- Xymon - Xymon mailman web

Tweaking connectivity and CPU alerts
by vpn.cluster.ha＠gmail.com 22 Sep '08

22 Sep '08

I have the following rules setup to alert me if the server goes down for 15 minutes or if CPU load stays higher than the threshold for 45 minutes . If I reboot a server " the server fully reboots and come back up in 5 minutes" , I get alerted for conn and cpu .. I want not to get alerted if the server rebooted and hobbit looses connectivity for 5 minutes or so and the same for CPU.. How to fix that ? The rules are listed below.. MAIL email at domain.com TIME=*:0000:2359 SERVICE=conn DURATION>15 REPEAT=45 RECOVERED MAIL email at domain.com TIME=*:0000:2359 SERVICE=cpu DURATION>45 REPEAT=60 RECOVERED

1 0

alerts file
by NMaharaj＠tcta.co.za 22 Sep '08

22 Sep '08

Hi, Can anyone mail me a copy of their alerts file please ? Thanks

1 0

Hobbit home page groups
by gleonard＠progrexion.com 19 Sep '08

19 Sep '08

I started out with just a couple machines being monitored by hobbit now I have 80+ machines and the home page has gotten a little loooong (to much scrolling) what would I have to do to have the home page show groups of servers say based on company name then be able to click in to the link to see the servers that belong to that group? Thanks in advance.. Gavin Leonard [cid:image001.gif at 01C918CF.197DEDF0] Director, Systems-Network Engineering T 801-828-1735 F 801-828-1704 E gleonard at progrexion.com<mailto:gleonard at progrexion.com> Research | Marketing | Sales Generation www.progrexion.com<http://www.progrexion.com/> This email and its contents are confidential. If you are not the intended recipient, delete this email and do not use or disclose the information within this email or its attachments. Thank you.

9 13

Hobbit question for delaying warnings
by khemrajk2003＠yahoo.com 19 Sep '08

19 Sep '08

Hi, We have windows systems reporting to the hobbit server. The memory test for them change frequently from green to yellow back to green, it does this all day throughout the day. I was wondering if there is a way to sort of set a rule that states if the alarm has been, say yellow for 15minutes, then report it to the non-green hobbit page, if it is less then 15 minutes, then do not report it (show it) on the hobbit non-green page. Thanks in advance for the help, Dev Khemraj

5 6

UPS units
by josh＠imaginenetworksllc.com 19 Sep '08

19 Sep '08

I haven't looked into the mailing list very closely in the past. From what I know, we're still using "Hobbit", right? I'm looking at getting a full suit of new UPS units and I would like to see what everyone is using out there. I would really like to find something that works well with Hobbit so I can monitor them as easy as possible. I will need to have Hobbit go red when power is down (batteries discharging) is really my main concern here. More details would be prettier, though =) Thanks in advance! Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer

9 13

[hobbit] HP-UX
by dns1407＠yahoo.com 19 Sep '08

19 Sep '08

Hi Bruce, Can you share the compiled package of the hobbit client for hp-ux pa-risc 11.23 with me? Many thanks... With kind regards, DNS ----- Original Message ---- From: "White, Bruce" <bewhite at fellowes.com> To: "hobbit at hswn.dk" <hobbit at hswn.dk> Sent: Thursday, September 18, 2008 5:43:43 PM Subject: RE: [hobbit] HP-UX I don't know about the client in the package you reference, but I built the 4.2 hobbit server on an HP-UX 11.11 machine and have copied the client portion of the build to several HPUX servers. I currently have it running on HPU-UX on 11.11, 11.23 and 11.31 clients without issues. I suspect you either need to make sure the BBDISPLAY variable is set properly in the client install or you need to check for a "ghost client" and make sure the bb-hosts file is configured properly to display the data from the client on our hobbit web page. ......Bruce -----Original Message----- From: DNS [mailto:dns1407 at yahoo.com] Sent: Thursday, September 18, 2008 4:49 AM To: hobbit at hswn.dk Subject: [hobbit] HP-UX Hi All, Can any some one tell me how to configure the hobbit client on hp-ux that can be found on http://www.razorsedge.org/~mike/software/hobbit/hpux/ ? I've installed the package on the client and what next? I don't get any data in my hobbit display server from the hp-ux client? What are the steps to get this done? Where can i find a hobbit client for HP-UX 11.23 because the package on http://www.razorsedge.org/~mike/software/hobbit/hpux/ won't install op hp-ux 11.23 Many thanks... Kind regards, DNS To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk ---------------------------------------------------- Note: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc. ---------------------------------------------------- To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

1 0

[hobbit] HP-UX
by bewhite＠fellowes.com 18 Sep '08

18 Sep '08

I don't know about the client in the package you reference, but I built the 4.2 hobbit server on an HP-UX 11.11 machine and have copied the client portion of the build to several HPUX servers. I currently have it running on HPU-UX on 11.11, 11.23 and 11.31 clients without issues. I suspect you either need to make sure the BBDISPLAY variable is set properly in the client install or you need to check for a "ghost client" and make sure the bb-hosts file is configured properly to display the data from the client on our hobbit web page. ......Bruce -----Original Message----- From: DNS [mailto:dns1407 at yahoo.com] Sent: Thursday, September 18, 2008 4:49 AM To: hobbit at hswn.dk Subject: [hobbit] HP-UX Hi All, Can any some one tell me how to configure the hobbit client on hp-ux that can be found on http://www.razorsedge.org/~mike/software/hobbit/hpux/ ? I've installed the package on the client and what next? I don't get any data in my hobbit display server from the hp-ux client? What are the steps to get this done? Where can i find a hobbit client for HP-UX 11.23 because the package on http://www.razorsedge.org/~mike/software/hobbit/hpux/ won't install op hp-ux 11.23 Many thanks... Kind regards, DNS To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk ---------------------------------------------------- Note: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc. ----------------------------------------------------

2 1

hobbit monitoring of NUT-managed UPSes
by waa-hobbitml＠revpol.com 18 Sep '08

18 Sep '08

OK, this is a long post, and for that I apologize. It contains information on changes/additions required to several hobbit config files and it also contains several scripts in their entirety (cut and pasted from a working server) I also apologize for the serious lack of any real documentation here. This post was thrown together quickly, to get the information out into the wild. Hopefully this will be addressed in the near future (by me or by someone else with a lot of free time) and this post will be properly organized and migrated to the shire. Some things to note: - First and foremost, a NUT (Network UPS Tools) server managing at least one UPS is required since this hobbit monitoring implementation pulls UPS data points from a NUT server. - This configuration has been in place for about 3 months monitoring the bat-charge, bat-voltage, in-voltage, out-voltage and ups-load on two APC1500 UPSes and has performed well for me. Your mileage may vary. - The scripts, graphs, and other configurations listed here represent the required configurations for hobbit to monitor two UPSes attached to one NUT server. You will need to modify much of this, paying careful attention to UPS names etc. In other words, everywhere you see two UPSes defined, strip one out and rename the remaining one to match your environment. - While the plan was to write the scripts so that they are able to monitor multiple UPSes connected to multiple NUT UPS servers, I know that as written they will not work properly. Once I have more NUT servers up, this will be addressed. They currently work fine with multiple UPSes attached to one NUT server, however. - Please report back to me if you are able to successfully implement this configuration. It would be encouraging to know that others have found this to be useful and it may force me to find the time to clean it up for the shire. :) - Comments are welcomed What follows is a BARE BONES listing of what changes need to be made to your hobbit system files and the scripts used to pull the data and report back to the hobbit server. Please read though each of the lists, and each of the scripts, modifying system names, UPS names, IP addresses as you see fit before simply cutting and pasting any of this. You should also read through and understand the the "how to set up custom graphs" help file here: http://your.hobbit.server.ip/hobbit/help/howtograph.html to get an understanding of how this all fits together. ----[hobbitserver.cfg changes]---- Add the following definitions to the TEST2RRD variable: "bat-charge=ncv,bat-voltage=ncv,in-voltage=ncv,out-voltage=ncv,ups-load=ncv" Add the following definitions to the GRAPHS variable: "bat-charge,bat-voltage,in-voltage,out-voltage,ups-load" Add the following NCV definition lines to the end of the file: NCV_bat-charge="apc1500115:GAUGE,apc1500117:GAUGE" NCV_bat-voltage="apc1500115:GAUGE,apc1500117:GAUGE" NCV_in-voltage="apc1500115:GAUGE,apc1500117:GAUGE" NCV_out-voltage="apc1500115:GAUGE,apc1500117:GAUGE" NCV_ups-load="apc1500115:GAUGE,apc1500117:GAUGE" ----[end of hobbitserver.cfg changes]---- ----[hobbitgraph.cfg changes]---- Add the following graph definitions to the hobbitgraph.cfg file: [bat-charge] TITLE Battery % Charge YAXIS % DEF:apc1500115=bat-charge.rrd:apc1500115:AVERAGE DEF:apc1500117=bat-charge.rrd:apc1500117:AVERAGE LINE2:apc1500115#00CCCC:apc1500-115 LINE2:apc1500117#FF0000:apc1500-117 COMMENT:\n GPRINT:apc1500115:LAST: apc1500-115 \: %5.1lf%s (cur) GPRINT:apc1500115:MAX: \: %5.1lf%s (max) GPRINT:apc1500115:MIN: \: %5.1lf%s (min) GPRINT:apc1500115:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:apc1500117:LAST: acp1500-117 \: %5.1lf%s (cur) GPRINT:apc1500117:MAX: \: %5.1lf%s (max) GPRINT:apc1500117:MIN: \: %5.1lf%s (min) GPRINT:apc1500117:AVERAGE: \: %5.1lf%s (avg)\n [bat-voltage] TITLE Battery VDC YAXIS VDC DEF:apc1500115=bat-voltage.rrd:apc1500115:AVERAGE DEF:apc1500117=bat-voltage.rrd:apc1500117:AVERAGE LINE2:apc1500115#00CCCC:apc1500-115 LINE2:apc1500117#FF0000:apc1500-117 COMMENT:\n GPRINT:apc1500115:LAST: apc1500-115 \: %5.1lf%s (cur) GPRINT:apc1500115:MAX: \: %5.1lf%s (max) GPRINT:apc1500115:MIN: \: %5.1lf%s (min) GPRINT:apc1500115:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:apc1500117:LAST: acp1500-117 \: %5.1lf%s (cur) GPRINT:apc1500117:MAX: \: %5.1lf%s (max) GPRINT:apc1500117:MIN: \: %5.1lf%s (min) GPRINT:apc1500117:AVERAGE: \: %5.1lf%s (avg)\n [in-voltage] TITLE Input AC Voltage YAXIS VAC DEF:apc1500115=in-voltage.rrd:apc1500115:AVERAGE DEF:apc1500117=in-voltage.rrd:apc1500117:AVERAGE LINE2:apc1500115#00CCCC:apc1500-115 LINE2:apc1500117#FF0000:apc1500-117 COMMENT:\n GPRINT:apc1500115:LAST: apc1500-115 \: %5.1lf%s (cur) GPRINT:apc1500115:MAX: \: %5.1lf%s (max) GPRINT:apc1500115:MIN: \: %5.1lf%s (min) GPRINT:apc1500115:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:apc1500117:LAST: acp1500-117 \: %5.1lf%s (cur) GPRINT:apc1500117:MAX: \: %5.1lf%s (max) GPRINT:apc1500117:MIN: \: %5.1lf%s (min) GPRINT:apc1500117:AVERAGE: \: %5.1lf%s (avg)\n [out-voltage] TITLE Output AC Voltage YAXIS VAC DEF:apc1500115=out-voltage.rrd:apc1500115:AVERAGE DEF:apc1500117=out-voltage.rrd:apc1500117:AVERAGE LINE2:apc1500115#00CCCC:apc1500-115 LINE2:apc1500117#FF0000:apc1500-117 COMMENT:\n GPRINT:apc1500115:LAST: apc1500-115 \: %5.1lf%s (cur) GPRINT:apc1500115:MAX: \: %5.1lf%s (max) GPRINT:apc1500115:MIN: \: %5.1lf%s (min) GPRINT:apc1500115:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:apc1500117:LAST: acp1500-117 \: %5.1lf%s (cur) GPRINT:apc1500117:MAX: \: %5.1lf%s (max) GPRINT:apc1500117:MIN: \: %5.1lf%s (min) GPRINT:apc1500117:AVERAGE: \: %5.1lf%s (avg)\n [ups-load] TITLE UPS Load % YAXIS % DEF:apc1500115=ups-load.rrd:apc1500115:AVERAGE DEF:apc1500117=ups-load.rrd:apc1500117:AVERAGE LINE2:apc1500115#00CCCC:apc1500-115 LINE2:apc1500117#FF0000:apc1500-117 COMMENT:\n GPRINT:apc1500115:LAST: apc1500-115 \: %5.1lf%s (cur) GPRINT:apc1500115:MAX: \: %5.1lf%s (max) GPRINT:apc1500115:MIN: \: %5.1lf%s (min) GPRINT:apc1500115:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:apc1500117:LAST: acp1500-117 \: %5.1lf%s (cur) GPRINT:apc1500117:MAX: \: %5.1lf%s (max) GPRINT:apc1500117:MIN: \: %5.1lf%s (min) GPRINT:apc1500117:AVERAGE: \: %5.1lf%s (avg)\n ----[end of hobbitgraph.cfg changes]---- ----[hobbitlaunch.cfg]---- Add the following script definitions to the hobbitlaunch.cfg file: [batcharge] ENVFILE /usr/local/hobbit/client/etc/hobbitclient.cfg CMD /usr/local/hobbit/client/ext/bat-charge.sh INTERVAL 5m [batvoltage] ENVFILE /usr/local/hobbit/client/etc/hobbitclient.cfg CMD /usr/local/hobbit/client/ext/bat-voltage.sh INTERVAL 5m [involtage] ENVFILE /usr/local/hobbit/client/etc/hobbitclient.cfg CMD /usr/local/hobbit/client/ext/in-voltage.sh INTERVAL 5m [outvoltage] ENVFILE /usr/local/hobbit/client/etc/hobbitclient.cfg CMD /usr/local/hobbit/client/ext/out-voltage.sh INTERVAL 5m [upsload] ENVFILE /usr/local/hobbit/client/etc/hobbitclient.cfg CMD /usr/local/hobbit/client/ext/ups-load.sh INTERVAL 5m ----[end of hobbitlaunch.cfg changes]---- ----[ external client scripts to reside in ~hobbit/client/ext ]---- --------------------- BATTERY CHARGE SCRIPT --------------------- #!/bin/bash # # waa - 20080616 - bat-charge.sh # # William A. Arlofski # Reverse Polarity, LLC # 860-824-2433 Office # http://www.revpol.com/ # # 20080319 - Initial version # # - Client script for use with Hobbit monitoring server # and NUT UPS monitoring software # ############################################################################### # # Copyright (C) 2008 William A. Arlofski - waa-at-revpol-dot-com # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License, version 2, as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # or visit http://www.gnu.org/licenses/gpl.txt # ############################################################################### # --------------------- # Set up some variables # --------------------- upsc="/usr/bin/upsc" nutserver="UPS fqdn or IP Address" upslist="apc1500-115 apc1500-117" datatest="battery\.charge:" yellowcharge="80" redcharge="65" # ---------------- # hobbit variables # ---------------- COLUMN=bat-charge COLOR=green MSG="" for server in $nutserver; do for ups in $upslist; do data=`"$upsc" "$ups"@"$server" 2>&1 | grep "$datatest" | cut -d' ' -f2` MSG="${MSG} $ups : $data" if [ "$data" -le "$redcharge" ]; then COLOR=red elif [ "$data" -le "$yellowcharge" ]; then COLOR=yellow fi done done # report status to Hobbit Server $BB $BBDISP "status $MACHINE.$COLUMN $COLOR `date` ${MSG} " exit 0 ---------------------- BATTERY VOLTAGE SCRIPT ---------------------- #!/bin/bash # # waa - 20080616 - bat-voltage.sh # # William A. Arlofski # Reverse Polarity, LLC # 860-824-2433 Office # http://www.revpol.com/ # # 20080319 - Initial version # # - Client script for use with Hobbit monitoring server # and NUT UPS monitoring software # ############################################################################### # # Copyright (C) 2008 William A. Arlofski - waa-at-revpol-dot-com # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License, version 2, as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # or visit http://www.gnu.org/licenses/gpl.txt # ############################################################################### # --------------------- # Set up some variables # --------------------- upsc="/usr/bin/upsc" nutserver="UPS fqdn or IP Address" upslist="apc1500-115 apc1500-117" datatest="battery\.voltage:" yellowvoltage="260" redvoltage="220" # ---------------- # hobbit variables # ---------------- COLUMN=bat-voltage COLOR=green MSG="" for server in $nutserver; do for ups in $upslist; do data=`"$upsc" "$ups"@"$server" 2>&1 | grep "$datatest" | cut -d' ' -f2` datanopoint=`echo "$data" | sed -e 's/\.//'` MSG="${MSG} $ups : $data" if [ "$datanopoint" -le "$redvoltage" ]; then COLOR=red elif [ "$datanopoint" -le "$yellowvoltage" ]; then COLOR=yellow fi done done # report status to Hobbit Server $BB $BBDISP "status $MACHINE.$COLUMN $COLOR `date` ${MSG} " exit 0 ----------------------- AC INPUT VOLTAGE SCRIPT ----------------------- #!/bin/bash # # waa - 20080616 - in-voltage.sh # # William A. Arlofski # Reverse Polarity, LLC # 860-824-2433 Office # http://www.revpol.com/ # # 20080319 - Initial version # # - Client script for use with Hobbit monitoring server # and NUT UPS monitoring software # ############################################################################### # # Copyright (C) 2008 William A. Arlofski - waa-at-revpol-dot-com # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License, version 2, as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # or visit http://www.gnu.org/licenses/gpl.txt # ############################################################################### # ----------------------------- # Set up some initial variables # ----------------------------- upsc="/usr/bin/upsc" nutserver="UPS fqdn or IP Address" upslist="apc1500-115 apc1500-117" datatest="input\.voltage:" yellowvoltage="1150" redvoltage="1090" # ---------------- # hobbit variables # ---------------- COLUMN=in-voltage COLOR=green MSG="" for server in $nutserver; do for ups in $upslist; do data=`"$upsc" "$ups"@"$server" 2>&1 | grep "$datatest" | cut -d' ' -f2` datanopoint=`echo "$data" | sed -e 's/\.//'` MSG="${MSG} $ups : $data" if [ "$datanopoint" -le "$redvoltage" ]; then COLOR=red elif [ "$datanopoint" -lt "$yellowvoltage" ]; then COLOR=yellow fi done done # report status to Hobbit Server $BB $BBDISP "status $MACHINE.$COLUMN $COLOR `date` ${MSG} " exit 0 ------------------------ AC OUTPUT VOLTAGE SCRIPT ------------------------ #!/bin/bash # # waa - 20080616 - out-voltage.sh # # William A. Arlofski # Reverse Polarity, LLC # 860-824-2433 Office # http://www.revpol.com/ # # 20080319 - Initial version # # - Client script for use with Hobbit monitoring server # and NUT UPS monitoring software # ############################################################################### # # Copyright (C) 2008 William A. Arlofski - waa-at-revpol-dot-com # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License, version 2, as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # or visit http://www.gnu.org/licenses/gpl.txt # ############################################################################### # --------------------- # Set up some variables # --------------------- upsc="/usr/bin/upsc" nutserver="UPS fqdn or IP Address" upslist="apc1500-115 apc1500-117" datatest="output\.voltage:" yellowvoltage="1150" redvoltage="1090" # ---------------- # hobbit variables # ---------------- COLUMN=out-voltage COLOR=green MSG="" for server in $nutserver; do for ups in $upslist; do data=`"$upsc" "$ups"@"$server" 2>&1 | grep "$datatest" | cut -d' ' -f2` datanopoint=`echo "$data" | sed -e 's/\.//'` MSG="${MSG} $ups : $data" if [ "$datanopoint" -le "$redvoltage" ]; then COLOR=red elif [ "$datanopoint" -lt "$yellowvoltage" ]; then COLOR=yellow fi done done # report status to Hobbit Server $BB $BBDISP "status $MACHINE.$COLUMN $COLOR `date` ${MSG} " exit 0 ----------------- UPS % LOAD SCRIPT ----------------- #!/bin/bash # # waa - 20080616 - ups-load.sh # # William A. Arlofski # Reverse Polarity, LLC # 860-824-2433 Office # http://www.revpol.com/ # # 20080319 - Initial version # # - Client script for use with Hobbit monitoring server # and NUT UPS monitoring software # ############################################################################### # # Copyright (C) 2008 William A. Arlofski - waa-at-revpol-dot-com # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License, version 2, as # published by the Free Software Foundation. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # or visit http://www.gnu.org/licenses/gpl.txt # ############################################################################### # --------------------- # Set up some variables # --------------------- upsc="/usr/bin/upsc" nutserver="UPS fqdn or IP Address" upslist="apc1500-115 apc1500-117" datatest="ups\.load:" yellowload="800" redload="900" # ---------------- # hobbit variables # ---------------- COLUMN=ups-load COLOR=green MSG="" for server in $nutserver; do for ups in $upslist; do data=`"$upsc" "$ups"@"$server" 2>&1 | grep "$datatest" | cut -d' ' -f2` datanopoint=`echo "$data" | sed -e 's/\.//'` MSG="${MSG} $ups : $data" if [ "$datanopoint" -ge "$redload" ]; then COLOR=red elif [ "$datanopoint" -ge "$yellowload" ]; then COLOR=yellow fi done done # report status to Hobbit Server $BB $BBDISP "status $MACHINE.$COLUMN $COLOR `date` ${MSG} " exit 0 ----[end of client external scripts ]---- -- Bill Arlofski Reverse Polarity, LLC waa at revpol.com http://www.revpol.com/ * Stop the NSA from illegally eavesdropping on your personal email * Learn about PGP and start encrypting your email today http://gnupg.org or http://www.pgp.com

1 0

link to pages
by NMaharaj＠tcta.co.za 18 Sep '08

18 Sep '08

Hi guys, I have the hobbit page up and running but when i click on disk for example, which takes me to http://hobbit.metsi.com/hobbit-cgi/bb-hostsvc.sh?HOST=hobbit.metsi.com&S ERVICE=bbd i get an http 404 error. I might have done something wrong in the installation. Please advise. Thanks To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

3 4

strange problem with hobbitping
by r.tagliaferri＠tosnet.it 18 Sep '08

18 Sep '08

Hi, i've seen than some host (in my network) has 60 msec of ping, other 0.15 msec.. If i ping/fping/hobbitping manually i've the correct time but in hobbit the graph display 60 msec. I've channged hobbitping with fping in hobbitserver.cfg and the showed value is correct: 0.15 msec.. Why? -- Roberto Tagliaferri Responsabile Progettazione & Produzione TosNet s.r.l. - Internet Service Provider r.tagliaferri at tosnet.it www.tosnet.it

1 0