December 2009 - Xymon - Xymon mailman web

Building the client on Mac OS X 10.6
by mailinglist0＠skurfer.com 16 Feb '10

16 Feb '10

Has anyone managed to get the client built under Snow Leopard? What I’m doing seems pretty straightforward, but the build fails. I run `./configure --client`, answer the questions, then `make` and it bombs. MAKE="make" CC="gcc" CFLAGS="-g -O -Wall -Wno-unused -D_REENTRANT -DBIND_8_COMPAT=1 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DDarwin -I. -I`pwd`/include -DCLIENTONLY=1" LDFLAGS="" `pwd`/build/genconfig.sh Checking for socklen_t Checking for snprintf Checking for vsnprintf Checking for rpc/rpcent.h Checking for sys/select.h Checking for u_int32_t typedef Checking for PATH_MAX definition Checking for SHUT_RD/WR/RDWR definitions config.h created CC="gcc" CFLAGS="-g -O -Wall -Wno-unused -D_REENTRANT -DBIND_8_COMPAT=1 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DDarwin -I. -I`pwd`/include -DCLIENTONLY=1" LDFLAGS="" OSDEF="-DDarwin" RPATHOPT="" PCREINCDIR="" SSLFLAGS="" SSLINCDIR="" SSLLIBS="" NETLIBS="" LIBRTDEF="" BBTOPDIR="/usr/local/Cellar/xymon-client/4.2.3" BBLOGDIR="" BBHOSTNAME="" BBHOSTIP="172.27.64.14" BBHOSTOS="" LOCALCLIENT="no" make -C lib client gcc -g -O -Wall -Wno-unused -D_REENTRANT -DBIND_8_COMPAT=1 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DDarwin -I. -I/usr/local/src/xymon-4.2.3/include -DCLIENTONLY=1 -I. -I../include -o test-endianness test-endianness.c In file included from /usr/include/stdlib.h:61, from test-endianness.c:17: ./Availability.h:18: error: expected specifier-qualifier-list before ‘time_t’ ./Availability.h:32: error: expected specifier-qualifier-list before ‘time_t’ ./Availability.h:43: error: expected ‘)’ before ‘duration’ ./Availability.h:45: error: expected declaration specifiers or ‘...’ before ‘time_t’ ./Availability.h:45: error: expected declaration specifiers or ‘...’ before ‘time_t’ ./Availability.h:49: error: expected declaration specifiers or ‘...’ before ‘time_t’ ./Availability.h:49: error: expected declaration specifiers or ‘...’ before ‘time_t’ In file included from test-endianness.c:17: /usr/include/stdlib.h:289: error: expected ‘,’ or ‘;’ before ‘__OSX_AVAILABLE_BUT_DEPRECATED’ make[1]: *** [test-endianness] Error 1 make: *** [lib-client] Error 2 Thanks for any help you can provide. -- Rob McBroom <http://www.skurfer.com/>

3 6

maint mode from command line
by Kevin.Hanrahan＠elavon.com 12 Feb '10

12 Feb '10

Hi, Is there a way to issue a command to put a list of servers into maint mode instead of having to select them from the GUI? I would like to maybe automate this with a cron job Thank kh ----------------------------------------- Note: The information contained in this e-mail and in any attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. The recipient should check this e-mail and any attachments for the presence of viruses. Sender accepts no liability for any damages caused by any virus transmitted by this e-mail. If you have received this e-mail in error, please notify us immediately by replying to the message and delete the e-mail from your computer. Elavon (formerly NOVA Information Systems)

8 14

bb-snapshot - apache error 500...
by Mathias.Carlsson＠systeam.se 02 Feb '10

02 Feb '10

Hi! I've got a problem with apache2 giving me a 500 error when I try to run a snapshot report... I'm running on a Ubuntu 9.04 64-bit platform and XYmon 4.3.0 svn rev. 6177... The errorl in the web-browser is: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, webmaster at localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. ________________________________ Apache/2.2.11 (Ubuntu) PHP/5.2.6-3ubuntu4.1 with Suhosin-Patch Server at 192.9.210.146 Port 80 And the error.log says: [Mon Jun 22 11:37:00 2009] [error] [client 192.9.210.83] Premature end of script headers: bb-snapshot.sh, referer: http://192.168.210.146/xymon-cgi/bb-snapshot.sh Are there anybody who knows how to fix this?? ________________________________ Mathias Carlsson VMware | Storage | Networking | Security www.systeam.se<https://outlook.systeam.se/OWA/redir.aspx?C=86f815296451461cb0ec17a8f0b8266…> SYSteam Anderstorp * Stötabogatan 1* SE-334 24 Anderstorp T: +46 (0)371 - 58 85 29 * F: +46 (0)371 - 169 67 ________________________________ Detta meddelande innehåller information som kan vara av sekretesskaraktär eller på annat sätt hemlig och ägs av SYSteam Datakonsult i Anderstorp AB. Meddelandet är endast avsedd för personen till vilken den är adresserad. Om du inte är den avsedda mottagaren, har du ej tillåtelse att läsa, skriva, spara, kopiera, distribuera eller använda meddelandet eller del av meddelandet. Om du mottar meddelandet av misstag, var vänlig och meddela avsändaren omgående samt ta bort meddelandet och alla kopior av detsamma.

15 25

Need Help Setting up Two PAGERS/DISPLAYS/Xymon Servers
by wiskbroom＠hotmail.com 26 Jan '10

26 Jan '10

Hello; I am trying to setup 2 now, possibly up to 4 later, Xymon servers. Each server would be located at one of several data centers, each would be receiving data from clients located at their own sites. I am trying to eliminate having to go to each Xymon server individually for data and was wondering if perhaps there is a better way to show reports for the others? I've read this: http://en.wikibooks.org/wiki/System_Monitoring_with_Xymon/Administration_Gu… Unfortunately this doesn't explain how it was done, especially the bbproxy part, nor how to configure my clients (BBWin, and various unixes, and a few Cisco devices later). By the way, I have a test XP workstation with BBWin and IP's for two of my Xymon servers, one is showing no data at all for this workstation. Finally, I am of course very interested in holding a setup that does not page/email/alert for each other, except for when the other/peer is down? Thank you all in advance, .vadim

1 2

xymon pluggin not working on server
by dhaycurrie＠leisurefitness.com 13 Jan '10

13 Jan '10

I had a problem with xymon server (lost power while upgrading to Ubuntu9.10) and I had to re-install from scratch the OS. That part was easy enough, but I tried to keep all the history data, and I copied the folders into the new install. Today I realized that the folders have not been updated since I rebuilt the server because of wrong permissions, so I changed the owner to hobbit:hobbit as the other folders have, and the permission to 755. In my Ubuntu install the files are located in /var/lib/hobbit The folders I did this are: hist, histlogs, hostdata, rrd. I discover this today trying to figure out why the client is not working on the server. Fixing the permissions, fix my history reports (though I will have 36 days of no reports), but still the client information for the xymon server is not showing up, and neither are the extra scripts. With the client information I mean CPU, Disk, memory, apt. It looks like if the client was not reporting to the server (which should be localhost). I could not find how to check it out. I know how to configure BBWin since most of my network computers are Windows, but don't know much about the linux client, and it has always worked from the default install for me. Thanks David Hay Currie IT Manager Leisure Fitness <http://www.leisurefitness.com/>

14 42

[hobbit] NOPROP tag not working
by fredbo＠club-internet.fr 31 Dec '09

31 Dec '09

Great it works ! Many thanks Larry this is my new configuration with a permanent green status for the group : group-compress Oracle-AIX 0.0.0.0 -ta92- # noping prefer NOPROPRED:* NOPROPYELLOW:* NOPROPPURPLE:* NOPROPACK:* ... Fred. Try using a colon instead of an equals sign. NOPROPRED:* Thanks, Larry Barber On Thu, Dec 31, 2009 at 5:03 AM, wrote: Hello, I am using "NOPROPxxxx" tags in bb-hosts file with multipes entries, even if i use "prefer" tag it is not working. group-compress Oracle-AIX 0.0.0.0 -ta92- # noping prefer NOPROPYELLOW=* NOPROPPURPLE=* NOPROPACK=* Do you have an idea ? Regards, Fred.

1 0

NOPROP tag not working
by fredbo＠club-internet.fr 31 Dec '09

31 Dec '09

Hello, I am using "NOPROPxxxx" tags in bb-hosts file with multipes entries, even if i use "prefer" tag it is not working. group-compress Oracle-AIX 0.0.0.0 -ta92- # noping prefer NOPROPYELLOW=* NOPROPPURPLE=* NOPROPACK=* Do you have an idea ? Regards, Fred.

2 1

Alerts failed to post by XYMON
by skalluru＠osius.com 31 Dec '09

31 Dec '09

Hi, I have configured XYMON and monitoring part it is very good, But it is not acknowledging the mentioned alerts. The configuration I have given in ~/server/etc/hobbit-alerts.cfg file is as follows. HOST=osiosi.osius.com MAIL skalluru at osius.com REPEAT=1m SERVICE=cpu,disk But it is not posting any mail to the given mail address. Please help me to overcome this issue. Regards, Sriharsha Kalluru Linux System Administrator.

2 1

Interesting question
by questy＠gmail.com 30 Dec '09

30 Dec '09

I'm about to undertake writing a series of monitors for a custom app we have here in-house. This app lives over a networked filesystem (think cvfs or gpfs) that is managed by two master nodes, a master and a failover. As a result, only one node at a time can answer the query I want to give it. My conundrum: If I make the query form my Xymon server on node1 and it fails over to node2, node1 becomes completely unable to answer the question, and that check would go "red". Same for node2 back to node1. If I run the check locally on each system, while one is working, the other will go "blue". Have any of you ever written monitors for servers that carry a service in an active/passive configuration, and been able to keep the individual servers from going into some strange state as a result of failovers and such? How did you handle it? --- Jerald M. Sheets jr.

3 3

Where do I edit email body - HTML visible issue
by bwc_lr6＠easy48.com 30 Dec '09

30 Dec '09

Xymon V4.2.3 Where can I check/edit the content of the email body? I am seeing actual HTML code instead of interpreted HTML in email notifications: --- begin email text --- red System logs at Wed Dec 30 14:49:29 EST 2009 &red Critical entries in <a href="/xymon-cgi/bb-hostsvc.sh?CLIENT=gomez&SECTION=msgs:/var/log/syslog">/var/log/syslog</a> &red Dec 30 14:32:54 gomez su: [ID 366847 auth.notice] 'su root' succeeded for tsmith on /dev/pts/1 <pre> </pre> <pre> </pre> <pre> </pre> No entries in <a href="/xymon-cgi/bb-hostsvc.sh?CLIENT=gomez&SECTION=msgs:/var/adm/messages">/var/adm/messages</a> Full log <a href="/xymon-cgi/bb-hostsvc.sh?CLIENT=gomez&SECTION=msgs:/var/adm/messages">/var/adm/messages</a> Full log <a href="/xymon-cgi/bb-hostsvc.sh?CLIENT=gomez&SECTION=msgs:/var/log/syslog">/var/log/syslog</a> Dec 30 14:32:54 gomez su: [ID 367847 auth.notice] 'su root' succeeded for tsmith on /dev/pts/1 --- end email text --- Thanks, Lee

1 0