- Xymon - Xymon mailman web

pmacct and xymon
by waynetg＠gmail.com 22 Jul '09

22 Jul '09

Hiya Is there any move towards gathering networking statistics using pmacct? I've googled a bit and browsed their documentation but I don't see anything? If no what alternative is there? Thanks Wayne

1 0

hobbitmon 4.2.3 client on esx 3.5.0 works first time only - then goes purple
by steve.overy＠gb.unisys.com 22 Jul '09

22 Jul '09

Hi, I have hobbitmon clients running on various servers; this week turned my attentions to some ESX servers. The hobbitmon client configure/make went fine & after running "runclient.sh start" the status columns of the hobbitmon server display page went green (and expected data reported). However, 20 - 30 minutes later, those statuses went purple & inspecting the data showed (from the timestamp) that the client ran only the first time. The ...client/logs show nothing untoward, no core files in ...client/tmp - and I opened the ESX firewall port! Client start-up [xymon at esx112 logs]$ ../runclient.sh start Hobbit client for linux started on esx112 [xymon at esx112 logs]$ date Wed Jul 22 11:32:04 BST 2009 Initial data reported (green smiley's) (server: http://W.X.Y.Z/xymon-cgi/bb-hostsvc.sh?HOST=esx112&SERVICE=cpu<http://w.x.y.z/xymon-cgi/bb-hostsvc.sh?HOST=esx112&SERVICE=cpu> ) Top of Form Bottom of Form Wed Jul 22 11:31:56 BST 2009 up: 113 days, 2 users, 72 procs, load=0.02 System clock is -220 seconds off However, a little over 30 minutes later those smiley's went purple & the data timestamp was unchanged from the above. The logs show little log/hobbitclient.log # no entries even for the start-up log/clientlaunch.log 2009-07-22 11:31:56 hobbitlaunch starting 2009-07-22 11:31:56 Loading tasklist configuration from /home/xymon/client/etc/clientlaunch.cfg 2009-07-22 11:31:56 Task client started with PID 31241 And there is nothing in: /var/log/messages And no core files: [root at esx112 xymon]# pwd /home/xymon [root at esx112 xymon]# find . -name "*core*" [root at esx112 xymon]# Looking at xymon processes I notice that there is a difference between a working linux client and this failed esx client. Working SLES10-SP2 client: xymon 5155 1 0 May28 ? 00:00:02 /home/xymon/client/bin/hobbitlau nch --config=/home/xymon/client/etc/clientlaunch.cfg --log=/home/xymon/client/lo gs/clientlaunch.log --pidfile=/home/xymon/client/logs/clientlaunch.sles10-SP2-do mU-1.pid xymon 18347 1 0 12:11 ? 00:00:00 sh -c vmstat 300 2 1>/home/xymon /client/tmp/hobbit_vmstat.sles10-SP2-domU-1.18313 2>&1; mv /home/xymon/client/tm p/hobbit_vmstat.sles10-SP2-domU-1.18313 /home/xymon/client/tmp/hobbit_vmstat.sle s10-SP2-domU-1 xymon 18349 18347 0 12:11 ? 00:00:00 vmstat 300 2 Failed esx 3.5.0 client: [root at esx112 xymon]# ps -ef|grep "^xymon" xymon 30803 30801 0 09:38 ? 00:00:00 sshd: xymon at pts/0 xymon 30804 30803 0 09:38 pts/0 00:00:00 -bash xymon 31240 1 0 11:31 ? 00:00:00 /home/xymon/client/bin/hobbitlaunch --verbose --config=/home/xymon/client/etc/clientlaunch.cfg --log=/home/xymon/client/logs/clientlaunch.log --pidfile=/home/xymon/client/logs/clientlaunch.esx112.pid So vmstat seems to be a clue... so I ran hobbitclient-linux.sh - no errors reported in the output & a "0" return code. Any ideas where I go next? TIA & regards steve overy | support analyst | EMEA Client Support Centre | Global Outsourcing and Infrastructure Services Unisys Limited | Fox Milne | Tongwell Street, Milton Keynes, MK15 0YS Registered in England Company No. 103709 Registered Office: Bakers Court, Bakers Road, Uxbridge, UB8 1RG Phone: +44 (0) 1908 212306, net 741 2306 Mobile: +44 (0) 7808 391673, net 839 1673 Email: steve.overy at unisys.com THIS COMMUNICATION MAY CONTAIN CONFIDENTIAL AND/OR OTHERWISE PROPRIETARY MATERIAL and is thus for use only by the intended recipient. If you received this in error, please contact the sender and delete the e-mail and its attachments from all computers.

1 0

AUTO: Derek K. Deckert is out of the office (returning 07/23/2009)
by DKDeckert＠Hormel.com 22 Jul '09

22 Jul '09

I am out of the office until 07/23/2009. Note: This is an automated response to your message "?Re: [hobbit] hobbitfetch / pulldata doesn't work" sent on 7/22/2009 4:37:20 AM. This is the only notification you will receive while this person is away. Notice: This communication is an electronic communication within the meaning of the Electronic Communications Privacy Act, 18 U.S.C. � 2510. Its disclosure is strictly limited to the recipient(s) intended by the sender of this message. This transmission and any attachments may contain proprietary, confidential, attorney-client privileged information and/or attorney work product. If you are not the intended recipient, any disclosure, copying, distribution, reliance on, or use of any of the information contained herein is STRICTLY PROHIBITED. Please destroy the original transmission and its attachments without reading or saving in any matter and confirm by return email.

1 0

file system monitoring
by kkelly＠lifetouch.com 21 Jul '09

21 Jul '09

Trying to figure out the best way to monitor a file system so that it will alert two different groups at different alert levels. Example DISK /home 90 95 GROUP=appgroup DISK /home 96 98 I would also like xymon stay green until the 2nd condition is reach (96 98). Any suggestions? ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email _____________________________________________________________________

2 1

Xymon CentOS 5 installation
by nfranken＠theunlimitedworld.co.za 21 Jul '09

21 Jul '09

Hi Guys and Gals. I am busy moving my POC Xymon server to a full time dedicated server. I have been using my Ubuntu Distro for development and testing and would like to install the server CentOS. I have a look at the installation instructions on the Wiki about CentOS spcifics but it seems bit outdated. For example it still creates a Hobbit user and so on. Can anyone here give me some pointers so I can avoid a lot of frustration. Regards Neil

4 7

Firefox 3.5 and magnifier
by hj.beckers＠kreis-steinfurt.de 21 Jul '09

21 Jul '09

Using the latest firerox, whenever I use the magnifier to zoom into a graph, all I get is this lousy blue screen (see attached png ) I tried with a new profile, same result. Firefox 3.0.11 doesn't show this behaviour. Any hints? Bugreport at Mozilla?

12 15

monitoring etc passwd
by gleonard＠progrexion.com 20 Jul '09

20 Jul '09

Hi All, I am having a problem where users and groups are being created without the knowledge of the admin team and its making it difficult to know who had access to what systems if they leave the company... is there a way for hobbit to tell me when the /etc/passwd or /etc/group files change? Thanks in Advance.. -Gavin

8 11

[hobbit] hobbitd using up CPU
by Craig.Cook＠carquest.com 20 Jul '09

20 Jul '09

>I'm running hobbit 4.2.3 inside a Solaris 10 Zone on a sun v240 and noticing high CPU load. > >Is this normal? Are others seeing hobbitd rack up loads of CPU time? No, this is not normal. Well, it may depend on how many hosts Xymon is monitoring... Check your process listing for each hobbitd that has a high CPU load and check the corresponding log files for issues. Do you see anything unusual on your trend page for you Xymon server? Also check your bbgen and bbtest status results for your Xymon server. Craig

1 0

nstab.html
by bb4＠richter-it.net 20 Jul '09

20 Jul '09

Hi all, I'm running Hobbit 4.3.0-0.beta2 and experienced a problem with the sidebar in Mozilla/Netscape. Although on bb2.html all errors were displayed none of them was displayed on nstab.html. The following changes in rssgen.c solved the problem: --- rssgen.c.orig 2009-07-20 11:37:37.050240000 +0200 +++ rssgen.c 2009-07-20 11:38:10.945390243 +0200 @@ -266,8 +266,8 @@ e->column->name); } else { - fprintf(fd, "\t<A TARGET=\"_content\" HREF=\"%s%s\"", - xgetenv("BBWEB"), + fprintf(fd, "\t<A TARGET=\"_content\" HREF=\"%s%s\">", + xgetenv("BBWEBHOST"), hostsvcurl(h->hostname, e->column->name, 1)); } fprintf(fd, "%s (%s)</A>\n", Regards Torsten

1 0

Username to Authenticate Other than bb.html?
by DHernandez＠clearcore.ca 20 Jul '09

20 Jul '09

Hi, I was wondering if anyone could help me, I am attempting to create a username that authenticates into a specific webpage (ex. /hobbit/<companyname>.html) that is already created? Any help would be greatly appreciated it. Thanks. ______________________________________________________________________ David Hernandez Network Analyst ClearCore Solutions #700, 205 - 5th Ave SW | Calgary, AB | T2P 2V7 | www.clearcore.ca<http://www.clearcore.ca/> tel: 403.560.3231 | fax: 403.538.4816 | mob: 403.690.9405 | dhernandez at clearcore.ca<mailto:dhernandez at clearcore.ca>

3 2