- Xymon - Xymon mailman web

change disk alert level for single volume.
by eric＠iconla.com 20 Feb '07

20 Feb '07

Hello all, I have one volume on one client that is using a vdl. The drive reports back at 95% How can I set hobbit to stay green until the drive is 96% and then go red? Do I change this on the client or on the server? -Eric

2 1

Change for the hobbit client under FreeBSD
by rob.macgregor＠gmail.com 20 Feb '07

20 Feb '07

Can I request that "fdescfs" is added to the list of file systems that df doesn't return information on. I've recently had reason to add this to a number of hosts and, as it's a pseudo file system that's always 100%, it then causes a red alert for the disk status on those hosts. Either that or a generic change to ignore any mount point that doesn't have a "/" in it (which should catch any pseudo filesystem). Patch for the former attached as that bit's easy :) -- Rob MacGregor Whoever fights monsters should see to it that in the process he doesn't become a monster. Friedrich Nietzsche

2 1

Re: [hobbit] ncv can´t handle negative values
by Thomas.Kern＠hq.doe.gov 20 Feb '07

20 Feb '07

Just for safety, we should add a plus "+" and a comma "," to the string, in case some source of data provides +9,876.54 as a value. -------------------------- Thomas Kern 301-903-2211 ----- Original Message ----- From: henrik at hswn.dk <henrik at hswn.dk> To: hobbit at hswn.dk <hobbit at hswn.dk> Sent: Mon Feb 19 17:43:02 2007 Subject: Re: [hobbit] ncv can´t handle negative values On Mon, Feb 19, 2007 at 07:00:48PM +0100, hansi tesarz wrote: > is there an easy way to change the code so that ncv values can handle > negative values. I think there is: In the hobbit-4.2.0/hobbitd/rrd/do_ncv.c file around line 65 there's this line: l = val + strspn(val, "0123456789."); Add a "-" before the numbers so it becomes l = val + strspn(val, "-0123456789."); Run "make" and copy the hobbit-4.2.0/hobbitd/hobbitd_rrd binary to your ~hobbit/server/bin/ directory (or just run "make install"), then restart Hobbit. Haven't tested it, but I think it should do the trick. Regards, Henrik To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

3 3

Loadbalancing Hobbit Server
by ram.1prasad＠ge.com 20 Feb '07

20 Feb '07

Hi I would like to implement hobbit collecting data from lot of hosts. Considering that, is there a way to load balance or distribute the monitoring across multiple hobbit servers ? - Ram

4 6

opposite of badconn function
by joost＠seat-ibiza.nl 20 Feb '07

20 Feb '07

Hi, Don't know if it is already possible, but couldn't find it on the mailinglists / manpages. I have a server behind a router which occasionally have huge packet loss. Because of this, the connection status switches rapidly between green and red. I'd like to prevent this from happening and want to let the check stay red until it has succeeded multiple times. So this would be something like the opposite of badconn: goodconn:1:2:4 would get back yellow after 2 and get back green after 4 successive replies. Does this make sense at all? Regards, Joost

1 0

zoom graph feature
by gjohnson＠trantor.org 20 Feb '07

20 Feb '07

I think this has come up previously but I don't recall seeing a response...but how hard would it be to have the Zoom Graph function set the graph max to more accurately reflect the height of the block you select...ie, if I have a low load and I select a max height of around .2 when I drag my box, could the max on the new zoom be .2 instead of 1.0? =G=

2 3

[hobbit] New Report script available
by emarganne＠be.tiauto.com 20 Feb '07

20 Feb '07

Should be posted ;-) -----Original Message----- From: Galen Johnson [mailto:gjohnson at trantor.org] Sent: lundi 19 février 2007 13:55 To: hobbit at hswn.dk Subject: Re: [hobbit] New Report script available Hello Etienne, Just sign up for the developers list and post it there. I'll make sure it gets on the site. As I find time, I'm working on a way to ensure uniformity of submissions. Until then, I'm just taking care of doing it manually. Be sure to include any necessary installation/usage instructions. =G= Marganne, Etienne wrote: > Hello, > > I do not seam to find any way to register on that site. How do I proceed > please ? > > Thanks To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk The information contained in this transmission may contain privileged and confidential information. It is intended only for the use of the person(s) named above. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

2 1

ncv can´t handle negative values
by hansi.tesarz＠gmail.com 19 Feb '07

19 Feb '07

Hi is there an easy way to change the code so that ncv values can handle negative values. Regards - Hansi

2 1

[hobbit] New Report script available
by emarganne＠be.tiauto.com 19 Feb '07

19 Feb '07

Hello, I do not seam to find any way to register on that site. How do I proceed please ? Thanks -----Original Message----- From: Martin Flemming [mailto:martin.flemming at desy.de] Sent: lundi 19 février 2007 10:52 To: hobbit at hswn.dk Subject: Re: [hobbit] New Report script available Hi, Etienne ! I'm very interested for both of your scripts, too ! May be you can published them on http://www.trantor.org/theshire/ .. like the Admin_tool-scripts by stefan freisler Thanks & Cheers Martin ______________________________________________________ Martin Flemming DESY / IT office : Building 2b / 008a Notkestr. 85 phone : 040 - 8998 - 4667 22603 Hamburg mail : martin.flemming at desy.de ______________________________________________________ On Mon, 19 Feb 2007, Marganne, Etienne wrote: > > Hello all, > > > > As some of you may know I have already written a script filtering the csv > file generated by the bb-rep.cgi Hobbit feature. Now I have made a new one > which reads a config file report.cfg. > > > > Usage: > > Threshold type of test on which to filter name of the host (or part of > the name useful if you work with composed FQDN) > > > > It also send an e-mail to someone (modify the .pl file for that). It > generates the result on the basis of a one week time interval. Everything is > done so that once you have entered everything in your config file all you > have to do is enter the script in a crontab. > > > > If you want to have it just send me an e-mail. > > > > Etienne Marganne > > TI Automotive. > > > > > > The information contained in this transmission may contain privileged and confidential information. It is intended only for the use of the person(s) named above. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message. To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk The information contained in this transmission may contain privileged and confidential information. It is intended only for the use of the person(s) named above. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

2 1

[hobbit] bb - delete column
by hans-gunther.borrmann＠rz.uni-freiburg.de 19 Feb '07

19 Feb '07

> Add quotes to the command you wish to execute : > ./bb 24.18.160.214 "drop 24.18.160.210 smtp" Hello, I have the same problem and adding quotes does not help. -- ________________________________________________________________ Hans-Gunther Borrmann <hans-gunther.borrmann at rz.uni-freiburg.de> Rechenzentrum der Universitaet Freiburg Hermann-Herder-Str. 10, D79104 FREIBURG Tel.: +49 761/203-4652 Fax: +49 761/203-4643

3 3