod: AP9205 [06-09-14 at 13:01:47] switch1.example.com did not > > match apc : 9619 : MN:AP9619 [06-09-14 at 13:01:47] > switch1.example.com > > did not match cisco : 1700 : C1700 [06-09-14 at 13:01:47] > > switch1.example.com did not match cisco : > > 2970 : C2970 [06-09-14 at 13:01:47] switch1.example.com did not match > > cisco : 3725 : C3725 [06-09-14 at 13:01:47] > switch1.example.com did not > > match cisco : 2900 : C2900 [06-09-14 at 13:01:47] Discovered > > switch1.example.com as a cisco 3550 solaris1:/usr/local/devmon# > > /usr/local/devmon/devmon --readbbhosts [06-09-14 at 13:02:11] Saw 5 > > vendors, 19 models, > > 19 sysdescs & 57 templates [06-09-14 at 13:02:11] SNMP > querying all hosts > > in bb-hosts file, please wait... > > [06-09-14 at 13:02:11] Querying pre-existing hosts [06-09-14 at 13:02:12] > > DEBUG SNMP: Dethawing data for switch1.example.com > [06-09-14 at 13:02:12] > > switch1.example.com sysdesc = ::: Cisco Internetwork > Operating System > > Software IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version > > 12.1(22)EA1a, RELEASE SOFTWARE (fc1) Copyright (c) > 1986-2004 by cisco > > Systems, Inc. > > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > > [06-09-14 at 13:02:12] switch1.example.com did not match > powerware : 9170 > > : BestLink [06-09-14 at 13:02:12] switch1.example.com did not > match apc : > > 9609 : MN: AP9606 [06-09-14 at 13:02:12] switch1.example.com did not > > match apc : > > 9205 : Mod: AP9205 [06-09-14 at 13:02:12] switch1.example.com did not > > match apc : 9619 : MN:AP9619 [06-09-14 at 13:02:12] > switch1.example.com > > did not match cisco : 1700 : C1700 [06-09-14 at 13:02:12] > > switch1.example.com did not match cisco : > > 2970 : C2970 [06-09-14 at 13:02:12] switch1.example.com did not match > > cisco : 3725 : C3725 [06-09-14 at 13:02:12] > switch1.example.com did not > > match cisco : 2900 : C2900 > > > > I changed this in dm_config.pm > > > > 'verbose' => 1, > > 'debug' => 1, > > 'print_msg' => 1, > > > > > > # vi hosts.db > > switch1.example.com^[192.168.1.2^[cisco^[3550^[all^[public^[^[ > > > > Are the "^["'s messing this up? > > > > Nothing in the devmon log file... > > > > > > Thanks > > > > Craig Cook > > -- > > Systems Monitoring Consulting and Support Services > > http://www.cookitservices.com > > > > To unsubscribe from the hobbit list, send an e-mail to > > hobbit-unsubscribe at hswn.dk > > > > > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > >

2 1

[hobbit] devmon help
by Johann.Eggers＠teleatlas.com 15 Sep '06

15 Sep '06

Installation documentation is under docs/INSTALLATION Double check your devmon.cfg file This is in my devmon.log $ more devmon.log [06-07-11 at 12:47:51] ---Initilizing devmon... [06-07-11 at 12:47:51] Node 0 reporting to xxxx [06-07-11 at 12:47:51] Running under process id: 10095 [06-07-11 at 12:47:51] Entering poll loop When the devmon daemon is running you should normaly have also a devmon.pid file -----Original Message----- From: Trent Melcher [mailto:tmelcher at saionline.com] Sent: Freitag, 15. September 2006 18:01 To: hobbit at hswn.dk Subject: RE: [hobbit] devmon help Also forgot to mention my devmon.log file is empty. Permissions on it are fine. Trent Trent Melcher Unix/Linux Systems Administrator Securities America Financial Corporation (402) 399-9111 x2774 tmelcher at saionline.com Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC. Advisory services offered through Securities America Advisors, Inc., an SEC Registered Investment Advisory > -----Original Message----- > From: Jones, Jason (Altrincham) [mailto:JasonAS_Jones at mentor.com] > Sent: Friday, September 15, 2006 10:18 AM > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > Related to this would anyone be willing to send me any cisco, hp/dell > (printer) oids they know work? > > But as for helping as Johann said you add a DEVMON tag to the > bb-hosts for the switch etc you want tested (you can force using > DEVMON:model(<vendor>;<model>) ) after you have done this you > run devmon --readbbhosts and it will search through for > usable tests it can run and report any entries that do not > have matching templates, you can also look in > /var/logs/devmon.log for useful output messages > > Any templates you create must follow this structure > > DIR:name (best to use vendor-model) > | > |--specs (must contain vendor, model, snmpver and sysDesc) > |--DIR:test (this will be the name reported to hobbit) > | > |-- oids (contains oids and handles you assign > |-- message (message format reported to hobbit) > |-- thresholds(when to generate status changes and > messages to > use) > |-- transforms (data manipulation) > |-- exceptions (what is sounds like) > > Thanks, > Jason > > -----Original Message----- > From: Johann Eggers [mailto:Johann.Eggers at teleatlas.com] > Sent: 15 September 2006 16:07 > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > A little correction: > > Which device to query is determined by entries in the bb-hosts file. > > You need the templates to specify what OID's to query, how to > calculate/handle the output, define thresholds, generating > the message... > > -----Original Message----- > From: Johann Eggers [mailto:Johann.Eggers at teleatlas.com] > Sent: Freitag, 15. September 2006 16:27 > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > We are currently monitor Cisco 6506, Cisco 4003, Cisco 1700 > and Netapp boxes with devmon. > > You have to create a template for the devices named by the > model in the System Description of the snmp output. By this > way the devmon daemon is able to determine what devices to > query. You can use existing templates as a basis and change > them to fit to your needs > > -----Original Message----- > From: Trent Melcher [mailto:tmelcher at saionline.com] > Sent: Freitag, 15. September 2006 16:05 > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > Craig > > Run strings against the hosts.db and you will see better > output. I too have been trying to setup devmon and cant get > it working either, having same problems as you. Run devmon > with the --readbbhosts option, I even used the -vv to see > some info, it identifies the switch correctly and looks like > its using the right template, but no output or anything in > the log file. > > Anyone else have this working? > > Trent Melcher > Unix/Linux Systems Administrator > Securities America Financial Corporation > (402) 399-9111 x2774 > tmelcher at saionline.com > Securities America, Inc., a Registered Broker/Dealer, Member > NASD/SIPC. > Advisory services offered through Securities America > Advisors, Inc., an SEC Registered Investment Advisory > > > > > -----Original Message----- > > From: Craig Cook [mailto:craig at cookitservices.com] > > Sent: Wednesday, September 13, 2006 10:25 PM > > To: hobbit at hswn.dk > > Subject: [hobbit] devmon help > > > > I have a cisco 3550 switch I am trying to use devmon with. > > SNMP is enabled in the switch, but devmon does not seem to > do anything > > with it. > > > > The templates dir has cisco-3500 listed as a device it > knows about... > > > > Single devmon server. > > > > solaris1:/usr/local/devmon# /usr/local/devmon/devmon --readbbhosts > > [06-09-14 at 13:01:46] Saw 5 vendors, 19 models, > > 19 sysdescs & 57 templates [06-09-14 at 13:01:46] SNMP > querying all hosts > > in bb-hosts file, please wait... > > [06-09-14 at 13:01:46] Querying new hosts using cid 'public' > and snmp v2 > > [06-09-14 at 13:01:47] DEBUG SNMP: Dethawing data for > switch1.example.com > > [06-09-14 at 13:01:47] switch1.example.com sysdesc = ::: Cisco > > Internetwork Operating System Software IOS (tm) C3550 Software > > (C3550-I5Q3L2-M), Version 12.1(22)EA1a, RELEASE SOFTWARE (fc1) > > Copyright (c) 1986-2004 by cisco Systems, Inc. > > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > > [06-09-14 at 13:01:47] switch1.example.com did not match > powerware : 9170 > > : BestLink [06-09-14 at 13:01:47] switch1.example.com did not > match apc : > > 9609 : MN: AP9606 [06-09-14 at 13:01:47] switch1.example.com did not > > match apc : > > 9205 : Mod: AP9205 [06-09-14 at 13:01:47] switch1.example.com did not > > match apc : 9619 : MN:AP9619 [06-09-14 at 13:01:47] > switch1.example.com > > did not match cisco : 1700 : C1700 [06-09-14 at 13:01:47] > > switch1.example.com did not match cisco : > > 2970 : C2970 [06-09-14 at 13:01:47] switch1.example.com did not match > > cisco : 3725 : C3725 [06-09-14 at 13:01:47] > switch1.example.com did not > > match cisco : 2900 : C2900 [06-09-14 at 13:01:47] Discovered > > switch1.example.com as a cisco 3550 solaris1:/usr/local/devmon# > > /usr/local/devmon/devmon --readbbhosts [06-09-14 at 13:02:11] Saw 5 > > vendors, 19 models, > > 19 sysdescs & 57 templates [06-09-14 at 13:02:11] SNMP > querying all hosts > > in bb-hosts file, please wait... > > [06-09-14 at 13:02:11] Querying pre-existing hosts [06-09-14 at 13:02:12] > > DEBUG SNMP: Dethawing data for switch1.example.com > [06-09-14 at 13:02:12] > > switch1.example.com sysdesc = ::: Cisco Internetwork > Operating System > > Software IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version > > 12.1(22)EA1a, RELEASE SOFTWARE (fc1) Copyright (c) > 1986-2004 by cisco > > Systems, Inc. > > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > > [06-09-14 at 13:02:12] switch1.example.com did not match > powerware : 9170 > > : BestLink [06-09-14 at 13:02:12] switch1.example.com did not > match apc : > > 9609 : MN: AP9606 [06-09-14 at 13:02:12] switch1.example.com did not > > match apc : > > 9205 : Mod: AP9205 [06-09-14 at 13:02:12] switch1.example.com did not > > match apc : 9619 : MN:AP9619 [06-09-14 at 13:02:12] > switch1.example.com > > did not match cisco : 1700 : C1700 [06-09-14 at 13:02:12] > > switch1.example.com did not match cisco : > > 2970 : C2970 [06-09-14 at 13:02:12] switch1.example.com did not match > > cisco : 3725 : C3725 [06-09-14 at 13:02:12] > switch1.example.com did not > > match cisco : 2900 : C2900 > > > > I changed this in dm_config.pm > > > > 'verbose' => 1, > > 'debug' => 1, > > 'print_msg' => 1, > > > > > > # vi hosts.db > > switch1.example.com^[192.168.1.2^[cisco^[3550^[all^[public^[^[ > > > > Are the "^["'s messing this up? > > > > Nothing in the devmon log file... > > > > > > Thanks > > > > Craig Cook > > -- > > Systems Monitoring Consulting and Support Services > > http://www.cookitservices.com > > > > To unsubscribe from the hobbit list, send an e-mail to > > hobbit-unsubscribe at hswn.dk > > > > > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

1 0

[hobbit] devmon help
by tmelcher＠saionline.com 15 Sep '06

15 Sep '06

Ok, how do I run devmon in daemon mode to capture the data? When I run devmon with no options it runs for about 15 seconds then finishes? Thanks Trent Melcher Unix/Linux Systems Administrator Securities America Financial Corporation (402) 399-9111 x2774 tmelcher at saionline.com Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC. Advisory services offered through Securities America Advisors, Inc., an SEC Registered Investment Advisory > -----Original Message----- > From: Jones, Jason (Altrincham) [mailto:JasonAS_Jones at mentor.com] > Sent: Friday, September 15, 2006 10:18 AM > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > Related to this would anyone be willing to send me any cisco, hp/dell > (printer) oids they know work? > > But as for helping as Johann said you add a DEVMON tag to the > bb-hosts for the switch etc you want tested (you can force using > DEVMON:model(<vendor>;<model>) ) after you have done this you > run devmon --readbbhosts and it will search through for > usable tests it can run and report any entries that do not > have matching templates, you can also look in > /var/logs/devmon.log for useful output messages > > Any templates you create must follow this structure > > DIR:name (best to use vendor-model) > | > |--specs (must contain vendor, model, snmpver and sysDesc) > |--DIR:test (this will be the name reported to hobbit) > | > |-- oids (contains oids and handles you assign > |-- message (message format reported to hobbit) > |-- thresholds(when to generate status changes and > messages to > use) > |-- transforms (data manipulation) > |-- exceptions (what is sounds like) > > Thanks, > Jason > > -----Original Message----- > From: Johann Eggers [mailto:Johann.Eggers at teleatlas.com] > Sent: 15 September 2006 16:07 > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > A little correction: > > Which device to query is determined by entries in the bb-hosts file. > > You need the templates to specify what OID's to query, how to > calculate/handle the output, define thresholds, generating > the message... > > -----Original Message----- > From: Johann Eggers [mailto:Johann.Eggers at teleatlas.com] > Sent: Freitag, 15. September 2006 16:27 > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > We are currently monitor Cisco 6506, Cisco 4003, Cisco 1700 > and Netapp boxes with devmon. > > You have to create a template for the devices named by the > model in the System Description of the snmp output. By this > way the devmon daemon is able to determine what devices to > query. You can use existing templates as a basis and change > them to fit to your needs > > -----Original Message----- > From: Trent Melcher [mailto:tmelcher at saionline.com] > Sent: Freitag, 15. September 2006 16:05 > To: hobbit at hswn.dk > Subject: RE: [hobbit] devmon help > > Craig > > Run strings against the hosts.db and you will see better > output. I too have been trying to setup devmon and cant get > it working either, having same problems as you. Run devmon > with the --readbbhosts option, I even used the -vv to see > some info, it identifies the switch correctly and looks like > its using the right template, but no output or anything in > the log file. > > Anyone else have this working? > > Trent Melcher > Unix/Linux Systems Administrator > Securities America Financial Corporation > (402) 399-9111 x2774 > tmelcher at saionline.com > Securities America, Inc., a Registered Broker/Dealer, Member > NASD/SIPC. > Advisory services offered through Securities America > Advisors, Inc., an SEC Registered Investment Advisory > > > > > -----Original Message----- > > From: Craig Cook [mailto:craig at cookitservices.com] > > Sent: Wednesday, September 13, 2006 10:25 PM > > To: hobbit at hswn.dk > > Subject: [hobbit] devmon help > > > > I have a cisco 3550 switch I am trying to use devmon with. > > SNMP is enabled in the switch, but devmon does not seem to > do anything > > with it. > > > > The templates dir has cisco-3500 listed as a device it > knows about... > > > > Single devmon server. > > > > solaris1:/usr/local/devmon# /usr/local/devmon/devmon --readbbhosts > > [06-09-14 at 13:01:46] Saw 5 vendors, 19 models, > > 19 sysdescs & 57 templates [06-09-14 at 13:01:46] SNMP > querying all hosts > > in bb-hosts file, please wait... > > [06-09-14 at 13:01:46] Querying new hosts using cid 'public' > and snmp v2 > > [06-09-14 at 13:01:47] DEBUG SNMP: Dethawing data for > switch1.example.com > > [06-09-14 at 13:01:47] switch1.example.com sysdesc = ::: Cisco > > Internetwork Operating System Software IOS (tm) C3550 Software > > (C3550-I5Q3L2-M), Version 12.1(22)EA1a, RELEASE SOFTWARE (fc1) > > Copyright (c) 1986-2004 by cisco Systems, Inc. > > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > > [06-09-14 at 13:01:47] switch1.example.com did not match > powerware : 9170 > > : BestLink [06-09-14 at 13:01:47] switch1.example.com did not > match apc : > > 9609 : MN: AP9606 [06-09-14 at 13:01:47] switch1.example.com did not > > match apc : > > 9205 : Mod: AP9205 [06-09-14 at 13:01:47] switch1.example.com did not > > match apc : 9619 : MN:AP9619 [06-09-14 at 13:01:47] > switch1.example.com > > did not match cisco : 1700 : C1700 [06-09-14 at 13:01:47] > > switch1.example.com did not match cisco : > > 2970 : C2970 [06-09-14 at 13:01:47] switch1.example.com did not match > > cisco : 3725 : C3725 [06-09-14 at 13:01:47] > switch1.example.com did not > > match cisco : 2900 : C2900 [06-09-14 at 13:01:47] Discovered > > switch1.example.com as a cisco 3550 solaris1:/usr/local/devmon# > > /usr/local/devmon/devmon --readbbhosts [06-09-14 at 13:02:11] Saw 5 > > vendors, 19 models, > > 19 sysdescs & 57 templates [06-09-14 at 13:02:11] SNMP > querying all hosts > > in bb-hosts file, please wait... > > [06-09-14 at 13:02:11] Querying pre-existing hosts [06-09-14 at 13:02:12] > > DEBUG SNMP: Dethawing data for switch1.example.com > [06-09-14 at 13:02:12] > > switch1.example.com sysdesc = ::: Cisco Internetwork > Operating System > > Software IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version > > 12.1(22)EA1a, RELEASE SOFTWARE (fc1) Copyright (c) > 1986-2004 by cisco > > Systems, Inc. > > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > > [06-09-14 at 13:02:12] switch1.example.com did not match > powerware : 9170 > > : BestLink [06-09-14 at 13:02:12] switch1.example.com did not > match apc : > > 9609 : MN: AP9606 [06-09-14 at 13:02:12] switch1.example.com did not > > match apc : > > 9205 : Mod: AP9205 [06-09-14 at 13:02:12] switch1.example.com did not > > match apc : 9619 : MN:AP9619 [06-09-14 at 13:02:12] > switch1.example.com > > did not match cisco : 1700 : C1700 [06-09-14 at 13:02:12] > > switch1.example.com did not match cisco : > > 2970 : C2970 [06-09-14 at 13:02:12] switch1.example.com did not match > > cisco : 3725 : C3725 [06-09-14 at 13:02:12] > switch1.example.com did not > > match cisco : 2900 : C2900 > > > > I changed this in dm_config.pm > > > > 'verbose' => 1, > > 'debug' => 1, > > 'print_msg' => 1, > > > > > > # vi hosts.db > > switch1.example.com^[192.168.1.2^[cisco^[3550^[all^[public^[^[ > > > > Are the "^["'s messing this up? > > > > Nothing in the devmon log file... > > > > > > Thanks > > > > Craig Cook > > -- > > Systems Monitoring Consulting and Support Services > > http://www.cookitservices.com > > > > To unsubscribe from the hobbit list, send an e-mail to > > hobbit-unsubscribe at hswn.dk > > > > > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > >

1 0

[hobbit] devmon help
by Johann.Eggers＠teleatlas.com 15 Sep '06

15 Sep '06

Yup, I can send you the templates we are currently using... -----Original Message----- From: Jones, Jason (Altrincham) [mailto:JasonAS_Jones at mentor.com] Sent: Freitag, 15. September 2006 17:18 To: hobbit at hswn.dk Subject: RE: [hobbit] devmon help Related to this would anyone be willing to send me any cisco, hp/dell (printer) oids they know work? But as for helping as Johann said you add a DEVMON tag to the bb-hosts for the switch etc you want tested (you can force using DEVMON:model(<vendor>;<model>) ) after you have done this you run devmon --readbbhosts and it will search through for usable tests it can run and report any entries that do not have matching templates, you can also look in /var/logs/devmon.log for useful output messages Any templates you create must follow this structure DIR:name (best to use vendor-model) | |--specs (must contain vendor, model, snmpver and sysDesc) |--DIR:test (this will be the name reported to hobbit) | |-- oids (contains oids and handles you assign |-- message (message format reported to hobbit) |-- thresholds(when to generate status changes and messages to use) |-- transforms (data manipulation) |-- exceptions (what is sounds like) Thanks, Jason -----Original Message----- From: Johann Eggers [mailto:Johann.Eggers at teleatlas.com] Sent: 15 September 2006 16:07 To: hobbit at hswn.dk Subject: RE: [hobbit] devmon help A little correction: Which device to query is determined by entries in the bb-hosts file. You need the templates to specify what OID's to query, how to calculate/handle the output, define thresholds, generating the message... -----Original Message----- From: Johann Eggers [mailto:Johann.Eggers at teleatlas.com] Sent: Freitag, 15. September 2006 16:27 To: hobbit at hswn.dk Subject: RE: [hobbit] devmon help We are currently monitor Cisco 6506, Cisco 4003, Cisco 1700 and Netapp boxes with devmon. You have to create a template for the devices named by the model in the System Description of the snmp output. By this way the devmon daemon is able to determine what devices to query. You can use existing templates as a basis and change them to fit to your needs -----Original Message----- From: Trent Melcher [mailto:tmelcher at saionline.com] Sent: Freitag, 15. September 2006 16:05 To: hobbit at hswn.dk Subject: RE: [hobbit] devmon help Craig Run strings against the hosts.db and you will see better output. I too have been trying to setup devmon and cant get it working either, having same problems as you. Run devmon with the --readbbhosts option, I even used the -vv to see some info, it identifies the switch correctly and looks like its using the right template, but no output or anything in the log file. Anyone else have this working? Trent Melcher Unix/Linux Systems Administrator Securities America Financial Corporation (402) 399-9111 x2774 tmelcher at saionline.com Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC. Advisory services offered through Securities America Advisors, Inc., an SEC Registered Investment Advisory > -----Original Message----- > From: Craig Cook [mailto:craig at cookitservices.com] > Sent: Wednesday, September 13, 2006 10:25 PM > To: hobbit at hswn.dk > Subject: [hobbit] devmon help > > I have a cisco 3550 switch I am trying to use devmon with. > SNMP is enabled in the switch, but devmon does not seem to do > anything with it. > > The templates dir has cisco-3500 listed as a device it knows about... > > Single devmon server. > > solaris1:/usr/local/devmon# /usr/local/devmon/devmon > --readbbhosts [06-09-14 at 13:01:46] Saw 5 vendors, 19 models, > 19 sysdescs & 57 templates [06-09-14 at 13:01:46] SNMP querying > all hosts in bb-hosts file, please wait... > [06-09-14 at 13:01:46] Querying new hosts using cid 'public' and > snmp v2 [06-09-14 at 13:01:47] DEBUG SNMP: Dethawing data for > switch1.example.com [06-09-14 at 13:01:47] switch1.example.com > sysdesc = ::: Cisco Internetwork Operating System Software > IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version > 12.1(22)EA1a, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2004 > by cisco Systems, Inc. > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > [06-09-14 at 13:01:47] switch1.example.com did not match > powerware : 9170 : BestLink [06-09-14 at 13:01:47] > switch1.example.com did not match apc : 9609 : MN: AP9606 > [06-09-14 at 13:01:47] switch1.example.com did not match apc : > 9205 : Mod: AP9205 [06-09-14 at 13:01:47] switch1.example.com > did not match apc : 9619 : MN:AP9619 [06-09-14 at 13:01:47] > switch1.example.com did not match cisco : 1700 : C1700 > [06-09-14 at 13:01:47] switch1.example.com did not match cisco : > 2970 : C2970 [06-09-14 at 13:01:47] switch1.example.com did not > match cisco : 3725 : C3725 [06-09-14 at 13:01:47] > switch1.example.com did not match cisco : 2900 : C2900 > [06-09-14 at 13:01:47] Discovered switch1.example.com as a cisco > 3550 solaris1:/usr/local/devmon# /usr/local/devmon/devmon > --readbbhosts [06-09-14 at 13:02:11] Saw 5 vendors, 19 models, > 19 sysdescs & 57 templates [06-09-14 at 13:02:11] SNMP querying > all hosts in bb-hosts file, please wait... > [06-09-14 at 13:02:11] Querying pre-existing hosts > [06-09-14 at 13:02:12] DEBUG SNMP: Dethawing data for > switch1.example.com [06-09-14 at 13:02:12] switch1.example.com > sysdesc = ::: Cisco Internetwork Operating System Software > IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version > 12.1(22)EA1a, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2004 > by cisco Systems, Inc. > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > [06-09-14 at 13:02:12] switch1.example.com did not match > powerware : 9170 : BestLink [06-09-14 at 13:02:12] > switch1.example.com did not match apc : 9609 : MN: AP9606 > [06-09-14 at 13:02:12] switch1.example.com did not match apc : > 9205 : Mod: AP9205 [06-09-14 at 13:02:12] switch1.example.com > did not match apc : 9619 : MN:AP9619 [06-09-14 at 13:02:12] > switch1.example.com did not match cisco : 1700 : C1700 > [06-09-14 at 13:02:12] switch1.example.com did not match cisco : > 2970 : C2970 [06-09-14 at 13:02:12] switch1.example.com did not > match cisco : 3725 : C3725 [06-09-14 at 13:02:12] > switch1.example.com did not match cisco : 2900 : C2900 > > I changed this in dm_config.pm > > 'verbose' => 1, > 'debug' => 1, > 'print_msg' => 1, > > > # vi hosts.db > switch1.example.com^[192.168.1.2^[cisco^[3550^[all^[public^[^[ > > Are the "^["'s messing this up? > > Nothing in the devmon log file... > > > Thanks > > Craig Cook > -- > Systems Monitoring Consulting and Support Services > http://www.cookitservices.com > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

1 0

[hobbit] devmon help
by Johann.Eggers＠teleatlas.com 15 Sep '06

15 Sep '06

A little correction: Which device to query is determined by entries in the bb-hosts file. You need the templates to specify what OID's to query, how to calculate/handle the output, define thresholds, generating the message... -----Original Message----- From: Johann Eggers [mailto:Johann.Eggers at teleatlas.com] Sent: Freitag, 15. September 2006 16:27 To: hobbit at hswn.dk Subject: RE: [hobbit] devmon help We are currently monitor Cisco 6506, Cisco 4003, Cisco 1700 and Netapp boxes with devmon. You have to create a template for the devices named by the model in the System Description of the snmp output. By this way the devmon daemon is able to determine what devices to query. You can use existing templates as a basis and change them to fit to your needs -----Original Message----- From: Trent Melcher [mailto:tmelcher at saionline.com] Sent: Freitag, 15. September 2006 16:05 To: hobbit at hswn.dk Subject: RE: [hobbit] devmon help Craig Run strings against the hosts.db and you will see better output. I too have been trying to setup devmon and cant get it working either, having same problems as you. Run devmon with the --readbbhosts option, I even used the -vv to see some info, it identifies the switch correctly and looks like its using the right template, but no output or anything in the log file. Anyone else have this working? Trent Melcher Unix/Linux Systems Administrator Securities America Financial Corporation (402) 399-9111 x2774 tmelcher at saionline.com Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC. Advisory services offered through Securities America Advisors, Inc., an SEC Registered Investment Advisory > -----Original Message----- > From: Craig Cook [mailto:craig at cookitservices.com] > Sent: Wednesday, September 13, 2006 10:25 PM > To: hobbit at hswn.dk > Subject: [hobbit] devmon help > > I have a cisco 3550 switch I am trying to use devmon with. > SNMP is enabled in the switch, but devmon does not seem to do > anything with it. > > The templates dir has cisco-3500 listed as a device it knows about... > > Single devmon server. > > solaris1:/usr/local/devmon# /usr/local/devmon/devmon > --readbbhosts [06-09-14 at 13:01:46] Saw 5 vendors, 19 models, > 19 sysdescs & 57 templates [06-09-14 at 13:01:46] SNMP querying > all hosts in bb-hosts file, please wait... > [06-09-14 at 13:01:46] Querying new hosts using cid 'public' and > snmp v2 [06-09-14 at 13:01:47] DEBUG SNMP: Dethawing data for > switch1.example.com [06-09-14 at 13:01:47] switch1.example.com > sysdesc = ::: Cisco Internetwork Operating System Software > IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version > 12.1(22)EA1a, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2004 > by cisco Systems, Inc. > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > [06-09-14 at 13:01:47] switch1.example.com did not match > powerware : 9170 : BestLink [06-09-14 at 13:01:47] > switch1.example.com did not match apc : 9609 : MN: AP9606 > [06-09-14 at 13:01:47] switch1.example.com did not match apc : > 9205 : Mod: AP9205 [06-09-14 at 13:01:47] switch1.example.com > did not match apc : 9619 : MN:AP9619 [06-09-14 at 13:01:47] > switch1.example.com did not match cisco : 1700 : C1700 > [06-09-14 at 13:01:47] switch1.example.com did not match cisco : > 2970 : C2970 [06-09-14 at 13:01:47] switch1.example.com did not > match cisco : 3725 : C3725 [06-09-14 at 13:01:47] > switch1.example.com did not match cisco : 2900 : C2900 > [06-09-14 at 13:01:47] Discovered switch1.example.com as a cisco > 3550 solaris1:/usr/local/devmon# /usr/local/devmon/devmon > --readbbhosts [06-09-14 at 13:02:11] Saw 5 vendors, 19 models, > 19 sysdescs & 57 templates [06-09-14 at 13:02:11] SNMP querying > all hosts in bb-hosts file, please wait... > [06-09-14 at 13:02:11] Querying pre-existing hosts > [06-09-14 at 13:02:12] DEBUG SNMP: Dethawing data for > switch1.example.com [06-09-14 at 13:02:12] switch1.example.com > sysdesc = ::: Cisco Internetwork Operating System Software > IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version > 12.1(22)EA1a, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2004 > by cisco Systems, Inc. > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > [06-09-14 at 13:02:12] switch1.example.com did not match > powerware : 9170 : BestLink [06-09-14 at 13:02:12] > switch1.example.com did not match apc : 9609 : MN: AP9606 > [06-09-14 at 13:02:12] switch1.example.com did not match apc : > 9205 : Mod: AP9205 [06-09-14 at 13:02:12] switch1.example.com > did not match apc : 9619 : MN:AP9619 [06-09-14 at 13:02:12] > switch1.example.com did not match cisco : 1700 : C1700 > [06-09-14 at 13:02:12] switch1.example.com did not match cisco : > 2970 : C2970 [06-09-14 at 13:02:12] switch1.example.com did not > match cisco : 3725 : C3725 [06-09-14 at 13:02:12] > switch1.example.com did not match cisco : 2900 : C2900 > > I changed this in dm_config.pm > > 'verbose' => 1, > 'debug' => 1, > 'print_msg' => 1, > > > # vi hosts.db > switch1.example.com^[192.168.1.2^[cisco^[3550^[all^[public^[^[ > > Are the "^["'s messing this up? > > Nothing in the devmon log file... > > > Thanks > > Craig Cook > -- > Systems Monitoring Consulting and Support Services > http://www.cookitservices.com > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

2 1

[hobbit] devmon help
by Johann.Eggers＠teleatlas.com 15 Sep '06

15 Sep '06

We are currently monitor Cisco 6506, Cisco 4003, Cisco 1700 and Netapp boxes with devmon. You have to create a template for the devices named by the model in the System Description of the snmp output. By this way the devmon daemon is able to determine what devices to query. You can use existing templates as a basis and change them to fit to your needs -----Original Message----- From: Trent Melcher [mailto:tmelcher at saionline.com] Sent: Freitag, 15. September 2006 16:05 To: hobbit at hswn.dk Subject: RE: [hobbit] devmon help Craig Run strings against the hosts.db and you will see better output. I too have been trying to setup devmon and cant get it working either, having same problems as you. Run devmon with the --readbbhosts option, I even used the -vv to see some info, it identifies the switch correctly and looks like its using the right template, but no output or anything in the log file. Anyone else have this working? Trent Melcher Unix/Linux Systems Administrator Securities America Financial Corporation (402) 399-9111 x2774 tmelcher at saionline.com Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC. Advisory services offered through Securities America Advisors, Inc., an SEC Registered Investment Advisory > -----Original Message----- > From: Craig Cook [mailto:craig at cookitservices.com] > Sent: Wednesday, September 13, 2006 10:25 PM > To: hobbit at hswn.dk > Subject: [hobbit] devmon help > > I have a cisco 3550 switch I am trying to use devmon with. > SNMP is enabled in the switch, but devmon does not seem to do > anything with it. > > The templates dir has cisco-3500 listed as a device it knows about... > > Single devmon server. > > solaris1:/usr/local/devmon# /usr/local/devmon/devmon > --readbbhosts [06-09-14 at 13:01:46] Saw 5 vendors, 19 models, > 19 sysdescs & 57 templates [06-09-14 at 13:01:46] SNMP querying > all hosts in bb-hosts file, please wait... > [06-09-14 at 13:01:46] Querying new hosts using cid 'public' and > snmp v2 [06-09-14 at 13:01:47] DEBUG SNMP: Dethawing data for > switch1.example.com [06-09-14 at 13:01:47] switch1.example.com > sysdesc = ::: Cisco Internetwork Operating System Software > IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version > 12.1(22)EA1a, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2004 > by cisco Systems, Inc. > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > [06-09-14 at 13:01:47] switch1.example.com did not match > powerware : 9170 : BestLink [06-09-14 at 13:01:47] > switch1.example.com did not match apc : 9609 : MN: AP9606 > [06-09-14 at 13:01:47] switch1.example.com did not match apc : > 9205 : Mod: AP9205 [06-09-14 at 13:01:47] switch1.example.com > did not match apc : 9619 : MN:AP9619 [06-09-14 at 13:01:47] > switch1.example.com did not match cisco : 1700 : C1700 > [06-09-14 at 13:01:47] switch1.example.com did not match cisco : > 2970 : C2970 [06-09-14 at 13:01:47] switch1.example.com did not > match cisco : 3725 : C3725 [06-09-14 at 13:01:47] > switch1.example.com did not match cisco : 2900 : C2900 > [06-09-14 at 13:01:47] Discovered switch1.example.com as a cisco > 3550 solaris1:/usr/local/devmon# /usr/local/devmon/devmon > --readbbhosts [06-09-14 at 13:02:11] Saw 5 vendors, 19 models, > 19 sysdescs & 57 templates [06-09-14 at 13:02:11] SNMP querying > all hosts in bb-hosts file, please wait... > [06-09-14 at 13:02:11] Querying pre-existing hosts > [06-09-14 at 13:02:12] DEBUG SNMP: Dethawing data for > switch1.example.com [06-09-14 at 13:02:12] switch1.example.com > sysdesc = ::: Cisco Internetwork Operating System Software > IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version > 12.1(22)EA1a, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2004 > by cisco Systems, Inc. > Compiled Fri 20-Aug-04 00:44 by yenanh ::: > [06-09-14 at 13:02:12] switch1.example.com did not match > powerware : 9170 : BestLink [06-09-14 at 13:02:12] > switch1.example.com did not match apc : 9609 : MN: AP9606 > [06-09-14 at 13:02:12] switch1.example.com did not match apc : > 9205 : Mod: AP9205 [06-09-14 at 13:02:12] switch1.example.com > did not match apc : 9619 : MN:AP9619 [06-09-14 at 13:02:12] > switch1.example.com did not match cisco : 1700 : C1700 > [06-09-14 at 13:02:12] switch1.example.com did not match cisco : > 2970 : C2970 [06-09-14 at 13:02:12] switch1.example.com did not > match cisco : 3725 : C3725 [06-09-14 at 13:02:12] > switch1.example.com did not match cisco : 2900 : C2900 > > I changed this in dm_config.pm > > 'verbose' => 1, > 'debug' => 1, > 'print_msg' => 1, > > > # vi hosts.db > switch1.example.com^[192.168.1.2^[cisco^[3550^[all^[public^[^[ > > Are the "^["'s messing this up? > > Nothing in the devmon log file... > > > Thanks > > Craig Cook > -- > Systems Monitoring Consulting and Support Services > http://www.cookitservices.com > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

1 0

[hobbit] devmon help
by fduranti＠q8.it 15 Sep '06

15 Sep '06

> I have a cisco 3550 switch I am trying to use devmon with. > SNMP is enabled in the switch, but devmon does not seem to do > anything with it. > > The templates dir has cisco-3500 listed as a device it knows about... > You've to create a template dir for cisco-3550 (just like the 3500 but change the 3500 in 3550) or it will not work because it cannot find a usable template. I don't know if this will work sometimes mostly on cisco device a xx00 device seems to have different oid from a xx50 device. To get the data you also need to run devmon as a deamon (If i remember well if you run it without any option it will go in background). The devmon --readbbhosts will only read the bbhosts and pass test information to the daemon running. Francesco

1 0

[hobbit] Problem with ncv
by fduranti＠q8.it 15 Sep '06

15 Sep '06

It works good :D thanks Francesco > -----Original Message----- > From: Henrik Stoerner [mailto:henrik at hswn.dk] > Sent: Thursday, September 14, 2006 10:54 PM > To: hobbit at hswn.dk > Subject: Re: [hobbit] Problem with ncv > > On Thu, Sep 14, 2006 at 06:10:50PM +0200, Francesco Duranti wrote: > > I've a problem with data reporting in rrd files via ncv, I've one > > script that report data in this way > > > > MySQL Connection statistics > > > > Threads = 7 > > Questions = 153015 > > Slow queries = 0</PRE> > > <DIV align=left><PRE>Opens = 0 > > Flush tables = 1 > > Open tables = 32 > > Queries per second avg = 0.135 > > > > The rrd will get MySQLConnectionstat as the name of the > first data to > > save in the rrd instead of getting Threads. > > This patch should fix it. > > > Regards, > Henrik > >

1 0

Problem with ncv
by fduranti＠q8.it 15 Sep '06

15 Sep '06

An HTML attachment was scrubbed... URL: <http://lists.xymon.com/pipermail/xymon/attachments/20060914/b9325c72/attach…>

5 7