December 2007 - Xymon - Xymon mailman web

bbtest
by NMaharaj＠tcta.co.za 11 Dec '07

11 Dec '07

Hi all, After installation of Hobbit, the bbtest is still on yellow. Probably has something to do with the "LDAP" option I selected to be on at installation. How can I overcome this ?

1 0

[hobbit] Summary data: pull from upsteam server instead of pushing to
by gumby3203＠gmail.com 10 Dec '07

10 Dec '07

Here's the situation. I have one hobbit server running on a DMZ'ed machine, and another hobbit server running on the internal network (the protected side of the DMZ). The general policy is to not allow any DMZ host to initiate connections to the internal servers (security policy and all). However, I would like to have a summary of the DMZ hobbit server to be displayed on the internal hobbit server. According to the bb-hosts man page, the "summary" command pushes data to the upstream server--in this case, it would be my internal hobbit server. Is there a way for the upstream server to pull the data instead (i.e. the internal "upstream" server pull from the DMZ'ed hobbit server)? If not currently, are there plans to add this feature to a future release of Hobbit?

2 1

[hobbit] hobit problem
by rebecca_henderson＠link.freedom.com 10 Dec '07

10 Dec '07

I did try the --local and found this in my /usr/local/hobbit/client/logs file /usr/local/hobbit/Aix5HobbitClient/client/bin/hobbitclient.sh[67]: /usr/local/hobbit/Aix5HobbitClient/client/bin/hobbitd_client: not found /usr/local/hobbit/Aix5HobbitClient/client/bin/hobbitclient.sh[67]: /usr/local/hobbit/Aix5HobbitClient/client/bin/hobbitd_client: not found /usr/local/hobbit/Aix5HobbitClient/client/bin/hobbitclient.sh[67]: /usr/local/hobbit/Aix5HobbitClient/client/bin/hobbitd_client: not found -----Original Message----- From: hobbit at hswn.dk [mailto:hobbit at hswn.dk] Sent: Monday, December 10, 2007 1:52 PM To: Rebecca Henderson; hobbit at hswn.dk Subject: RE: [hobbit] hobit problem Importance: Low Ok, I'll try the --local. Thanks -----Original Message----- From: hobbit at hswn.dk [mailto:hobbit at hswn.dk] Sent: Monday, December 10, 2007 1:17 PM To: Rebecca Henderson; hobbit at hswn.dk Subject: Re: [hobbit] hobit problem Importance: Low The default compile option is to use the server-side config. I'm not sure if it's different for AIX than unix (I don't imagine it would be), but you can check the clientlaunch.cfg file. Look for the [client] section, and if the line that looks like "CMD $HOBBITCLIENTHOME/bin/hobbitclient.sh" doesn't have "--local" appended to it, than it is using the server-side config files. Add --local and restart the hobbit client to switch to using the client-side config file. On Dec 10, 2007 4:12 PM, Rebecca Henderson <[ mailto:rebecca_henderson at link.freedom.com ]rebecca_henderson at link.freedom.com> wrote: Well, that's a good question. I would think they would use the client side. How would I know for sure. -----Original Message----- From: [ mailto:hobbit at hswn.dk ]hobbit at hswn.dk [mailto:[ mailto:hobbit at hswn.dk ]hobbit at hswn.dk] Sent: Monday, December 10, 2007 12:44 PM To: Rebecca Henderson; [ mailto:hobbit at hswn.dk ]hobbit at hswn.dk Subject: Re: [hobbit] hobit problem Importance: Low Obvious question, but are the clients configured to use the local config, or are they configured to use the server-side config? On Dec 10, 2007 3:38 PM, Rebecca Henderson <[ mailto:[ mailto:rebecca_henderson at link.freedom.com ]rebecca_henderson at link.freedom.com ] [ mailto:rebecca_henderson at link.freedom.com ]rebecca_henderson at link.freedom.com > wrote: Hello, I have a problem with aix clients. Here is my localclient.cfg DEFAULT UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE I have tried HOST=myservername UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE When I make changes to the localclient.cfg it never picks up the changes. Like The IGNORE? Am I doing something wrong? Host name is ok, ip is ok. Any help would be appreciated. Thanks, Becki To unsubscribe from the hobbit list, send an e-mail to [ mailto:hobbit-unsubscribe at hswn.dk ] hobbit-unsubscribe at hswn.dk To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

1 0

[hobbit] hobit problem
by rebecca_henderson＠link.freedom.com 10 Dec '07

10 Dec '07

Ok, thanks -----Original Message----- From: hobbit at hswn.dk [mailto:hobbit at hswn.dk] Sent: Monday, December 10, 2007 1:21 PM To: Rebecca Henderson; hobbit at hswn.dk Subject: RE: [hobbit] hobit problem Importance: Low Actually, I think AIX has problems with the client fetch business. You are better off with configuring these thresholds on the Hobbit server and let it do the calculations. -----Original Message----- From: Rebecca Henderson [mailto:rebecca_henderson at link.freedom.com] Sent: Monday, December 10, 2007 3:13 PM To: hobbit at hswn.dk Subject: RE: [hobbit] hobit problem Well, that's a good question. I would think they would use the client side. How would I know for sure. -----Original Message----- From: hobbit at hswn.dk [mailto:hobbit at hswn.dk] Sent: Monday, December 10, 2007 12:44 PM To: Rebecca Henderson; hobbit at hswn.dk Subject: Re: [hobbit] hobit problem Importance: Low Obvious question, but are the clients configured to use the local config, or are they configured to use the server-side config? On Dec 10, 2007 3:38 PM, Rebecca Henderson <[ mailto:rebecca_henderson at link.freedom.com ] rebecca_henderson at link.freedom.com> wrote: Hello, I have a problem with aix clients. Here is my localclient.cfg DEFAULT UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE I have tried HOST=myservername UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE When I make changes to the localclient.cfg it never picks up the changes. Like The IGNORE? Am I doing something wrong? Host name is ok, ip is ok. Any help would be appreciated. Thanks, Becki To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

1 0

[hobbit] hobit problem
by rebecca_henderson＠link.freedom.com 10 Dec '07

10 Dec '07

Ok, I'll try the --local. Thanks -----Original Message----- From: hobbit at hswn.dk [mailto:hobbit at hswn.dk] Sent: Monday, December 10, 2007 1:17 PM To: Rebecca Henderson; hobbit at hswn.dk Subject: Re: [hobbit] hobit problem Importance: Low The default compile option is to use the server-side config. I'm not sure if it's different for AIX than unix (I don't imagine it would be), but you can check the clientlaunch.cfg file. Look for the [client] section, and if the line that looks like "CMD $HOBBITCLIENTHOME/bin/hobbitclient.sh" doesn't have "--local" appended to it, than it is using the server-side config files. Add --local and restart the hobbit client to switch to using the client-side config file. On Dec 10, 2007 4:12 PM, Rebecca Henderson <[ mailto:rebecca_henderson at link.freedom.com ]rebecca_henderson at link.freedom.com> wrote: Well, that's a good question. I would think they would use the client side. How would I know for sure. -----Original Message----- From: [ mailto:hobbit at hswn.dk ]hobbit at hswn.dk [mailto:[ mailto:hobbit at hswn.dk ]hobbit at hswn.dk] Sent: Monday, December 10, 2007 12:44 PM To: Rebecca Henderson; [ mailto:hobbit at hswn.dk ]hobbit at hswn.dk Subject: Re: [hobbit] hobit problem Importance: Low Obvious question, but are the clients configured to use the local config, or are they configured to use the server-side config? On Dec 10, 2007 3:38 PM, Rebecca Henderson <[ mailto:[ mailto:rebecca_henderson at link.freedom.com ]rebecca_henderson at link.freedom.com ] [ mailto:rebecca_henderson at link.freedom.com ]rebecca_henderson at link.freedom.com > wrote: Hello, I have a problem with aix clients. Here is my localclient.cfg DEFAULT UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE I have tried HOST=myservername UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE When I make changes to the localclient.cfg it never picks up the changes. Like The IGNORE? Am I doing something wrong? Host name is ok, ip is ok. Any help would be appreciated. Thanks, Becki To unsubscribe from the hobbit list, send an e-mail to [ mailto:hobbit-unsubscribe at hswn.dk ] hobbit-unsubscribe at hswn.dk

1 0

[hobbit] hobit problem
by rebecca_henderson＠link.freedom.com 10 Dec '07

10 Dec '07

I'm thinking that if there is an entry in the hobbit-client-config File on the server then it would be server side. I am new at this so I apologize if my questions seem elementary. Thanks! -----Original Message----- From: hobbit at hswn.dk [mailto:hobbit at hswn.dk] Sent: Monday, December 10, 2007 12:44 PM To: Rebecca Henderson; hobbit at hswn.dk Subject: Re: [hobbit] hobit problem Importance: Low Obvious question, but are the clients configured to use the local config, or are they configured to use the server-side config? On Dec 10, 2007 3:38 PM, Rebecca Henderson <[ mailto:rebecca_henderson at link.freedom.com ] rebecca_henderson at link.freedom.com> wrote: Hello, I have a problem with aix clients. Here is my localclient.cfg DEFAULT UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE I have tried HOST=myservername UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE When I make changes to the localclient.cfg it never picks up the changes. Like The IGNORE? Am I doing something wrong? Host name is ok, ip is ok. Any help would be appreciated. Thanks, Becki

1 0

[hobbit] hobit problem
by rebecca_henderson＠link.freedom.com 10 Dec '07

10 Dec '07

Well, that's a good question. I would think they would use the client side. How would I know for sure. -----Original Message----- From: hobbit at hswn.dk [mailto:hobbit at hswn.dk] Sent: Monday, December 10, 2007 12:44 PM To: Rebecca Henderson; hobbit at hswn.dk Subject: Re: [hobbit] hobit problem Importance: Low Obvious question, but are the clients configured to use the local config, or are they configured to use the server-side config? On Dec 10, 2007 3:38 PM, Rebecca Henderson <[ mailto:rebecca_henderson at link.freedom.com ] rebecca_henderson at link.freedom.com> wrote: Hello, I have a problem with aix clients. Here is my localclient.cfg DEFAULT UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE I have tried HOST=myservername UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE When I make changes to the localclient.cfg it never picks up the changes. Like The IGNORE? Am I doing something wrong? Host name is ok, ip is ok. Any help would be appreciated. Thanks, Becki

3 2

hobit problem
by rebecca_henderson＠link.freedom.com 10 Dec '07

10 Dec '07

Hello, I have a problem with aix clients. Here is my localclient.cfg DEFAULT UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE I have tried HOST=myservername UP 1h LOAD 5.0 10.0 DISK * 97 99 MEMPHYS 100 101 MEMSWAP 50 80 SWAP 70 90 MEMACT 90 97 DISK /var IGNORE When I make changes to the localclient.cfg it never picks up the changes. Like The IGNORE? Am I doing something wrong? Host name is ok, ip is ok. Any help would be appreciated. Thanks, Becki

2 1

alarm software (sms/mail/call/...)
by stef.coene＠docum.org 10 Dec '07

10 Dec '07

Hi, We are currently using autodialer software that is capable of sending SMS and calling (with prerecorded messages) if there is an alarm. When the first person is not responding within 1 minute, a new SMS is send. After 3 times, the next person is tried. And so on. An alarm can be acknowledged by SMS or calling to a special number and entering a code. The problem is that this setup is not flexible. The only way to configure this software (running on windows) is logging in to the box. The only way to send an alarm is via a snmp trap. So I want to replace this box to a more setup-friendly (if possible open source) solution. A google search was not very helpfull, so do you hobbiters have an idea for software that I can use? Stef

2 1

webpage does not show up.
by yong.jiao＠sjrb.ca 08 Dec '07

08 Dec '07

Hi Folks, new to this list. right after hobbit installation on RHEL 4, clicking any links/face icons on http://server/hobbit/ ends up with 404 "page cannot be found" any idea ? Thanks ! Yong

5 4