- Xymon - Xymon mailman web

Problem with HP-UX 11.11 ld error
by rleon＠racenter.com 05 Dec '06

05 Dec '06

do_rrd.o ../lib/libbbgen.a -L/opt/rrd/lib -lrrd -L/usr/local/lib -lpng -L/usr/local/lib -lpcre -lnsl /usr/ccs/bin/ld: (Warning) At least one PA 2.0 object file (hobbitd_rrd.o) was detected. The linked output may not run on a PA 1.x system. /usr/ccs/bin/ld: Unrecognized argument: +init /usr/ccs/bin/ld: Usage: /usr/ccs/bin/ld [options] [flags] files collect2: ld returned 1 exit status gmake[1]: *** [hobbitd_rrd] Error 1 gmake[1]: Leaving directory `/home/bbnet/hobbit-4.2.0/hobbitd' gmake: *** [hobbitd-build] Error 2 root at baclaw:/home/bbnet/hobbit-4.2.0#

1 0

A little off topic
by shea_greg＠emc.com 05 Dec '06

05 Dec '06

Hi all, I've followed the port monitoring threads looking for a solution and while there wasn't one in the list I thought I would ask, because you never know. Is anybody monitoring UDP ports and reporting the data to Hobbit? Anyone have any ideas? I've looked at a number of things already, just want to see if someone else is doing something similar. Thanks -Grs- Gregory R Shea EMC Corporation

1 0

apache graph
by stef.coene＠docum.org 05 Dec '06

05 Dec '06

Hi, I tried to get the apache graphs working. Everything is working, they show up on the trends page, I can see the apache.rrd file and it is upated each 5 minutes. However, there are no updates, so the graph shows NaNQ. This is for an apache server, part of an oracle mid tier installation. If you know oracle, it is possible they changed the layout of the server-status page. I attached the server-status page. Can somebody checks the layout of this page or has a solution for my problem ? Stef

3 5

[hobbit] NCV_testname= specification
by Thomas.Kern＠hq.doe.gov 05 Dec '06

05 Dec '06

Sorry, folks, that wasn't meant for the whole list. I need to read the From/To lines a bit more closely. /Thomas Kern /301-903-2211 > -----Original Message----- > From: Kern, Thomas [mailto:Thomas.Kern at hq.doe.gov] > Sent: Tuesday, December 05, 2006 3:19 PM > To: hobbit at hswn.dk > Subject: RE: [hobbit] NCV_testname= specification >

1 0

[hobbit] NCV_testname= specification
by Thomas.Kern＠hq.doe.gov 05 Dec '06

05 Dec '06

I don't know yet. I can't get my hobbit admin to acknowledge any of my email or voicemail about hobbit. She is avoiding me. I think something can be done because of the special metrics disk report. It shows all of the disk data in a single chart rather than the 4/chart that is standard in the disk and trend pages. I also looked at the hobbit server source code about the vmstat trend chart. It is a nice 3 color chart for SYS, USR, IDLE cpu utilization. The backend code is the only process that deals with the vmstat section of the client-data stream and there is only the cpu section is used. I coded a HOBVMSTT exec to build a [vmstat] section from the VM Performance ToolKit data. It got automatically sent to the hobbit server and in the trends page a placeholder graph appeared (nice magic). Unfortunately the hobbit server has permissions issues with every new graph so all I get is the red-x. Once I get these things to graph nicely, I will package them up with a little write-up as a SAMPLE extension to Hobbit/VM for those sites that also use VMPTK. /Thomas Kern /301-903-2211 > -----Original Message----- > From: Rich Smrcina [mailto:rsmrcina at wi.rr.com] > Sent: Tuesday, December 05, 2006 2:58 PM > To: hobbit at hswn.dk > Subject: Re: [hobbit] NCV_testname= specification > > I was getting ready to ask the same question for a different reason > (thanks Thomas). Now the follow-on, how do you graph this without > having to specify each dataset name individually? > > Charles Goyard wrote: > > Kern, Thomas wrote : > >> Can I code NCV_LPAR="*:GAUGE" instead of > >> NCV_LPAR="LEGACY:GAUGE,ZOSEPROD:GAUGE,ZOSPROD:GAUGE,Total:GAUGE" ? > > > > Yes, you can. > > > > -- > Rich Smrcina > VM Assist, Inc. > Phone: 414-491-6001 > Ans Service: 360-715-2467 > rich.smrcina at vmassist.com > > Catch the WAVV! http://www.wavv.org > WAVV 2007 - Green Bay, WI - May 18-22, 2007 > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > > >

1 0

NCV_testname= specification
by Thomas.Kern＠hq.doe.gov 05 Dec '06

05 Dec '06

Can the wildcard be used to dynamically define all of the data? I would like avoid changing the central hobbit config (not under my control) every time one of the z/OS sysprogs decides to fire up a test LPAR. My test sends this status msg. Tue Dec 5 10:40:25 EST 2006 General Processor LPAR utilization exceeds threshold: 95 % LEGACY:1.7 ZOSEPROD:94.3 ZOSPROD:2.9 Total:98.9 Can I code NCV_LPAR="*:GAUGE" instead of NCV_LPAR="LEGACY:GAUGE,ZOSEPROD:GAUGE,ZOSPROD:GAUGE,Total:GAUGE" ? /Thomas Kern >Henrik Stoerner wrote: > >>On Thu, Oct 12, 2006 at 09:45:10PM -0400, Galen Johnson wrote: >> >>Active Sessions: 2 >>Disconnected Sessions: 14 >>Group1 Users: 7 >>Group2 Users: 9 >> >>There needs to be a way to define a data block within a status message and have NCV >>graphing ignore everything outside of it... >> >Setup the NCV_foo setting like this: > >NCV_foo="ActiveSessions:GAUGE,DisconnectedSessions:GAUGE,Group1Users:GA UGE, >Group2Users:GAUGE,*:NONE" > >The "*:NONE" makes the NCV handler ignore everything except the datasets >explicitly listed. > >Note: you'll have to delete the current rrd file when making this kind >of change. > >Regards, >Henrik

3 2

[hobbit] Ext scripts not working from an include file?
by Ben_Boulanger＠cable.comcast.com 05 Dec '06

05 Dec '06

Wow... I'm incredibly stupid for not realizing that! I get it. Thank you Charles. Of course, I'm parsing the file which has nothing in it. Please delete all emails from me on this subject so that I can hide my shame. -----Original Message----- Maybe you should modify your scripts so they use "bbhostgrep" utility (in bin/) instead of directly grepping the bb-hosts file.

1 0

Ext scripts not working from an include file?
by Ben_Boulanger＠cable.comcast.com 05 Dec '06

05 Dec '06

Hello, First - thank you for Hobbit, It's excellent and I personally love it. The real reason for the email: I've got a bunch of ext scripts that I converted from big brother and they seem to work fine from the bb-hosts file, but they don't operate from the include file. Here's an example of a line that works in the bb-hosts but not in the include: 192.168.1.1 Hostname_of_Box # snmp chassis ntsvcs ipedge clustat drivechk pcanywhere strmstat snapchk verchk filesizes driveerrors The only thing I would get is conn info and trends. Anyone encounter this before? Thanks, Ben Boulanger

2 1

Ext scripts not working from an include file?
by Ben_Boulanger＠cable.comcast.com 05 Dec '06

05 Dec '06

Hello, First - thank you for Hobbit, It's excellent and I personally love it. The real reason for the email: I've got a bunch of ext scripts that I converted from big brother and they seem to work fine from the bb-hosts file, but they don't operate from the include file. Here's an example of a line that works in the bb-hosts but not in the include: 192.168.1.1 Hostname_of_Box # snmp chassis ntsvcs ipedge clustat drivechk pcanywhere strmstat snapchk verchk filesizes driveerrors The only thing I would get is conn info and trends. Anyone encounter this before? Thanks, Ben Boulanger

1 0

Regex help with disk mount points
by shea_greg＠emc.com 05 Dec '06

05 Dec '06

Hi all, I'm pulling my hair out on what should be a straight forward regex but it's not working. I have a ton of database partitions that the client group doesn't care about so I'm trying to create an entry in the hobbit-clients.cfg with the disk values greater than 100. Here's my entry: DISK "%^/tidw.*" 102 102 With the disk mount points being something like: /tidwiwdev_db_data01 /tidwiwdev_db_data02 /tidwiwdev_db_data03 /tidwiwdev_db_data04 /tidwiwdev_db_data05 ... etc. /tidwiwapp_db_app01 /tidwiwapp_db_app02 /tidwiwapp_db_app03 /tidwiwapp_db_app04 /tidwiwapp_db_app05 ... etc. What am I not doing correctly?? Thanks -Grs- Gregory R Shea EMC Corporation

2 2