- Xymon - Xymon mailman web

Monitorscripts
by peirce＠ofir.dk 30 Jan '06

30 Jan '06

An HTML attachment was scrubbed... URL: <http://lists.xymon.com/pipermail/xymon/attachments/20060130/67a16545/attach…>

2 1

[hobbit] Still problems with writing client data while running several clients
by Schrittenlocher＠rz.uni-frankfurt.de 30 Jan '06

30 Jan '06

Hi, as the problem persists and there were no replies to my last message (except for Matthias, thanks), I try again: Is there any way to synchronize several instances of hobbit client on one machine with delay so that each sends client data to the server at a different point of time so that the server is able to write those data? Starting those instances with delay does help accidently but not always. Any help or ideas are welcome! Rolf The details (My old message): we are running 1 to 3 clients on each host, one for $hostname and one for each virtual host defined on the machine in order to get client data like disk, cpu, etc. for $hostname and for each virtual host. Each client is started using $HOBBITCLIENTHOME/bin/hobbitlaunch --config=$HOBBITCLIENTHOME/etc/clientlaunch.${MACHINE}.cfg --log=$HOBBITCLIENTHOME/logs/clientlaunch.${MACHINE}.log --pidfile=$HOBBITCLIENTHOME/logs/clientlaunch.${MACHINE}.pid Now I have the problem that client data of one or both clients is neglected by the server. In rrd-data.log it shows: 2006-01-18 13:03:40 RRD error updating /pica/ffm/com/sys/hobbit/hobbit/data/rrd/lbscgi2/netstat.rrd from 141.2.164.215: illegal attempt to update using time 1137585820 when last update time is 1137585820 (minimum one second step) In rrd-status.log are similar entries like 2006-01-18 12:48:38 RRD error updating /pica/ffm/com/sys/hobbit/hobbit/data/rrd/lbscgi2/memory.real.rrd from 141.2.164.215: illegal attempt to update using time 1137584918 when last update time is 1137584918 (minimum one second step) The client data (disk, etc) for both becomes purple in bb.html. Date for both clients is stored (sometimes) correctly: hobbit/hobbit/data/rrd/otter -rw-r--r-- 1 bb prod 19576 Jan 18 12:43 memory.real.rrd hobbit/hobbit/data/rrd/lbscgi2 -rw-r--r-- 1 bb prod 19576 Jan 18 12:58 memory.real.rrd I tried starting the clients with some seconds difference, that helps for a certain time and then the problem reappears. What can I do? kind regards Rolf -- Mit freundlichen Gruessen Rolf Schrittenlocher HRZ/BDV, Senckenberganlage 31, 60054 Frankfurt Tel: (49) 69 - 798 28908 Fax: (49) 69 798 2881 LBS: lbs-f at mlist.uni-frankfurt.de Persoenlich: schritte at rz.uni-frankfurt.de To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

1 0

[hobbit] Latest Snapshot
by fduranti＠q8.it 30 Jan '06

30 Jan '06

Hi Henrik, Thanks for the good work!! I've downloaded the snapshot but I cannot use it ... I've manually changed the hobbitnk.cfg file to put an host that exists in my configuration but it seems that nkedit cannot get the configuration (it didn't find that host/service) and if I try to insert anything i get an Internal Error from apache. In the error_log i get: Fri Jan 27 11:57:54 2006] [error] [client 10.90.24.45] Premature end of script headers: hobbit-nkedit.sh, referer: I've also one question (and possibly one request if it can be implemented)... It's possible to create different configuration file for different group ? Here I've some groups that are monitoring various servers/services (windows server, network equipment, Web Logic Server and Apache Web Server) and it can be really nice to have them go to different NK Page (configuration) each one monitoring the objects they really need to check.... I'm also trying to create a comprehensive hobbit configuration program that can edit all the files in the hobbit configuration (hosts, alert, client, services, graphs, etc.). My unix programming skill are a bit old so I'm developing it in .NET for windows (also because some of the user here that can need to modify the configuration are windows people that know nothing about telnet or ssh or vi :P). The interface will be a MDI interface with one child-window for each configuration file and it will be simple to include in the program new configuration file of others addon (as the snmp or bb-msgs and so on). At the moment I'm trying to understand how to get/put the file on the hobbit machine and the simplest one is via ftp... I think I can get the file also via the bbmessage.cgi but then I've to get via bbmessage.cgi and put with ftp ... Continue the good work! Thanks Francesco

1 0

bb-disk_by_fs.sh
by iqbala-hobbit＠qwestip.net 29 Jan '06

29 Jan '06

Hi All Has anyone used bb-disk_by_fs.sh with BB client? I am trying to find out how it will work with HOBBIT? There are few things I am concern about. 1. How will I manage alerts per partition which this script offers? 2. How will the graph work? Thanks for any feedbacks. I guess I could always try it myself on a test system if there is no feedback already. -- Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu "It is not the strongest of the species that survives, not the most intelligent, but the one most responsive to change." - Charles Darwin

2 2

hobbit w/ daemontools
by iqbala-hobbit＠qwestip.net 29 Jan '06

29 Jan '06

Hi All I am looking for a daemontools script for hobbit server and hobbit client. Has anyone setup one? Thanks -- Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu "..there are two kinds of people: those who work and those who take the credit...try to be in the first group;...less competition there." - Indira Gandhi

1 0

Installing Hobbit, but have some unresolved conflicts with SLES v9 SP3
by mark_t_regan＠yahoo.com 29 Jan '06

29 Jan '06

Greetings, this is my first post to the list. I'm installing Hobbit on a new Novell SUSE LINUX Enterprise Server (SLES) v9, w/SP3, but I'm getting some unresolved conflicts when I try to install the rpm. The conflicts are: libcrypto.so.5 liblber-2.2.so.7 libldap-2.2.so.7 librrd.so.0 libssl.so.5 Where can I find these packages since they didn't come with SLES? Thanks. -- Mark Regan, K8MTR Mainframe Systems Programmer U.S. Navy Retired, CTO1

3 2

[hobbit] help with setting up pager rule
by smith.js.8＠pg.com 27 Jan '06

27 Jan '06

Ah, my bad. Thanks! Scott Larry Barber <lebarber at gmail.com> To: hobbit at hswn.dk cc: 01/27/2006 03:25 PM Subject: Re: [hobbit] help with setting up pager rule Please respond to hobbit You have the TIME filter backwards, it needs to be W:0000:0800,W:1700:2400,06:0000:2400, the way you have it it will only pass alerts on weekdays from 8:00 to 5:00. Thanks, Larry Barber On 1/27/06, smith.js.8 at pg.com <smith.js.8 at pg.com> wrote: I'm having problems getting a pager rule to work. What I want is to get paged for any conn (connection) that is down more than 10 minutes, but not during "normal business hours" (ie, M-F 8a-5p). Here is what I have: HOST=%.*\.(na|internal)\.pg\.com SERVICE=conn TIME=W:0800:1700 DURATION>10 SCRIPT /usr/local/bin/skytel 800####### FORMAT=sms Here's what happens. I get paged during the middle of the day when a system goes down. If I run the rule through the "test" mode, then it says it fails on the duration rule. So if I remove the duration rule and test again, then it says it fails on the time rule. But, as I said, I'm getting pages in the middle of the day (when we're doing maintenance). Thoughts? Am I writing this rule correctly? To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

1 0

help with setting up pager rule
by smith.js.8＠pg.com 27 Jan '06

27 Jan '06

I'm having problems getting a pager rule to work. What I want is to get paged for any conn (connection) that is down more than 10 minutes, but not during "normal business hours" (ie, M-F 8a-5p). Here is what I have: HOST=%.*\.(na|internal)\.pg\.com SERVICE=conn TIME=W:0800:1700 DURATION>10 SCRIPT /usr/local/bin/skytel 800####### FORMAT=sms Here's what happens. I get paged during the middle of the day when a system goes down. If I run the rule through the "test" mode, then it says it fails on the duration rule. So if I remove the duration rule and test again, then it says it fails on the time rule. But, as I said, I'm getting pages in the middle of the day (when we're doing maintenance). Thoughts? Am I writing this rule correctly? Scott _______________ Scott Smith 513-634-9847

2 1

Latest Snapshot
by dunne＠accuweather.com 27 Jan '06

27 Jan '06

Greetings, I downloaded the latest snapshot and am curious if there is any documentation for the new "Critical Systems" enhancements. The new features look perfect for our organization and I'd love to start testing. Thanks in advance. Mike Michael Dunne Systems Support Specialist AccuWeather, Inc. 814-237-0309 Ext. 7661 ~Deliberation, n.: The act of examining one's bread to determine which side it is buttered on. (Ambrose Bierce, "The Devil's Dictionary")~

3 4

Alert TIME problem
by whk2＠cornell.edu 27 Jan '06

27 Jan '06

Hi Everyone, I just switched from BB a couple of weeks ago. We are running version 4.1.2p1 on RHLinux AS v3. I am aware that the DURATION parameter does not work. However, I am also having a TIME parameter problem. I want to run two different alerts. One with the REPEAT setting and one without all based upon the TIME. Below is how I have the settings: HOST=xxxx.cornell.edu MAIL xxx at xxx.cornell.edu DURATION>=5 COLOR=red REPEAT=60 RECOVERED TIME=*:0700:2100 MAIL xxx at xxx.cornell.edu DURATION>=5 COLOR=red RECOVERED TIME=*:2101:0659 However for the alerts that occurred last night I received REPEAT messages all night long. I want to receive any red messages for any category I am monitoring. Does anyone see a problem or know of a TIME work around? If anyone knows of a work around for the DURATION problem I would be most appreciative. Thanks, Bill

1 0