- Xymon - Xymon mailman web

WinPSClient msgs
by tolomelli.luca＠gmail.com 14 Apr '19

14 Apr '19

Using WinPSClient can I set the analysis.cfg based upon some events ID? If so, how?

1 0

Call for 4.3.29 Patches
by abs＠shadymint.com 12 Apr '19

12 Apr '19

Hi JC, On Tue, Mar 26, 2019 at 01:37:32PM -0700, Japheth Cleaver wrote: > I'm pushing for a release of 4.3.29 relatively soon. These 2 changes allow you to run the client from a shared directory. *** ./client/runclient.sh.FCS Wed Jan 27 21:12:32 2016 --- ./client/runclient.sh Fri Apr 12 07:14:38 2019 *************** *** 86,92 **** rm -f $XYMONCLIENTHOME/logs/clientlaunch.$MACHINEDOTS.pid fi ! $XYMONCLIENTHOME/bin/xymonlaunch --config=$XYMONCLIENTHOME/etc/clientlaunch.cfg --log=$XYMONCLIENTHOME/logs/clientlaunch.log --pidfile=$XYMONCLIENTHOME/logs/clientlaunch.$MACHINEDOTS.pid if test $? -eq 0; then echo "Xymon client for $SERVEROSTYPE started on $MACHINEDOTS" else --- 86,92 ---- rm -f $XYMONCLIENTHOME/logs/clientlaunch.$MACHINEDOTS.pid fi ! $XYMONCLIENTHOME/bin/xymonlaunch --config=$XYMONCLIENTHOME/etc/clientlaunch.cfg --log=$XYMONCLIENTHOME/logs/clientlaunch.$MACHINEDOTS.log --pidfile=$XYMONCLIENTHOME/logs/clientlaunch.$MACHINEDOTS.pid if test $? -eq 0; then echo "Xymon client for $SERVEROSTYPE started on $MACHINEDOTS" else *** ./client/clientlaunch.cfg.FCS Wed Apr 10 09:40:32 2019 --- ./client/clientlaunch.cfg Fri Apr 12 07:14:55 2019 *************** *** 17,28 **** DISABLED ENVFILE $XYMONCLIENTHOME/etc/xymonclient.cfg CMD $XYMONCLIENTHOME/bin/msgcache --no-daemon --pidfile=$XYMONCLIENTLOGS/msgcache.pid ! LOGFILE $XYMONCLIENTLOGS/msgcache.log # The main client task [client] ENVFILE $XYMONCLIENTHOME/etc/xymonclient.cfg CMD $XYMONCLIENTHOME/bin/xymonclient.sh ! LOGFILE $XYMONCLIENTLOGS/xymonclient.log INTERVAL 5m --- 17,28 ---- DISABLED ENVFILE $XYMONCLIENTHOME/etc/xymonclient.cfg CMD $XYMONCLIENTHOME/bin/msgcache --no-daemon --pidfile=$XYMONCLIENTLOGS/msgcache.pid ! LOGFILE $XYMONCLIENTLOGS/msgcache.$MACHINEDOTS.log # The main client task [client] ENVFILE $XYMONCLIENTHOME/etc/xymonclient.cfg CMD $XYMONCLIENTHOME/bin/xymonclient.sh ! LOGFILE $XYMONCLIENTLOGS/xymonclient.$MACHINEDOTS.log INTERVAL 5m -- Andy

2 1

clientconfig.cfg - local configuration check definitions
by storerr＠nibco.com 12 Apr '19

12 Apr '19

Zak (or anyone else who knows), If I want to configure a Windows server running the XymonPSClient using the clientconfig.cfg file, where can I find documentation on how to configure each of the checks? In particular, I'd like to run checks on services (SVCS), processes (PROCS) and files (FILES). If you have examples, I would appreciate seeing them. I understand I have to configure alerting on the Xymon server. If you feel strongly about client configuration belonging on the Xymon server, feel free to point me at documentation for that too. Thanks. Ray Storer ________________________________ CONFIDENTIALITY NOTICE: This email and any attachments are for the exclusive and confidential use of the intended recipient. If you are not the intended recipient, please do not read, distribute or take action in reliance upon this message. If you have received this in error, please notify us immediately by return email and promptly delete this message and its attachments from your computer system. We do not waive attorney-client or work product privilege by the transmission of this message.

3 4

Call for 4.3.29 Patches
by cleaver＠terabithia.org 12 Apr '19

12 Apr '19

Hello all, I'm pushing for a release of 4.3.29 relatively soon. I've been trying to go through the backlog to identify un-applied patches, but I know there are some that I'm missing. If you have build fixes or runtime changes that have not yet been put in in 4.3.29 already (see: https://sourceforge.net/p/xymon/code/HEAD/tree/branches/4.3.29/Changes) I'd appreciate if you could point them out. Regards, -jc

8 14

conn-check too slow?
by christian.becker＠rhein-zeitung.net 11 Apr '19

11 Apr '19

Hello out there, we have a huge number of Windows virtual machines that run on HyperV. All of them are using bbwin to report their health to our Xymon server. If such a Windows virtual machine reboots, either planned or unplanned, it reboots that fast in HyperV, that Xymon doesn't recognize this in the conn or cpu test, but only in the uptime test which goes yellow for the time as defined in analysis.cfg. How do you guys handle this, when you want to know if a Windows virtual machine has rebooted? Is alerting on uptime the only way for a reboot? Here's our xymonnet section from xymonserver.cfg: [xymonnet] ENVFILE /opt/xymon/server/etc/xymonserver.cfg NEEDS xymond CMD xymonnet --report --ping --checkresponse --no-ares --bb-proxy-syntax --shuffle LOGFILE $XYMONSERVERLOGS/xymonnet.log INTERVAL 2m Anything worth to change here?? Regards and tanks in advance Christian

1 0

xymonproxy setup
by john.r.rothlisberger＠accenture.com 09 Apr '19

09 Apr '19

Can anyone help clue me in to how to get xymonproxy to work? In my environment I have multiple Xymon servers that I would like to have them report to a single server. (xymonserver[1-5] -> xymonserverA) In tasks.cfg (on one of them for testing) I setup xymonproxy as such: [xymonproxy] ENABLED ENVFILE /home/xymon/server/etc/xymonserver.cfg CMD $XYMONHOME/bin/xymonproxy --server=xymonserverA-IP --report=xymonserverA-IP.xymonproxy - -no-daemon --pidfile=$XYMONSERVERLOGS/xymonproxy.pid LOGFILE $XYMONSERVERLOGS/xymonproxy.log For xymond, history, alert, clientdata, rrdstatus, rrddata, hostdata, xymonfetch - were all set to DISABLED. For xymongen, xymonnet, xymonnetagain - were all active with NEEDS xymond. I left xymonserver1 listening on port 1984 for data from its clients. Xymonserver1 also reports to xymonserverA as a client (no issues here). Xymonserver1 continued to work normally with nothing being sent to xymonserverA. Either I am trying to use xymonproxy incorrectly or I have something misconfigured. Ideas? Thanks, John Upcoming PTO: May 10th-17th _____________________________________________________________________ John Rothlisberger IT Strategy, Infrastructure & Security - Technology Growth Platform TGP for Business Process Outsourcing Accenture 312.693.3136 office _____________________________________________________________________ ________________________________ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. Your privacy is important to us. Accenture uses your personal data only in compliance with data protection laws. For further information on how Accenture processes your personal data, please see our privacy statement at https://www.accenture.com/us-en/privacy-policy. ______________________________________________________________________________________ www.accenture.com

2 1

Xymon-Client in Solaris
by jgsuareza1984＠gmail.com 05 Apr '19

05 Apr '19

HI I already have the server, now I need to install the client xymon on Solaris Sparc Do you need any special configuration in Solaris Sparc as a client? Atentamente, *Gabriel Suárez*

2 1

CPU LOAD
by tolomelli.luca＠gmail.com 01 Apr '19

01 Apr '19

The Analysys.cfg has this default LOAD value: LOAD 5.0 10.0 For a 2 CPU machine, wouldn't those values be too high? A load 2.0 on a 2 CPU machine means a 100% usage of the total "CPU power", right? Any help is appreciated Luca

2 2

Workflow? - Call for 4.3.29 Patches
by frankk74＠gmail.com 29 Mar '19

29 Mar '19

Hi Everyone, I have been lurking and using xymon 4.3.28 for over a year now... Thanks to all it is a great tool! Just a quick question regarding submitting patches? I think there are many ways to do so :-)...JC you seem to be the main "driver" (thank you btw) so what is your preference? It seems github fork and pull requests are the current standard? Is this method okay for you? Sorry if this a FAQ..? Thx! Frank

2 2

CPU usage
by tolomelli.luca＠gmail.com 29 Mar '19

29 Mar '19

On a Windows 2012 R2 Virtual Machine with 1 CPU and 4 GB RAM, every 5 minutes (when XymonPSClient v2.41 run its "data collection") the CPU usage goes to 100%: 65% CPU usage by svchost.exe (LocalServiceNetworkRestricted) 35% CPU usage by powershell.exe Is it normal? Thanks Luca

1 0