- Xymon - Xymon mailman web

[hobbit] HP PA-RISC Hardware monitoring ?
by Mark.Deiss＠acs-inc.com 14 Sep '07

14 Sep '07

If you elect to use ioscan for checking for claimed hardware (using the -f option), then recommend you put in a chunk of timeout logic and send an appropriate error message if a timeout condition occurs. The HPUX ioscan command is not terribly robust (as we discovered after implementing a BB module using it). The ioscan command can hang for the sort of adverse hardware conditions you are trying to check for. This is commonly known as a "feature". - to be spoken aloud as either Eric Idle or John Cleese. To T. Yang: I never bothered putting together a tarball for www.deadcat.net; lack of energy to write up a usage document. It supports table and group files for defining classes of hardware components to be checked for (number of HBAs, tape drives, etc). If you want a tarball to play with or use as a starting point for development, let me know. The module does not have a timeout control - knocking down a hung ioscan is problematic. Will not post tarball here as Mr. Storner would probably hunt me down and toss a holy hand grenade and/or taunt me mercilessly. (What can I say, it's a Monty Python kind of day). -----Original Message----- From: T.J. Yang [mailto:tj_yang at hotmail.com] Sent: Friday, September 14, 2007 9:04 AM To: hobbit at hswn.dk Subject: RE: [hobbit] HP PA-RISC Hardware monitoring ? Hi, Thomas But ioscan is jus a scan of existing hardwares, it doesn't tell if each component is ok or not. following is an example of a C3600. root at 8519> uname -a HP-UX ilad8519 B.11.11 U 9000/785 2013140223 unlimited-user license root at 8519> model 9000/785/C3600 root at 8519> ioscan -k H/W Path Class Description ==================================================== bc 10 ioa System Bus Adapter (582) 10/0 ba Local PCI Bus Adapter (782) 10/0/12/0 lan HP PCI 10/100Base-TX Core 10/0/13/0 audio Built-in Audio 10/0/14/0 ext_bus IDE Primary Channel 10/0/14/0.0 target 10/0/14/0.0.0 disk TEAC CD-532E-B 10/0/14/0.7 target 10/0/14/0.7.0 ctl Initiator 10/0/14/1 ba PCI Core I/O Adapter 10/0/14/1/1 tty Built-in RS-232C 10/0/14/1/2 tty Built-in RS-232C 10/0/14/1/3 ext_bus Built-in Parallel Interface 10/0/14/1/4 siopc Built-in Floppy Drive 10/0/14/1/4.1 floppy HP_PC_FDC_FLOPPY 10/0/14/2 usb Built-in USB Interface 10/0/14/2.1 usbhub USB Root Hub 10/0/15/0 ext_bus SCSI C896 Ultra Narrow Single-Ended 10/0/15/0.7 target 10/0/15/0.7.0 ctl Initiator 10/0/15/1 ext_bus SCSI C896 Ultra2 Wide LVD 10/0/15/1.5 target 10/0/15/1.5.0 disk QUANTUM ATLAS10K-9LVD 10/0/15/1.6 target 10/0/15/1.6.0 disk QUANTUM ATLAS10K-9LVD 10/0/15/1.7 target 10/0/15/1.7.0 ctl Initiator 10/1 ba Local PCI Bus Adapter (782) 10/1/4/0 lan PCI Ethernet (11484320) 10/4 ba Local PCI Bus Adapter (782) 10/6 ba Local PCI Bus Adapter (782) 10/6/2/0 graphics PCI Display (103c108b) 32 processor Processor 49 memory Memory root at 8519> T.J. Yang > Date: Fri, 14 Sep 2007 10:26:49 +0200 > From: thomas.seglard at mxp4.com > To: hobbit at hswn.dk > Subject: Re: [hobbit] HP PA-RISC Hardware monitoring ? > > Hi ! > > the magical command on HP-UX (PA-RISC) is 'ioscan' on HP-UX (IA64) it's > 'machinfo'. For example, if you want information on processors or fc > hba, you could make : > > # ioscan -fknC processor | grep -i processor > # ioscan -fknC fc | grep -i fc > > or simply : > > # ioscan -fknC > > to see all possibilities. Hobbit runs just fine on this kind of > hardware, I've tested it for months on HP-UX 10.20, 11.00, 11i. You just > need 'gcc' and GNU 'make' to build clients and that's all. > Sincerly, > > ThomaS > > T.J. Yang a écrit : >> Anyone know is there a module (bb or hb) to monitor HP hardware ? >> May be better question is what is the similar command for ipmitool or prtdiage in HP-UX ? >> >> T.J. Yang >> >> _________________________________________________________________ >> Capture your memories in an online journal! >> http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us >> To unsubscribe from the hobbit list, send an e-mail to >> hobbit-unsubscribe at hswn.dk >> >> >> >> >> > > > > To unsubscribe from the hobbit list, send an e-mail to > hobbit-unsubscribe at hswn.dk > > _________________________________________________________________ Kick back and relax with hot games and cool activities at the Messenger Café. http://www.cafemessenger.com?ocid=TXT_TAGLM_SeptWLtagline To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

1 0

bbtest-net can't ping when run from hobbitlaunch.cfg
by frederic.mangeant＠steria.com 14 Sep '07

14 Sep '07

Hi all on a new Hobbit server (running CentOS 5.0 w/ Hobbit 4.2.0 + allinone patch), ping tests always fail when run from hobbitlaunch.cfg, but they do work when run by hand... SSH, HTTP tests work as expected, and this problem occurs whether I use "sudo fping" or "hobbitping". Here's the entry I'm using in hobbitlaunch.cfg : [bbnet] ENVFILE /home/hobbituser/server/etc/hobbitserver.cfg CMD bbtest-net --report --debug --ping --sslwarn=60 --sslalarm=30 --concurrency=25 --dns=ip LOGFILE $BBSERVERLOGS/bb-network.log INTERVAL 5m /var/log/hobbit/bb-network.log returns the following : [...] Command: bbtest-net '--report' '--debug' '--ping' '--sslwarn=60' '--sslalarm=30' '--concurrency=25' '--dns=ip' [...] 2007-09-14 15:54:42 Adding to combo msg: status lxtrapubr3.conn red  Fri Sep 14 15:54:31 2007 conn NOT ok 2007-09-14 15:54:42 Adding to combo msg: status lxtrapubr2.conn red  Fri Sep 14 15:54:31 2007 conn NOT ok 2007-09-14 15:54:42 Adding to combo msg: status lxtrapubr1.conn red  Fri Sep 14 15:54:31 2007 conn NOT ok 2007-09-14 15:54:42 Adding to combo msg: status lxtrapubp3.conn red  Fri Sep 14 15:54:31 2007 conn NOT ok 2007-09-14 15:54:42 Adding to combo msg: status lxtrapubp2.conn red  Fri Sep 14 15:54:31 2007 conn NOT ok 2007-09-14 15:54:42 Adding to combo msg: status lxtrapubp1.conn red  Fri Sep 14 15:54:31 2007 conn NOT ok When run by hand, the test succeeds : [...] Command: bbtest-net '--report' '--ping' '--sslwarn=60' '--sslalarm=30' '--concurrency=25' '--dns=ip' 'lxtrapubr1' '--debug' [...] 2007-09-14 15:53:07 Opening file /home/hobbituser/server/etc/bb-hosts 2007-09-14 15:53:07 Adding tcp test IP=10.156.210.37, port=22, service=ssh, silent=0 2007-09-14 15:53:07 About to do 1 TCP tests running 15 in parallel 2007-09-14 15:53:07 1 tests pending - 1 active tests 2007-09-14 15:53:07 Doing select 2007-09-14 15:53:07 select returned 1 2007-09-14 15:53:07 1 tests pending - 1 active tests 2007-09-14 15:53:07 Doing select 2007-09-14 15:53:07 select returned 1 2007-09-14 15:53:07 read 23 bytes from socket 2007-09-14 15:53:07 TCP tests completed normally 2007-09-14 15:53:07 Sending results for service conn 2007-09-14 15:53:07 Adding to combo msg: status lxtrapubr1.conn green  Fri Sep 14 15:53:07 2007 conn ok 2007-09-14 15:53:07 Flushing combo message status lxtrapubr1.conn green  Fri Sep 14 15:53:07 2007 conn ok Thanks in advance for any clue... -- Frédéric Mangeant Steria EDC Sophia Antipolis

1 1

Hobbitd not running
by NMaharaj＠tcta.co.za 14 Sep '07

14 Sep '07

Hi all, On my hobbit box I can see that hobbitd is not running. Im new to linux and hobbit and am not sure what to check. Can u help ?

2 2

Multiple graphs on a custom test status page?
by dddugan＠iastate.edu 13 Sep '07

13 Sep '07

I have written a custom test with four counters via NCV. Two of those are suitable to share a graph so I got them up and going. Everything works fine so far -- the graph appears on the status page and on trends. How/can I put a second graph on the status page (and trends) for this test? Pointers appreciated. -- Darin Dugan

1 0

Looking for external monitors for Windows Media Server, VLC and Darwin Streaming Server
by charles.goyard＠orange-ftgroup.com 13 Sep '07

13 Sep '07

Hi, we are in the process of building up a video streaming with Windows Media Server, VLC and DSS as encoders/streamers. If anyone has something to monitor them, I'm highly interrested. I just saw streamchecker.com, but I prefer something that's free software, or at least open source. Regards, -- Charles Goyard - charles.goyard at orange-ftgroup.com - (+33) 1 45 38 01 31 Orange Business Services - online multimedia // ingénierie

2 1

[hobbit] weird rrd output (using the NCV module)
by gumby3203＠gmail.com 13 Sep '07

13 Sep '07

I'm seeing a weird output for one of my custom RRD graphs, using the NCV module. The collector script on the client is creating an ncv-style output based on the bind 9 "rndc stats" command. These numbers are counter-style numbers, always increasing (until named is restarted). As such, the default DERIVE format of the NCV module is correct. The problem I'm seeing is that the numbers showing up in the RRD graph--as far as I can tell--have nothing at all to do with the actual "rndc stats" values. For instance, the "last" and "current" values of the data was: success : 283 -> 294 (11) referral : 0 -> 0 (0) nxrrset : 149 -> 156 (7) nxdomain : 298 -> 312 (14) recursion : 247 -> 254 (7) failure : 400 -> 400 (0) duplicate : 0 -> 0 (0) dropped : 0 -> 0 (0) The number in () above is the actual difference between the numbers, and the values I'm expecting to show up in the RRD graph. But the actual values that are showing up for the above example (for the "(cur)" value) are, respectively: 34.0m 0.0 20.8m 41.6m 25.6m 0.0 0.0 0.0 These numbers don't correspond to any value, anywhere. Any idea where these numbers are coming from? I can post the relevant section of the hobbitgraph.cfg file if that would help. I'm not sure if this is an RRD issue or Hobbit issue, but when I use rrdtool to dump the actual RRD file, the value for "<last_ds>" is the correct value.

2 2

How to graph RRD data from DEVMON
by klomph＠nlr.nl 13 Sep '07

13 Sep '07

I would like to create graphs from the devmon output of cisco switches. For this, I found a document "How to if_* grpah from Devmon to Hobbit". However I can't find the extra-rrd.pl program Is there anyone outthere who is able to tell me how to use the data from devmon to create a rrd graph ? Regards, Bert Klomp NLR

8 12

Upgrading Hobbit Server to 4.2.0 and old bb/hobbit clients
by digweed25＠yahoo.com 13 Sep '07

13 Sep '07

If I upgrade my server to 4.2.0 from 4.1.2p1, will I have to upgrade my current bb clients (bb16e1) and the hobbit clients? Will the bb clients and hobbit clients still work with this version of the server? Sorry, I'm new to Hobbit and have had to take on the responsibility. Thank you.

2 1

port rule evaluation in hobbit-clients.cfg
by brislin＠bc.edu 13 Sep '07

13 Sep '07

I set up a PORT rule to alert for SENDMAIL logins in the DEFAULT section of my hobbit-clients.cfg file. I wanted to override that rule for certain hosts to allow SENDMAIL logins. My hobbit-clients.cfg looks like this: ------------ HOST=luxuria PORT "LOCAL=%([.:]25)$" state=ESTABLISHED min=0 max=9 color=green "TEXT=SENDMAIL logins" DEFAULT # These are the built-in defaults. UP 1h LOAD 5.0 10.0 DISK * 90 95 MEMPHYS 100 101 MEMSWAP 70 85 MEMACT 90 97 PROC cron PROC ntpd PORT "LOCAL=%([.:]23)$" state=ESTABLISHED min=0 max=0 color=red "TEXT=TELNET logins" PORT "LOCAL=%([.:]25)$" state=ESTABLISHED min=0 max=0 color=red "TEXT=SENDMAIL logins" PORT "LOCAL=%([.:]20)$" state=ESTABLISHED min=0 max=0 color=red "TEXT=FTP logins" But I see this on the hobbit server display: green SENDMAIL logins (found 1, req. at most 9) green TELNET logins (found 0, req. at most 0) red SENDMAIL logins (found 1, req. at most 0) green FTP logins (found 0, req. at most 0) Does anybody know why both rules for the SENDMAIL port are being evaluated? The man page for hobbit-clients.cfg says: The entire file is evaluated from the top to bottom, and the first match found is used. So you should put the specific settings first, and the generic ones last. -- Jay

3 3

Posting etiquette (was: [hobbit] CPU utilisation alerts)
by henrik＠hswn.dk 13 Sep '07

13 Sep '07

Someone wrote: > Vernon, The attached 2 files are from: http://www.deadcat.net/ Please - don't post files here, which can be downloaded from a public archive. Post a link instead - it is much more efficient, and it saves me from having to delete the bounces that come back from various fascist mail filters which reject all executables. Thanks, Henrik

2 1