- Xymon - Xymon mailman web

Solaris Xymon WWW index file missing
by Nick＠Pettefar.com 13 Aug '12

13 Aug '12

I have just downloaded, compiled and installed the latest xymon on my Sun T2000 but the web page doesn't work. There is no index.html or any other plain file in the /export/home/xymon/server/www/ directory, should there be? >From /etc/apache2/httpd.conf: Alias http://www.blahblah.com/xymon/ "/export/home/xymon/server/www/" root> ls -l /export/home/xymon/server/www/ drwxr-xr-x 2 xymon xymon 37 Aug 8 18:43 gifs drwxr-xr-x 3 xymon xymon 37 Aug 8 18:43 help drwxr-xr-x 2 xymon xymon 2 Aug 8 18:43 html drwxr-xr-x 2 xymon xymon 8 Aug 8 18:43 menu drwxr-xr-x 2 xymon xymon 2 Aug 8 18:43 notes drwxrwxr-x 2 xymon nobody 2 Aug 8 18:43 rep drwxrwxr-x 2 xymon nobody 2 Aug 8 18:43 snap drwxr-xr-x 2 xymon xymon 2 Aug 8 18:43 wml Regards, Nick Ireland

3 2

Changing update frequency of graphs
by Paul.Jacobs＠lchclearnet.com 10 Aug '12

10 Aug '12

Hi I have a graph showing average service times on SAN disks and it needs updating every minute rather then, the default 5 minutes. I had a stab at modifying the rrddefinitions.cfg file and adding this section :- [diskstat/60] RRA:AVERAGE:0.5:5:576 RRA:AVERAGE:0.5:30:576 RRA:AVERAGE:0.5:120:576 RRA:AVERAGE:0.5:1440:576 My ext script is called diskstat and sends data to the xymon server every minute but the graph is only updating every 5 -rw-r----- 1 xymon xymon 19552 Aug 10 10:16 diskstat-svct,sd580.rrd -rw-r----- 1 xymon xymon 19552 Aug 10 10:23 diskstat-svct,sd581.rrd -rw-r----- 1 xymon xymon 19552 Aug 10 10:22 diskstat-svct,sd582.rrd -rw-r----- 1 xymon xymon 19552 Aug 10 10:24 diskstat-svct,sd583.rrd -rw-r----- 1 xymon xymon 19552 Aug 10 10:23 diskstat-svct,sd584.rrd Any help would be appreciated Paul Jacobs UNIX Systems Administrator, SwapClear Tel: +44 (0)207 426 8289 Email: paul.jacobs at lchclearnet.com<mailto:adam.beresford at lchclearnet.com> [cid:image001.gif at 01CD76E2.384A6AE0] A copy of the LCH.Clearnet e-mail disclaimer can be found at: www.lchclearnet.com/disclaimer/email LCH.Clearnet Limited, Registered Office: Aldgate House, 33 Aldgate High Street, London EC3N 1EA. Recognised as a Clearing House under the Financial Services & Markets Act 2000. Reg in England No.25932. LCH.Clearnet SA, Siège Social, 18 rue du Quatre Septembre, 75002 Paris, Chambre de Compensation conformément au Code Monétaire et Financier.

3 2

Perl client without xymon client. (OPEN)
by oyvind.bjorge＠telenor.com 10 Aug '12

10 Aug '12

Is there anyone that have made a perl module or subroutine for sending to a xymon-server without having to install the xymon client? On some node it is difficult to install a client. Some vendors are very afraid of having things installed on "their" equipment, and the os might be stripped down with no compilers and so on. For sending to xymon I guess all you need is a simple socket connections so I expect that this has been done many times already. Anyone who would like to share? / Øyvind

5 6

Need help with Xymon
by ashwingrwl＠gmail.com 09 Aug '12

09 Aug '12

Hi, I want to install xymon on our Redhat linux 6 box. Could you please give me the steps i need to follow ? Thank you very much for your help on this. Best Regards, Ashwin.

2 1

internal server error after upgrade
by D.Forsyth＠ru.ac.za 09 Aug '12

09 Aug '12

Hi all I'm running FreeBSD 7.4 and used 'portupgrade' to upgrade xymon-server and client today, to 4.3.10 Now, I cannot see any graphs. showgraph.cgi and showgraph.sh never get built and installed. When I click on a graph link I get '500 Internal server error'. Very annoying is that none of the log files is particularly helpful about this! Excerpt from http-error.log [Thu Aug 09 19:55:02 2012] [error] [client 41.145.0.228] .: Can't open @XYMONHOME@/etc/cgioptions.cfg: No such file or directory, referer: http://iwr.ru.ac.za/xymon-cgi/svcstatus.sh?HOST=iwr.ru.ac.za&SERVICE=xymonn… [Thu Aug 09 19:55:02 2012] [error] [client 41.145.0.228] Premature end of script headers: showgraph.sh, referer: http://iwr.ru.ac.za/xymon-cgi/svcstatus.sh?HOST=iwr.ru.ac.za&SERVICE=xymonn… cgioptions.cfg exists and is readable by all in that folder! I regressed rrdtool to 1.2 from 1.4 but it made no difference. I did this because the showgraph build is optional on the DORRD keyword, and I thought maybe it wasn't being detected correctly, but there is no change, showgraph.cgi is still not built. make output includes the symbol RRDTOOL12 instead of 'RRDTOOL'. In my day of messing with this I managed to force showgraph.cgi to be built and I then manually installed it, and that is when 'internal server error' appeared instead of 'page not found'. Any ideas?

2 1

Xymon 4.3.10 - missing patches?
by john.horne＠plymouth.ac.uk 09 Aug '12

09 Aug '12

Hello, I am today working on upgrading our Xymon server from 4.3.7 to 4.3.10. I have several patches applied locally, but a few were reported to the list as possible bugs. In the process of upgrading I am obviously checking to see if the patches have been applied to the supplied 4.3.10 code. It seems that http://lists.xymon.com/archive/2012-April/034285.html has not been applied. Note that this issue occurs in three source files, not just xymonnet.c. Is there any reason why it has not been applied or was is just missed? Thanks, John. -- John Horne Tel: +44 (0)1752 587287 Plymouth University, UK Fax: +44 (0)1752 587001

2 2

Changing the URL
by Venkatesh_S04＠infosys.com 09 Aug '12

09 Aug '12

Hi All , We would like to change the URL from http://XXX.XX.XX.XXX/xymon/xymon.html to http://XXX.XX.XX.XXX/dbatools/xymon.html . Is there a neat and easy way to accomplish this ? Regards, Venkatesh **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***

3 2

WG: Xymon and BBWin: issue with special german characters in MS Windows service names
by christian.becker＠rhein-zeitung.net 09 Aug '12

09 Aug '12

Hello, I would like to ask again about this. I played around a bit with the idea of Torsten, but without success. Does anybody out there have an idea? Best regards Christian CHRISTIAN BECKER System Engineer CSC August-Horch-Strasse 28, 56070 Koblenz, Germany Global Outsourcing Services Central Region | www.csc.com Von: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] Im Auftrag von Becker Christian Gesendet: Dienstag, 26. Juni 2012 11:56 An: bb4 at richter-it.net Cc: Xymon Email List Betreff: Re: [Xymon] Xymon and BBWin: issue with special german characters in MS Windows service names Hi Torsten, thank you for your information. I think, since my Windows servers are running the BBWin client in local mode, the “mechanism” doesn’t use the analsys.cfg (?). Regards Christian CHRISTIAN BECKER System Engineer CSC August-Horch-Strasse 28, 56070 Koblenz, Germany Global Outsourcing Services Central Region | www.csc.com Von: bb4 at richter-it.net [mailto:bb4 at richter-it.net] Gesendet: Dienstag, 26. Juni 2012 11:45 An: Becker Christian Betreff: Re: [Xymon] Xymon and BBWin: issue with special german characters in MS Windows service names Hi Christian, I had a similar problem monitoring ports on a Windows server with german Windows. There I had to escape the special characters since a netstat did not show "LISTEN" but "ABHÖREN". Unfortunately I do not remember what exactly I did but in my analysis.cfg there is now something like this: LOCAL=%[.:]135$ STATE=ABH<99>REN .... So it looks I replaced the 'Ö' with hex 99. I think it was something like unicode but I am not sure. Sorry that I could not be more helpful but I hope I pushed you a little bit in the right direction. Regards Torsten Becker Christian <christian.becker at rhein-zeitung.net> hat am 26. Juni 2012 um 09:55 geschrieben: Hello all, I have a Xymon server running Xymon 4.3.7 on RHEL 6.1. This setup is working fine. Then I have a couple of Windows servers running BBWin 01.2 in local mode with update feature enabled. This is also running fine. During the deeper configuration phase I recognized that I have an issue with the special german characters. I found this when I wanted to include services from one of our MS Exchange servers: we have servers running a german MS Windows Server 2008 R2 Enterprise SP1, together with a german MS Exchange 2010. One of the services is the “MSExchangeMailSubmission”, but this is “just” the service name. I think in Xymon (or better: in BBWin) one has to include the display name of the service one wants to monitor (?). The thing is, that the display name of this specific service is “Microsoft Exchange-Mailübergabe”. That’s it. The special german character “ü” screws up the setup in that way, that this particular service won’t get displayed in my setup. That’s not only a problem with our Exchange servers, but for my understanding it is a problem in the “playing together” between the Xymon and the BBWin setup, or better: it is a problem with the german MS Windows setup. To troubleshoot this thing I changed the locale of my Xymon server from “en_US.utf8” to “LANG=de_DE.UTF-8”, and after that to “LANG=de_DE.iso885915 at euro”, but without any success. I could monitor these specific services as processes, but this is not what I want. Do I need to change something else in my setup. i.e. in my webserver? Any help would be appreciated… Christian CHRISTIAN BECKER System Engineer CSC August-Horch-Strasse 28, 56070 Koblenz, Germany Global Outsourcing Services Central Region | www.csc.com ________________________________ CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose • CSC Deutschland Services GmbH • Registered Office: Abraham-Lincoln-Park 1, 65189 Wiesbaden, Germany • Board of Directors: Gerhard Fercho (Chairman),Thomas Nebe, Peter Schmidt • Registered in Germany: HRB 7574, Wiesbaden

2 1

Can I create a graph as an HTML image?
by john.horne＠plymouth.ac.uk 08 Aug '12

08 Aug '12

Hello, Using Xymon 4.3.7, does anyone know if it is possible to create a graph as an HTML image? That is, so that I can use '<IMG SRC...>' in a web page. I have had a look at 'showgraph.sh', but that seems to create a link to a page which then contains just the graph. I want the graph/image, not a link to it. Even using the '--save' option Our old Big Brother/MRTG system created PNG images of various things (which admittedly was a big drain on the system), and we could then create web pages which simply loaded whatever graphs/images we wanted. I'm now trying to do something similar but using Xymon/RRD. Anyone any ideas about this? (Current thoughts are perhaps to use PHP with rrdgraph to create the image. However, I then have to fiddle with the format of the image unless I can parse the graphs.cfg file.) John. -- John Horne Tel: +44 (0)1752 587287 Plymouth University, UK Fax: +44 (0)1752 587001

3 3

More info about GRAPHS, ::1 and maxgraphs
by joel＠carnat.net 08 Aug '12

08 Aug '12

Hi, I probably have mis-understood but I get weird rendering using "::n" in xymonserver.cfg's GRAPHS directive. I have 6 RRD files, containing a single "temp" value (meaning temperature for that particular disk). I have a graph definition that goes: [snmp_disktemp] FNPATTERN ^snmp_disktemp.(.+).rrd TITLE Disk Temperature YAXIS Deg Celcius -l 0 -E DEF:temp at RRDIDX@=@RRDFN@:temp:AVERAGE COMMENT: COMMENT: Cur\: COMMENT:Min\: COMMENT:Avg\: COMMENT:Max\: \j LINE:temp at RRDIDX@#@COLOR@:disk at RRDIDX@ (@RRDPARAM@) GPRINT:temp at RRDIDX@:LAST:%4.0lf°C GPRINT:temp at RRDIDX@:MIN:%4.0lf°C GPRINT:temp at RRDIDX@:AVERAGE:%4.0lf°C GPRINT:temp at RRDIDX@:MAX:%4.0lf°C\l The whole thing monitors disks temperature from a NAS ; there are 6 disks inside. In "xymonserver.cfg": - if I set GRAPHS="(...),snmp_disktemp,(...)", I get 2 graphs with 3 disks in each graph; - if I set GRAPHS="(...),snmp_disktemp::1,(...)", I get 6 graphs with 1 disk in each graph; - if I set GRAPHS="(...),snmp_disktemp::2,(...)", I get 3 graphs with 2 disk in each graph; - if I set GRAPHS="(...),snmp_disktemp::3,(...)", I get 2 graphs with 3 disk in each graph; - if I set GRAPHS="(...),snmp_disktemp::4,(...)", I get 2 graphs with 3 disk in each graph; - if I set GRAPHS="(...),snmp_disktemp::5,(...)", I get 2 graphs with 3 disk in each graph; - if I set GRAPHS="(...),snmp_disktemp::6,(...)", I get 1 graphs with 6 disk in each graph; If I play with the "&count" parameter of the "showgraph.sh" Web script, the generated graph can have from 1 to 6 disks per graph according to the "count" value. This seem to be independent from the "::x" I set. In "xymon-4.3.9/lib/xymonrrd.c", I found "step = (graphdef->maxgraphs ? graphdef->maxgraphs : 5);" but didn't find where it could be (have been) modified in my cfg files ; to match that "3" default. I have the same kind of weirdness with another set of data (5 RRD files with in/out network values in it). "::1" renders 5 graphs * 1 dataset, "::2" renders 5g*1d, "::3" renders 2g*2d+1g*1d,"::4" renders 2g*2d+1g*1d, "::5" renders 1g*5d. I though "::x" meant "group by x with a default of maxgraphs" but I seem to be wrong. Or there is something not working properly. Can anyone enlighten me? TIA, Jo

1 0