- Xymon - Xymon mailman web

catch-all UNMATCHED syntax
by jm54601＠yahoo.com 11 Aug '08

11 Aug '08

Is it possible to set up the syntax in hobbit-alerts.cfg so the UNMATCHED receipient matches **only** unmatched hosts and does not show up on every host's info page? This doesn't seem to work the way I would like: HOST=* UNMATCHED MAIL nobody at domain.com

1 0

RRD Graphing configuration
by wrichardson＠llbean.com 11 Aug '08

11 Aug '08

Thanks for the help.. I think i'll try the rrdcreate and let you know. On Mon, Aug 11, 2008 at 8:53 AM, Bill Richardson <wrichardson (at) llbean.com>wrote: > I have looked high and low for a way to change how custom rrd's are > created in hobbit. > > I have created a custom script to graph and have 2 problems that I would > like to figure out. > > 1.) I would like to change the step from 300 secs to 60 secs in the rrd's > and run the script ever 60 secs instead of 300 secs. "The default rrd > behavior is set to 300 secs" > 2.) I would like to get the true values not average. The problem is I > have data that I want to graph that can range from 0 to 5 "thats 0, 1, 2, > 3, 4 or 5" and the graph shows average so my graphs come out with numbers > like 6m "6 milli" for a true value of 2 and so on. The problem is the > data will sit a 0 for an hour or more and then go to 1 or 2 for just one > sample. Average is not the right choice and I cant get the true figures I 'm > looking for. > > Seems like the way to do this is in the hobbitserver.cfg. I added the > following to the hobbitserver.cfg > > NCV_testgraph="test1total:GAUGE,test2total:GAUGE,test3total:GAUGE" > > What other values can you pass to rrd other than GAUGE? Can I set a step > to say 60 instead or 300 and can I change the default behavior of AVERAGE to > something else that may work for my above example? The rrd docs are not > clear on this. > > Early on I was thinking that maybe I could fix the AVERAGE problem with a > change to the hobbitgraph.cfg but this is what I found: > The hobbitgraph.cfg does not have any effect on how rrd file is created. I > deleted the testgraph.rrd made the changes to hobbitgraph.cfg and no go. > You cant see the graphs if you use anything but AVERAGE after changing the > hobbitgraph.cfg. It looks like the *.rrd's are created by default "AVERAGE" > and you just edit the hobbitgraph.cfg to view whats already built. I need to > figure out how to change the way the rrd's are built and its not thru > the hobbitgraph.cfg. > If you're comfortable about fooling with the source, there are a couple of places where you can make changes to achieve what you want: hobbit-4.2.0/hobbitd/do_rrd.c contains these definitions: static char rra1[] = "RRA:AVERAGE:0.5:1:576"; static char rra2[] = "RRA:AVERAGE:0.5:6:576"; static char rra3[] = "RRA:AVERAGE:0.5:24:576"; static char rra4[] = "RRA:AVERAGE:0.5:288:576"; BUT - if you change those, I think *every* new rrd created by Hobbit would pick up the same changes. do_rrd.c also includes a bunch of test-specific files, one of which is hobbitd/rrd/do_ncv.c. That contains the code that examines NCV_xxx and sets up DS entries to match.: sprintf(dsdef, "DS:%s:%s:600:0:U", dsname, dstype); or sprintf(dsdef, "DS:%s:DERIVE:600:0:U", dsname); A bit further down it copies in the above rra1 - rra4 definitions. So, you could change the hardwired DS and RRA values in do_ncv.c, but ONLY if you don't have any other NCV that would need to be different... Another way to get towards what you want would be to hand-create the rrd. Hobbit won't overwrite an existing rrd. I think the rrdcreate would look something like this: rrdtool create testgraph \ DS:test1total:GAUGE:60:0:U \ DS:test2total:GAUGE:60:0:U \ DS:test3total:GAUGE:60:0:U \ RRA:AVERAGE:0.5:1:576 \ RRA:AVERAGE:0.5:6:576 \ RRA:AVERAGE:0.5:24:576 \ RRA:AVERAGE:0.5:288:576 I haven't tried this myself, but I think Hobbit would be able to do updates correctly. Ralph Mitchell

1 0

RRD Graphing configuration
by wrichardson＠llbean.com 11 Aug '08

11 Aug '08

I have looked high and low for a way to change how custom rrd's are created in hobbit. I have created a custom script to graph and have 2 problems that I would like to figure out. 1.) I would like to change the step from 300 secs to 60 secs in the rrd's and run the script ever 60 secs instead of 300 secs. "The default rrd behavior is set to 300 secs" 2.) I would like to get the true values not average. The problem is I have data that I want to graph that can range from 0 to 5 "thats 0, 1, 2, 3, 4 or 5" and the graph shows average so my graphs come out with numbers like 6m "6 milli" for a true value of 2 and so on. The problem is the data will sit a 0 for an hour or more and then go to 1 or 2 for just one sample. Average is not the right choice and I cant get the true figures I 'm looking for. Seems like the way to do this is in the hobbitserver.cfg. I added the following to the hobbitserver.cfg NCV_testgraph="test1total:GAUGE,test2total:GAUGE,test3total:GAUGE" What other values can you pass to rrd other than GAUGE? Can I set a step to say 60 instead or 300 and can I change the default behavior of AVERAGE to something else that may work for my above example? The rrd docs are not clear on this. Early on I was thinking that maybe I could fix the AVERAGE problem with a change to the hobbitgraph.cfg but this is what I found: The hobbitgraph.cfg does not have any effect on how rrd file is created. I deleted the testgraph.rrd made the changes to hobbitgraph.cfg and no go. You cant see the graphs if you use anything but AVERAGE after changing the hobbitgraph.cfg. It looks like the *.rrd's are created by default "AVERAGE" and you just edit the hobbitgraph.cfg to view whats already built. I need to figure out how to change the way the rrd's are built and its not thru the hobbitgraph.cfg. BTW here is the output from rrdtool dump see attached. You will see two areas that need to be changed "the step 300 and AVERAGE" 1: <rrd> <version> 0003 </version> <step> 300 </step>  2:  <rra> <cf> AVERAGE </cf> Thanks for any clues... : ) Bill Richardson

4 3

Historical data not available anymore
by Jelle.Smet＠teleatlas.com 11 Aug '08

11 Aug '08

Hi list, A couple days ago we had a Hobbit server crashing (for a yet unknown reason bbnet ended with signal 6). I was able to bring it back up and running. Now I don't have the historical data available anymore from before the crash. It's possible though to consult the historical data from the crash until now. Strange enough, /opt/hobbit/data/histlogs contains all the historical, old data even the one from before the crash, yet I can't generate a historical overview which contains that data. I've looked at the user rights of those files and the files are all owned by the correct user. The files don't appear to be corrupt. Anyone knows what the issue might be, or how to troubleshoot this? Cheers, Js

1 1

hobbitmon Read The Fine Manpage
by tj_yang＠hotmail.com 10 Aug '08

10 Aug '08

RTFM and with index,toc. pdf file is here http://hobbitmon.svn.sourceforge.net/viewvc/hobbitmon/branches/tjyang/src/b… source is in one directory up. as always so far, my hobbit work in alpha quality. tj

1 0

Hobbit renaming status ?
by tj_yang＠hotmail.com 09 Aug '08

09 Aug '08

Can't wait until decision made by Henrik. I am betting the new name will be hobbitmon. Thus I am using hobbitmon in my current development work. but would it be HobbitMon or hobbitmon ? tj

3 3

[hobbit] Hobbit renaming status ?
by lars.ebeling＠leopg9.no-ip.org 09 Aug '08

09 Aug '08

"> I have two other names that I've come up with. The first is "G-Lance" > meaning "viGiLance", "monitoring at a G-Lance", and the 'G' could also > mean GNU, GPL, Gratis etc. g-lance.com is registered to someone doing > graphics free-lance work, but I've grabbed .net, .org and .eu. > HP has a product for monitoring name Glanceplus. Lars -- Regards Lars Ebeling http://leopg9.no-ip.org Hobbithobbyist "I am not young enough to know everything." -- Oscar Wilde

3 2

Why the next Hobbit release hasn't happened yet
by henrik＠hswn.dk 09 Aug '08

09 Aug '08

Note1: There's nothing Hobbit-technical in this mail, so feel free to just hit "delete" if that is why you're reading the list. Note2: A few people are receiving this directly; don't worry, I haven't auto-subscribed you to the Hobbit mailing list. It's just easier to write this only once. I've received a couple of concerned e-mails over the past few days, asking me if there was "something wrong" since I haven't done any work on the Hobbit snapshots. The answer to that question is "sort of", but nothing truly serious. I guess I am just experiencing a mild degree of burnout(1) regarding Hobbit programming. Several factors at my for-pay work (I work for CSC in Copenhagen) have probably contributed to this; there's been some downsizing and organizational upheavals, and I've had to step in and support one of my colleagues who was very close to collapsing with severe stress. Some people just cannot say "no"; I can, and so I had to do some "no-saying" on her befalf while helping her get the projects finished. On top of that, I've had some vision problems the past 4 months. Vision on my left is rather bad because of a severe case of floaters(2), which will probably require some eye surgery later this year. This is quite annoying when working with a computer monitor, since the text appears blurred. Another complication has been a legal issue. I've had some e-mail exchanges with the people representing J.R.R.Tolkien / Lord of the Rings; however, this has been resolved in an acceptable manner. More on that in my next mail. Also, I have chosen to focus some of my time on taking care of myself - in the beginning of this year I decided that I was getting a bit fat and started going to a gym. I've never done fitnes or sports of any kind (being the true geek that I really am :-)), and losing 30 lbs does take some time and effort away from other activities. Contrary to what some people claim, I do NOT feel more energetic after a two-hour workout; I feel sleepy. However, that project is proceeding as planned and by the end of the year I should be in much better shape than I was at the beginning of 2008. So what do I do now? I feel that I've gotten some energy back and can start looking at coding some again. I need to wrap up the current code so it is in a reasonable state for all of you to start testing. I'm on my summer holidays for most of August, and the weather forecast for next week looks like there will be plenty of time to stay indoors. So I promise to produce an alpha release within two weeks. Then we can start playing with it and see how buggy it is. It would obviously be good to have more people involved in the programming. One roadblock for this has been that the source code has not been available in a public repository. That is about to change; I am working on setting up a Subversion repository for the Hobbit code on SourceForge. I am currently testing a dump/import of the RCS modules into Subversion, and if that looks to be OK I'll upload it to Sourceforge tomorrow. So by Monday, this should be available to anyone who wants to hack Hobbit. Documentation on how you use SVN (Subversion) on Sourceforge is available at SF(3). One thing that has made me very happy is that the support available on the mailing list apparently works quite well even when I am not around. It is a great relief for me to see how helpful this community is; you really are an important part of this project. Regards, Henrik 1) http://en.wikipedia.org/wiki/Burnout_(psychology) 2) http://en.wikipedia.org/wiki/Floaters 3) http://alexandria.wiki.sourceforge.net/Subversion+-+Version+Control+for+Sou…

7 11

[hobbit] Need help in hobbit monitor
by s_aiello＠comcast.net 08 Aug '08

08 Aug '08

On Friday 08 August 2008 12:17:22 you wrote: > On Friday 08 August 2008 10:54:53 Perumal, Santoshbabu wrote: > > 3) by default I see files,msgs,ports and procs status are white > > color. if I don't want to monitor files,msgs,ports and procs how do I > > get rid of those entries showing on the webpage.basicall I want to see > > only conn,cpu,disk,info,memory,ssh and trends. > > Edit server/etc/hobbitlaunch.cfg > navigate to the [clientdata] section. > Add to the end of the CMD line: --no-clear-msgs --no-clear-files > --no-clear- ports. > > see man hobbitd_client for details of these parameters. > > ~Steve Oh yeah, if you choose that option, those clears will then turn purple after 30 mins. You will need to drop them, after you add those parameters.

3 3

[hobbit] host-specific settings
by Chris.Morris＠RWEsystemsUK.com 08 Aug '08

08 Aug '08

You need to put the server specific entry(ies) BEFORE the default settings. _____ From: Johan Booysen [mailto:johan at matrix-data.co.uk] Sent: 08 August 2008 11:34 To: hobbit at hswn.dk Subject: [hobbit] host-specific settings I'm new to hobbit monitor, and trying to set up host-specific settings in hobbit-clients.cfg on the hobbit server. At the moment I want to do a simple test, so that default settings apply to all clients except for server1 for which I want to use other disk space parameters: In hobbit-clients.cfg I have: DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 50 80 MEMACT 90 97 HOST=server1 DISK * 95 99 However, server1 still applies the default settings for DISK. I've reloaded the hobbit service so it rereads its config files, but after about 30 minutes the changes still don't seem to have taken effect. I've followed the instructions on the hobbit-config.html help page, but think I may be missing something. Any advice on this? Thanks. ********************************************************************** This e-mail including any attachments is provided for general information purposes only and does not constitute advice except to the addressee if expressly stated in this email. For the avoidance of doubt the contents of this email and any attachments are subject to contract and are not intended to and will not constitute a legally binding contract or any part of a legally binding contract. The information contained in this email and any attachments is confidential. It is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination, distribution or copying of the message or associated attachments is strictly prohibited. If you have received this e-mail in error, please notify postmaster at RWEsystemsUK.com and permanently delete the email and any attachments immediately from your system. You should not retain, copy or use this email or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you for your co-operation. Neither RWE IT UK Ltd nor any of the other companies in the RWE Group from whom this e-mail originates accept any responsibility for losses or damage as a result of any viruses and it is your responsibility to check attachments (if any) for viruses. RWE IT UK Ltd Registered office: Mistral, Westlea Campus, Chelmsford Road, Swindon, Wiltshire, SN5 7EZ. Registered in England and Wales: company number 6052966. *******************************************

3 5