- Xymon - Xymon mailman web

analysis.cfg failed alerting
by josh＠imaginenetworksllc.com 22 Feb '12

22 Feb '12

In client-local.cfg file:`ls -1 /opt/powermonitor-notices/*` On the files column I see green /opt/powermonitor-notices/noticeofpowerfailure.192.168.97.10 Now in the hobbit-clients.cfg (AKA analysis.cfg now) configuration neither of these work FILE /opt/powermonitor-notices/noticeofpowerfailure.192.168.97.10 red noexist FILE noticeofpowerfailure.192.168.97.10 red noexist FILE %noticeofpowerfailure* red noexist Ideally I would like the last one there to work so I don't need to specify the IP and can simply use a regular expression and cover all of them. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373

2 2

mrtg xymon integration problem
by paveltraian＠yahoo.com 22 Feb '12

22 Feb '12

Hi, I have installed Xymon server on a CentOS 6 x64. I wanted to integrate MRTG into it and i got an error. After i add the below lines: # For Xymon integration WorkDir: /var/lib/xymon/rrd LogFormat: rrdtool I get this error: ERROR: could not find RRDs.pm. Use LibAdd: in mrtg.cfg to help mrtg find RRDs.pm The problem is that i don't know where to find RRDs.pm. Regards.

2 2

FW: dbcheck issue
by Venkatesh_S04＠infosys.com 22 Feb '12

22 Feb '12

Hi All , After configuring the dbcheck for SQL Server ,I am only able to view the connection information .The database space report column is not being displaced .Could you please let me know as to how to troubleshoot this issue ? Regards, Venky **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***

1 0

Multi-graphs with subgraphs do not show properly
by Wim.Nelis＠nlr.nl 22 Feb '12

22 Feb '12

Hello, It seems that the combination of multi-graphs with sub-graphs may lead to unexpected results. A local test, with name diskstat, checks some performance measures of disk I/O. (Basically it reads /proc/diskstats on a Linux machine, and dumps the measurements of selected partitions into an RRD, one RRD per partition.) As there is one set of measurements for each partition to monitor, the graphs of diskstat are defined as multi-graphs: In file cgioptions.cfg: CGI_SVC_OPTS=".... -multigraphs=diskstat,diskstat0,diskstat1,diskstat2" As one RRD contains 11 datasets, a number of subgraphs is defined to show all the collected information. As shown above, there are 3 additional graphs to show it all. The various bits of configuration with respect to test diskstat are: xymonserver.cfg: TEST2RRD="....,diskstat" GRAPHS="....,diskstat::1,diskstat0::1,diskstat1::1,diskstat2::1" tasks.cfg: CMD xymond_channel --channel=status .... --extra-tests=diskstat --extra-script=/home/nlr/xymon/server/ext/rrd_status.pl Of course there are graph definitions for diskstat, diskstat0, diskstat1 and diskstat2 in file graphs.cfg. Script rrd_status.pl also adds a line like  to the status message, with N the number of partitions. The layout of the page of test diskstat is correct. It shows the textual output of script rrd_status.pl and the graph diskstat multiple times, once per partition. The trends page is sometimes not as expected. If no TRENDS are defined for the host in file hosts.cfg, and thus no sub-graphs are selected, the trends column will show one diskstat graph per partition, which is what I would expect. However, if the sub-graphs are selected for a host by adding TRENDS:*,diskstat:diskstat|diskstat0|diskstat1|diskstat2 to the entry of that host in hosts.cfg, the multiplicity of one, as defined in variable GRAPHS, does not function any more. For a host with two monitored partitions, the information of both partitions are shown in one graph. Did I miss something in configuring the combination of multi-graphs with sub-graphs or is this an error in Xymon? Btw, we are using Xymon 4.3.7. Kind regards, Wim Nelis. ****************************************************************************************************************** The NLR disclaimer is valid for NLR e-mail messages. This message is only meant for providing information. Nothing in this e-mail message amounts to a contractual or legal commitment on the part of the sender. This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. Sender accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages. ******************************************************************************************************************

1 0

dbcheck issue
by Venkatesh_S04＠infosys.com 22 Feb '12

22 Feb '12

Hi All , After configuring the dbcheck for SQL Server ,I am only able to view the connection information .The database space report column is not being displaced .Could you please let me know as to how to troubleshoot this issue ? Regards, Venky [cid:image003.png at 01CCF161.456BB4B0] **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***

1 0

disable Oversize data
by martin.flemming＠desy.de 21 Feb '12

21 Feb '12

Hi ! Is there any other chance to prevent the warning from xymond e.g. Latest error messages: Oversize data/client msg from 131.169.71.236 truncated (n=1356805, limit 1280000) First line: bird036|linux|linux| .. apart from permanently to raise the limits MAXMSG_DATA, MAXMSG_STATUS , MAXMSG_CLIENT in xymonserver.cfg ? By any chance only for some special hosts ? thanks & cheers Martin

2 1

Case-sensitivity of test (column) name
by Wim.Nelis＠nlr.nl 21 Feb '12

21 Feb '12

Hello, we are using Xymon 4.3.7, and have implemented an additional test which measures the number of simultaneous sessions through a Checkpoint firewall. The test is called 'session'. The data in the status message to Xymon is formatted as shown below: Simultaneous sessions  This test is defined in xymonserver.cfg (TEST2RRD= ...,session=ncv, GRAPHS=...,session, NCV_session="*:GAUGE"). The test is shown, with title "session", but the RRD is not updated and it is not possible to get a graph. In stead of a graph, the text "xymongraph Session" is shown. A test named Session is defined in xymonserver.cfg and an associated graph in graphs.cfg. It seems that some parts od Xymon are case-sensitive and do not get confused by these two names. The test is shown on the appropriate Xymon web page, and status changes are reported. However, RRD updating and graphing seem to get confused. The problems are solved by renaming the test from "session" to "fwsession". Still, I like to know if Xymon should have handled the case described above correctly, thus including updating the RRD and showing a graph, as I have found nothing in the documentation with regard to case-(in)sensitivity of test (column) names. Kind regards, Wim Nelis. ****************************************************************************************************************** The NLR disclaimer is valid for NLR e-mail messages. This message is only meant for providing information. Nothing in this e-mail message amounts to a contractual or legal commitment on the part of the sender. This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. Sender accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages. ******************************************************************************************************************

1 0

xymon client installation on centos 6 x64
by paveltraian＠yahoo.com 21 Feb '12

21 Feb '12

Hi, I am new in this area and i want to know where i can find a step by step installation guide for xymon client on CentOS 6 x64. Also i would like to know how to see if the client is working ok or not. Regards, Traian.

3 2

mrtg graphs
by Rolands＠logicaltech.com.au 20 Feb '12

20 Feb '12

Can't get my mrtg graphs showing up on the trends page. I have followed the instruction in the help page, "Integrating MRTG data into Xymon" I get the rrd ok, but I only get a broken link "xymongraph mrtg" to the graph in the trends page. Can't see any logs with any errors, looked in apache2 logs and xymon logs. Rrdtool dump doesn't show anything strange, maybe "<type> COUNTER </type>" usually this is GAUGE. I'm not really good at deciphering rrd stuff. There is a "mrtg::1" entry in "xymonserver.cfg:GRAPHS" The graphs.cfg has the default [mrtg] entry I tried a few different mrtg entries in mrtg.conf, I just get another broken link. My mrtg.conf # For Xymon integration WorkDir: /usr/local/xymon/data/rrd LogFormat: rrdtool Directory[mrtg.ipndbdr.isdn_total]: ipndbdr Target[mrtg.ipndbdr.isdn_total]: `/usr/local/mrtg-2/bin/mrtg-isdn` MaxBytes[mrtg.ipndbdr.isdn_total]: 100000000000 Title[mrtg.ipndbdr.isdn_total]: ipndbdr ISDN Total Directory[mrtg.ipndbdr.eth_]: ipndbdr Target[mrtg.ipndbdr.eth_]: 1:ipndmon at 192.11.14.248:161 MaxBytes[mrtg.ipndbdr.eth_]: 1000000000 Title[mrtg.ipndbdr.eth_]: ipndbdr eth Btw Running 4.3.5 on Solaris 10 x86 How do I go about troubleshooting this?

1 1

Yellow bars under column names
by malcolm.hunter＠gmx.com 20 Feb '12

20 Feb '12

> ----- Original Message ----- > From: Malcolm Hunter > Sent: 02/20/12 02:13 PM > To: xymon at xymon.com > Subject: Re: [Xymon] Yellow bars under column names > > > ----- Original Message ----- > > From: Neil Simmonds > > Sent: 02/20/12 10:33 AM > > To: xymon at xymon.com > > Subject: Re: [Xymon] Yellow bars under column names > > > > I've just done some quick checking and it looks like it's a Firefox > > thing. > > > > > > > > I don't get it in IE9, Safari or Chrome but I do see the same as Michael > > in Firefox. > > I get the same effect in IE8. This is correct behaviour based on the contents of xymonbody.css: It seems that Chrome (and looks like IE9 too) honours the HTML FONT tag around the link text, which overrides the css: <A HREF="/xymon-cgi/columndoc.sh?bbd"><FONT COLOR="#87a9e5" SIZE="-1"><B>bbd</B></FONT></A> The styling should really be done with css alone otherwise we will get these inconsistencies between browsers. I seem to recall we've had conversations about this kind of thing on the list before. Malcolm -- BBWin Development - The Windows client for Big Brother and Xymon http://bbwin.sourceforge.net http://xymon.sourceforge.net

1 0