- Xymon - Xymon mailman web

AW: [hobbit] no purple backround page
by lehnert＠adtech.de 03 May '06

03 May '06

oh, I think I found it in "hobbitserver.cfg". I changed: ALERTCOLORS="red,yellow,purple" # Colors that may trigger an alert message OKCOLORS="green,blue,clear" # Colors that may trigger a recovery message into: ALERTCOLORS="red,purple" # Colors that may trigger an alert message OKCOLORS="green,yellow,blue,clear" # Colors that may trigger a recovery message thanks, Pascal -----Ursprüngliche Nachricht----- Von: Pascal Lehnert Gesendet: Mittwoch, 3. Mai 2006 17:39 An: 'hobbit at hswn.dk' Betreff: AW: [hobbit] no purple backround page ok, but we did not disable purple propagation (no option like NOPROPPURPLE in bb-hosts). Is it maybe that the yellow color has a higher prio. than purple? thank you, Pascal -----Ursprüngliche Nachricht----- Von: Henrik Stoerner [mailto:henrik at hswn.dk] Gesendet: Mittwoch, 3. Mai 2006 17:25 An: hobbit at hswn.dk Betreff: Re: [hobbit] no purple backround page On Wed, May 03, 2006 at 03:49:19PM +0200, lehnert at adtech.de wrote: > we are trying the latetst hobbit release on our test-system and it seems to work fine so far. > The only problem we have, is that when a host gets "purple" because of a stoped service on that host, > the background color does not change to purple, like the old BB did before. > But this is a very important funktion for us. What can we do? If the status is purple, then the background color should also change to purple - unless there's another status on the page that is yellow or red, or purple propagation has been disabled in the host configuration (the NOPROPPURPLE setting in bb-hosts). Henrik To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

2 1

AW: [hobbit] no purple backround page
by lehnert＠adtech.de 03 May '06

03 May '06

ok, but we did not disable purple propagation (no option like NOPROPPURPLE in bb-hosts). Is it maybe that the yellow color has a higher prio. than purple? thank you, Pascal -----Ursprüngliche Nachricht----- Von: Henrik Stoerner [mailto:henrik at hswn.dk] Gesendet: Mittwoch, 3. Mai 2006 17:25 An: hobbit at hswn.dk Betreff: Re: [hobbit] no purple backround page On Wed, May 03, 2006 at 03:49:19PM +0200, lehnert at adtech.de wrote: > we are trying the latetst hobbit release on our test-system and it seems to work fine so far. > The only problem we have, is that when a host gets "purple" because of a stoped service on that host, > the background color does not change to purple, like the old BB did before. > But this is a very important funktion for us. What can we do? If the status is purple, then the background color should also change to purple - unless there's another status on the page that is yellow or red, or purple propagation has been disabled in the host configuration (the NOPROPPURPLE setting in bb-hosts). Henrik To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

3 2

[hobbit] PDF reporting [news] ! First part
by Mark.Deiss＠acs-inc.com 03 May '06

03 May '06

Cool. I wrote standalone scripts in similar vein to generate pdf reports for BS15000/ISO90000 capacity reports. The scripts generate the png graph files and then incorporates some html files to build the final pdf file using htmldoc software package (the non-commercial version). In our case, these are meant to be separate reports and are not linked into the hobbit web pages. One thing that is a bit vexying is configuring rrdtool commands to insert threshold lines and tailor the graph legends. The rrdtool command syntax (not hobbit) changes across releases so if anyone is fooling around in these areas, caveat emptor. I maintain multiple releases of rrdtool sets and go back and forth between the versions trying to get particular features. Generating legends that include not only the minimum and maximum graphed value, but also the last graphed value. Something that management likes to see. Also for the disk/filesystem utilization percentages, also including the allocated disk amount in gigabytes. Getting clean auto-formatting for the legends is a bear. -----Original Message----- From: thomas.seglard.enata at cnp.fr [mailto:thomas.seglard.enata at cnp.fr] Sent: Tuesday, May 02, 2006 11:21 AM To: hobbit at hswn.dk Subject: [hobbit] PDF reporting [news] ! First part Hello, I got very good feedbacks on the reports. Thank you for these ! Now, I'm going to explain how it works. You got two parts. On one hand, some shell scripts will generate the rrd graphs and save them as PNG. In other hand, a php page will do the reports with the (GREAT) help of the libfpdf. Before I go further, I want to say that I created a directory called 'pdf' into @HOBBITSERVERHOME/www/ In addition, I make an 'images', 'graphrrd', 'export' directories. In conclusion, I got the 'pdf' directory organized like this : [hobbit at psi200 pdf]$ ls -al total 164 drwxr-xr-x 6 hobbit hobbit 4096 mai 2 14:52 . drwxr-xr-x 30 hobbit hobbit 4096 mai 2 15:25 .. drwxr-xr-x 5 hobbit hobbit 4096 avr 30 23:59 export drwxrwxr-x 157 hobbit hobbit 4096 avr 28 19:20 graphrrd drwxrwxr-x 2 hobbit hobbit 4096 mar 22 18:31 images -rwxrwxr-x 1 hobbit hobbit 5251 mar 22 15:52 pdf.php -rwxrwxr-x 1 hobbit hobbit 52241 avr 21 19:53 rapport.php -rwxrwxr-x 1 hobbit hobbit 11125 avr 11 16:17 rapportredac.php -rwxrwxr-x 1 hobbit hobbit 7459 avr 10 15:31 rapports_annuels.php -rwxrwxr-x 1 hobbit hobbit 8814 avr 10 15:30 rapports_mensuels.php drwxrwxr-x 2 hobbit hobbit 4096 mai 2 12:34 scripts export : directory where all reports generated automatically go. graphrrd : directory where all PNG graphs generated automatically go. images : directory where all images to include in the pdf go. I'm giving you some images in images.zip scripts : directory to stock scripts which generate the PNG graphs. Ok, let's go ! 1) first part : shell scripts (rrdscripts.zip). Decompress the scripts into your 'pdf' directory and edit them to modify the destination of PNGs graphs. Once done, launch master.sh and look at the results. For one server, you must have 4 graphs BY test. Actually, I'm graphing 6 tests - cputil, load, memory, iowait, network (don't work for linux at the moment !!) and run-queue. You can add more tests if you want ! For example, you will have : graphrrd/myserver/ load.myserver-[day/week/month/year].png mem.myserver-[day/week/month/year].png ... Now, you can do a cron to launch master.sh every hour to update your graphs. Thanks to ED (ed.zehome.com) for his site and his explanation of rrdtool. I used examples from his site into the scripts... 2) Second part, the php pages (pdfreports.zip). Put these files directly into the pdf directory. You have five files : - pdf.php --> contains the main form with hobbit's look ! You may add this page to your hobbit's menu. Simply type in the text field a server name and got your *beautiful* report :) - rapport.php --> contains all the php code. So, the file pdf.php calls this file when a name is submitted. Within this script you can define - rapportredac.php --> contains a form with several textareas. You have to put a server name, check a box if the server is overloaded, underloaded or 'normally loaded'. Then, all text in the textareas will go under graphs in the pdf report. You can easily build analysis for your boss or team... Like pdf.php, this page calls rapport.php. - rapports_mensuels (monthly) and rapports_annuels (annual - sorry for french) : you can execute these scripts to have reports - for all servers - automatically generated and put into a directory. Like 'master.sh' you can do a cron to have reports each end of month. These two scripts even check the last day of month and send a mail when reports are generated. If all is correct you will have a pdf report with your graphs in it when you click on 'rapport !' on the pdf.php page. That's all ! You have to edit them by hand to modify and adapt to your configuration. I'm sorry the code isn't very clean at all ! Moreover, you will have a lot of french text in the files. I'm beginning to rewrite comments into english. Feel free to make comments and/or modifications to the scripts. I hope, these reports will satisfy your needs. I'm sorry for the shorts explanations but I got another project which take all my time... So, I will try my best to answer questions, if you have some ! Best regards, Thomas Seglard Ce message (et toutes ses pieces jointes eventuelles) est confidentiel et etabli a l'intention exclusive de ses destinataires. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer l'integrite de ce message, CNP Assurances et ses filiales declinent toute responsabilite au titre de ce message, s'il a ete altere, deforme ou falsifie. ***** This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration. Neither CNP Assurances nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified.

1 0

no purple backround page
by lehnert＠adtech.de 03 May '06

03 May '06

Hi, we are trying the latetst hobbit release on our test-system and it seems to work fine so far. The only problem we have, is that when a host gets "purple" because of a stoped service on that host, the background color does not change to purple, like the old BB did before. But this is a very important funktion for us. What can we do? many thanks, Pascal Lehnert

2 1

Changing the frequency of a specific test
by ian.marsh＠hants.gov.uk 03 May '06

03 May '06

We're currently experiencing a problem with httpd on one of our servers that isn't being caught by hobbit. Is it possible to specify a custom test interval for just one test on one server? The hope is that it'll stand a better chance of catching the problem if it runs, say, every minute rather than every 5 minutes. Thank you, Ian Marsh IT Services, Network Services Hampshire County Council Telephone: 01962 845235 HPSN: 200 5235 email: ian.marsh at hants.gov.uk

6 12

[hobbit] RE [hobbit] vmstat graph on Red Hat Linux release 9 graphing wrong data 8-(
by crlangfo＠ugs.com 03 May '06

03 May '06

The -linux22 fixed the problem. Thanks!! Ken Langford, -----Original Message----- From: thomas.seglard.enata at cnp.fr [mailto:thomas.seglard.enata at cnp.fr] Sent: Tuesday, May 02, 2006 2:07 PM To: hobbit at hswn.dk Subject: [hobbit] RE [hobbit] vmstat graph on Red Hat Linux release 9 graphing wrong data 8-( Hello, can you try to launch your client with the --linux22 (or maybe the --rhel3) flag ? Sincerly, Thomas Seglard "Langford, Kenneth" <crlangfo at ugs.com> a écrit sur 02/05/2006 19:20:12 : > All, > > I have several Red Hat Linux release 9 systems that I have to maintain > that I am currently monitoring with hobbit. > The vmstat graphs on my other linux system work perfectly but for some > reason the Red Hat 9 systems are graphing the wrong columns of data. The > graphs show the system cs data as user, cpu us as system and cpu sy as > idle. Any ideas why the data is off by one column?????? What do I need > to do to get hobbit to graph the right columns???? > > Ken, > > # uname -a > Linux cili3s02.net.plm.eds.com 2.4.20-30.9 #1 Wed Feb 4 20:44:26 EST > 2004 i686 i686 i386 GNU/Linux > # vmstat 100 3 > procs memory swap io system > cpu > r b w swpd free buff cache si so bi bo in cs us > sy id > 4 0 0 988300 23276 149388 1121652 1 0 1 0 0 0 > 0 0 1 > 4 0 0 988300 21400 149424 1122548 0 0 0 30 347 715 > 9 8 83 > 1 0 0 988300 21360 149476 1122632 0 0 0 17 229 443 > 7 2 91 > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > Ce message (et toutes ses pieces jointes eventuelles) est confidentiel et etabli a l'intention exclusive de ses destinataires. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer l'integrite de ce message, CNP Assurances et ses filiales declinent toute responsabilite au titre de ce message, s'il a ete altere, deforme ou falsifie. ***** This message and any attachments (the "message") are confidential and intended solely for the addressees. Any unauthorised use or dissemination is prohibited. E-mails are susceptible to alteration. Neither CNP Assurances nor any of its subsidiaries or affiliates shall be liable for the message if altered, changed or falsified.

1 0

TIME and localtime in hobbitd-alerts.cfg
by Dominique.Frise＠unil.ch 03 May '06

03 May '06

Hi, We have problem setting TIME in our rules. Example of a rule for excluding alerts for the ldap service between 05:00 and 05:30 AM: HOST=uldns1,uldns2 SERVICE=ldap TIME=*:0500:0530 In notifications.log we see: Wed May 3 03:02:40 2006 uldns1.ldap (1.2.3.4) 0797852006 1146625310 0 Wed May 3 03:02:40 2006 uldns2.ldap (1.2.3.4) mister.test at example.com 1146625360 0 This seems to indicate that Hobbit treats the TIME as GMT (2 hours shift because of summertime) but we use CEST on the server (TZ=Europe/Zurich) How can we solve this? Dominique UNIL - University of Lausanne

1 1

hobbit gentoo ebuild?
by kolbjorn.barmen＠uninett.no 02 May '06

02 May '06

Before I make them myself, are there ebuilds for hobbit server and hobbit client out there already? -- Kolbjørn Barmen UNINETT Driftsenter

2 3

vmstat graph on Red Hat Linux release 9 graphing wrong data 8-(
by crlangfo＠ugs.com 02 May '06

02 May '06

All, I have several Red Hat Linux release 9 systems that I have to maintain that I am currently monitoring with hobbit. The vmstat graphs on my other linux system work perfectly but for some reason the Red Hat 9 systems are graphing the wrong columns of data. The graphs show the system cs data as user, cpu us as system and cpu sy as idle. Any ideas why the data is off by one column?????? What do I need to do to get hobbit to graph the right columns???? Ken, # uname -a Linux cili3s02.net.plm.eds.com 2.4.20-30.9 #1 Wed Feb 4 20:44:26 EST 2004 i686 i686 i386 GNU/Linux # vmstat 100 3 procs memory swap io system cpu r b w swpd free buff cache si so bi bo in cs us sy id 4 0 0 988300 23276 149388 1121652 1 0 1 0 0 0 0 0 1 4 0 0 988300 21400 149424 1122548 0 0 0 30 347 715 9 8 83 1 0 0 988300 21360 149476 1122632 0 0 0 17 229 443 7 2 91

2 1

Bb-hostedit
by Stewart_Larsen＠doh.state.fl.us 02 May '06

02 May '06

I am unable to fin dbb-hostedit on deadcat and googling finds some discussion about it, but I can't find where to download it. Is it still available? -----Original Message----- file is maintained mostly by the (non-unix-savvy) staff here, using the bb-hostedit CGI script, and I'd rather not have them have to keep track of which host needed which NET tag, etc.

3 2